Woodworking Equipment For Sale

Capacity; Edge thickness; strips (0.4 - 22mm) Edge Thickness; coiled stock; (0.4 - 3mm) Panel thickness; 10 - 60 mm (0.39 - 2.36") Work piece width min.;85 mm (3.34") Work piece length min.; 140 mm (5.51") Feed speeds 10 - 14 - 18 - 20 MPM (33 - 46 - 59 - 65 FPM) Machine Layout Motorized top beam positioning Adjustable infeed fence Pre-Milling Station "FL-502": (2) LH & RH Rotating NC controlled spindles with automatic center positioning. Infrared Heating Lamp: Preheating workpiece edge to ensure best possible surface adhesion EVA (Hot Melt) gluepot, equipped with quick pre-melting 2 Coil Magazine Pressure Section: Servo controlled programmable pressure section with (1) large driven roller and (4) idle rollers. End Trimming; Front & rear trimming motors, swivel to 0° - 15° bevel, programmable pneumatic change Rough Trimming (first set); Top/Bottom pre- or flush trimming motors Fine Trim/Bevel/Radius Trimming; Servo controlled, pneumatic pre-positioning of motors Corner Rounding; (2) Motor corner rounding Profile Scraping; Top/Bottom 2-axis NC programmable knife positioning Glue Scraping; Flat, top/bottom, digital positioning indicators, pneumatic controlled positioning Buffing; Top & Bottom buffing motors with 150 mm (6") cloth buffing wheel. fully adjustable Hot air blowers Overhead belt hold down Centralize lubrication system External multitap transformer

BIESSE - TECHNO-LOGIC: Feed Through Boring Machine Specifications -- 125.9" (3,200 mm) Max. opening cap.; 7" (180 mm) min. opening. -- Right & left horizontal boring unit with: (20) Spindles ea. (right unit motorized). -- (8) Bottom vertical supports; each support accommodates (2) Boring blocks driven by: (2) 1.8 HP Motors (2,800 RPM); all boring blocks: 96 mm wide; 0 - 90° swivel; pneumatic locking of the drill block. -- (2) Top vertical supports; each support accommodates:(2) Boring blocks driven by: (2) 1.8 HP Motors (2,800 RPM); all boring blocks: 96 mm wide; 0 - 90° swivel; pneumatic locking of the drill block. -- All supports equipped with MICRO-DIAL Indicator for: Positioning, pneumatic locking; individual adjustment for boring block: Distance; boring depth; hydraulic brakes.Equipped with: -- Double belt through feed Conveyor with: Pneumatic squaring. -- (2) Side pressure clamps; (6) top pressure clamps. NOTE: (2) Machines available!

BIESSE ROXYL 5.5 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Features: Gluing system VC-710 with TEKNO GLUE system to cover the full range of edgebanding processes in use today!Specifications: -- Edgebanding Capacity: Edge thickness for strips min./max. 0.4 - 22 mm (0.02" - 0.87"), coiled material from 0.4 - 3 mm (0.02 - 0.12"); panel thickness from 10 - 60 mm (0.39 - 2.36"), workpiece width min. of 85 mm (3.34"); workpiece length min. 140 mm (5.51"); feed speeds 10 - 14 - 18 - 20 MPM (33 - 46 - 59 - 82 FPM). -- Machine Interface: "Roxyl-Matic" Automated machine setup, Windows PRO Operating System, 4 GB HD; USB port, keyboard, and mouse interface. -- Flat Screen (17") with color graphics interface: Programs can be easily created and recalled at will; Graphic interface makes programming easy, icon of each unit may be brought up on the screen to show the operator the status of the unit and the parameters, which can be programmed; Edgebander may be operated manually when required, without necessity to write a program.Machine In-Feed Configuration: -- Pre-Milling Station "FI-502": (2) 12000 rpm and 4.7 HP motors LH & RH Rotating NC controlled spindles with automatic center positioning. -- Anti-Adhesive "ADZ-700" Automatic Spray Unit with: Glue release agent preventing glue to adhere to work piece's surfaces. -- Infrared Heating Lamp IRL 700: Preheating workpiece edge to ensure best possible surface adhesion quality of edgebanding material. -- Edge Magazine: Automatic for processing coiled and strip edgebanding material. -- Pressure Section: Servo controlled programmable pressure section with (1) large driven roller and (5) idle rollers.Gluing System: -- EVA (Hot Melt) "QM-705": Quick premelting granulate with glue roller applicator to cover conventional edgebanding material.Workstations: -- End Trimming Unit "IN-801": 12,000 RPM, 1 HP, Front & rear trimming motors, uni-point swivel 0° - 15° bevel, programmable pneumatic change-over from flush to bevel. -- Rough/Flush Trimming Unit "RS-100": 12,000 RPM, 2.7 HP, Top/Bottom pre- or flush trimming motors -- Disc Pro-Nesting for RS-100: To permit processing of panels with holes up to a maximum diameter of 35 mm and/or grooves -- Flush/Bevel/Radius Combination Trimming Unit "RF-400": 12,000 RPM, 2.7 HP. Servo controlled, (4) NC axes driven by brushless motors and recirculating ball screws. -- PAIR OF MULTIFUNCTION CUTTERS: For tilting trimming unit. Possible machining operations: chamfering (max 25 degrees) for different thin edges + R=2mm + R=3 mm + flush solid wood trimming. -- Disc Pro-Nesting for RF-400: For tilting top and bottom edge trimming unit. It is composed of 2 copiers with bearing in addition to the vertical copier to permit processing of panels with holes up to a maximum diameter of 35 mm and/or grooves -- Corner Rounding Unit "CR-202": 12,000 RPM, 0.9 HP, (2) Motors for front/back corner and upper & lower edge profiling. -- Profile Scraping Unit "RBK-503": Top/Bottom 2-axis NC pro

BIESSE ROVER B EDGE 1667 CNC MACHINING CENTER (W/EDGEBANDING) -- Specifications:This "Bridge Gantry" machine is "IDEAL" for window, stair, door & component parts manufacturing:Working Field considering "all" units when Routing, "X" Axis is 265" (6,735 mm), "Y" axis is 62.9" (1,600 mm), "Z" axis stroke 13.6" (345 mm), max. material thickness when machining 9.6" (245 mm)When "Edge Banding" "X" Axis is 227" (5,780 mm), "Y" axis is 62.9" (1,600 mm), the max. material thickness is 2.3" (60 mm); the minimum internal radius is 30 mm & minimum external radius is 8 mm (depending on flexibility of the banding material). -- Positioning Speed: "X" & "Y" axis is 279 FPM (85 MPM), "Z" axis is 98 FPM (30 MPM); AC Brushless Servo motors with digital drive and linear guides ensure high speeds with a smooth acceleration-and-deceleration. -- Worktable: (8) Vacuum bar support rails with pneumatic lifting blades, (4) "ATS" vacuum pods per rail; set up assistance according to the program to process.(8) Pneumatic pop-up back stops, (8) pneumatic pop-up front stops, (4) pop-up side stops, (2) pop-up central stops create (2) independent work zones.Edge Banding unit:The edgebanding is automatically applied to square or irregularly shaped parts as the CNC head rotates along the "X" "Y" & "Z" axis and simultaneously rotates the tooling up to 360° on a high precision "C" axis.Floating "hot melt" glue pot & application roller with separate thermostats apply glue on the panel edge.Pneumatically controlled pressure roller with manually adjustable guides for coil & strip feeding; numerically controlled with encoder that measures strip feeding process.(1) 4-Coil tape magazine with warning sensor when the end of the spool is near; edge banding unit precisely applies 0.4 - 3 mm ABS & PVC with 60 mm (2.3") max. edge height.Pneumatically activated saw blade performs the end trimming at a 35° angle for precise fitting of overlapping joints on adjoining edges. -- Boring Unit: BH17 Boring Head with 4 HP (3 kW) motor, variable speed from 1,500 - 7,500 RPM; (10) Independent "Quick Change" vertical spindles with (6) spindles in "X" axis & (4) spindles in "Y" axis.(6) Horizontal boring spindles with (2+2) in "X" axis & (1+1) in "Y" axis; (1) "X" axis grooving for up to 120 mm dia blade. -- Machining: (2) 18 HP (13.2 kW) liquid cooled electro-spindle router with HSK F63 adaptor; 1,500 - 24,000 RPM.(1) NC controlled "C" axis for 360° horizontal processing; (1) 22-position ATC tool Plate mounted at the back of the machine. -- Operator & Machine Control: PC Front End with Biesse "BH 660" + "BiesseWORKS Advanced" + "bSOLID" + "bEDGE" + WINDOWS "XP" operating system.15" CRT monitor, full keyboard, mouse, 1.44MB & CD ROM disk drives, RS 232 & USB ports, Ethernet connection.Multitask operating system with specific function controls & and internet trouble shooting capabilities; input/output modules, axes override, 4-axes interpolation, diagnostic graphics aid for programming, machine data & to

BIESSE ROVER B EDGE 1967 CNC MACHINING CENTER (W/EDGEBANDING) -- Specifications:This "Bridge Gantry" machine is "IDEAL" for window, stair, door & component parts manufacturing. -- Working Field considering "all" units when Routing, "X" Axis is 265" (6,735 mm), "Y" axis is 75.9" (1,930 mm), "Z" axis stroke 13.6" (345 mm), max. material thickness when machining 9.6" (245 mm)When "Edge Banding" "X" Axis is 227" (5,780 mm), "Y" axis is 75.9" (1,930 mm), the max. banding material thickness is 2.55" (65 mm); the minimum internal radius is 30 mm & minimum external radius is 8 mm (depending on flexibility of the banding material). -- Positioning Speed: "X" & "Y" axis is 279 FPM (85 MPM), "Z" axis is 98 FPM (30 MPM); AC Brushless Servo motors with digital drive and linear guides ensure high speeds with a smooth acceleration-and-deceleration. -- Worktable: (10) "EPS" (Electronic Positioning System) Vacuum bar support rails with pneumatic lifting blades, (4) "ATS" (auto Table Setting) vacuum pods per rail; set up assistance according to the program to process.(10) Pneumatic pop-up back stops, (10) pneumatic pop-up front stops, (4) pop-up side stops, (4) pop-up/removable central stops create (2) independent work zones.Edge Banding unit:The edgebanding unit GU60C with glue pot automatically applied EVA glue to square or irregularly shaped parts as the CNC head rotates along the "X" "Y" & "Z" axis and simultaneously rotates the tooling up to 360° on a high precision "C" axis.Floating "hot melt" glue pot & application roller with separate thermostats apply glue on the panel edge.Pneumatically controlled pressure roller with manually adjustable guides for coil & strip feeding; numerically controlled with encoder that measures strip feeding process.(1) 4-Coil tape magazine with warning sensor when the end of the spool is near; edge banding unit precisely applies 0.4 - 3 mm ABS & PVC with 60 mm (2.3") max. edge height.Pneumatically activated saw blade performs the end trimming at a 35° angle for precise fitting of overlapping joints on adjoining edges. -- Boring Unit: BH17 Boring Head with 4 HP (3 kW) motor, variable speed from 1,500 - 6,000 RPM; (10) Independent "Quick Change" vertical spindles with (5) spindles in "X" axis & (5) spindles in "Y" axis.(6) Horizontal boring spindles with (2+2) in "X" axis & (1+1) in "Y" axis; (1) "X" axis grooving for up to 120 mm dia blade. -- Machining: (2) 18 HP (13.2 kW) Air cooled electro-spindle router with HSK F63 adaptor; 1,000 - 24,000 RPM. (1) NC controlled "C" axis for 360° horizontal processing.(21) Total ATC slots, with(1) 6-position ATC Tool Plate mounted on the "Y" carriage at the back of the machine & (1) 16-position ATC Changer on the "X" carriage. -- Operator Interface: PC Front End with Biesse "BH 660" +"bTouch" +"bSolid" + "bEdge" + Windows "WRT" (Windows Real Time) operating system.21" LCD monitor, CPU Intel(R) Core I5 or superior, 8 GB RAM memory, 128 SSD GB hard disk or superior. graphic card, LCD disp

BIESSE - STREAM B1 9.5 Edgebander (w/Premill & Corner Rounding) -- SpecificationsEdge thickness cap.: 0.01' - 0.8" (0.3 - 20 mm); Min. panel width: 2-1/2" (65 mm); panel thickness: 0.4" - 2.4" (10 - 60 mm); min. panel length: 6" (150 mm). Automatic 2-coil vertical feed magazine for coil material: Up to 3 mm thickness with automatic changeover. Patented Glue System with: Premelt; large separated granular hopper for easy filling & high gluing capacity.Reversible roller applicator with: (1) Large driven pressure roller & (6) pneumatic secondary pressure rollers. -- Operator & Machine Control "NC 410" Controller with: Graphic interface on MS-Windows 2000 Professional; 32-bit Operating System; high resolution LCD color screen;Unlimited" number of working programs; each with functions for remote control of processing units: Fault diagnostic; bar code reader adaptable; etc. Workstations -- Premilling UnitWith jump control & side copying unit for managing warped panels; 2-position infeed fence; digitals readouts. -- End TrimmingDouble motor front & rear linear end trimming unit: "IT 46" (0.4 HP / 0.3 kW - 12,000 RPM motors ea.); pneumatic chamfer setting: 0° - 15° Adjustable. -- Pre-/Rough TrimmingTop & Bottom "RS 10": 1-3/4 HP / 1.3 kW - 12,000 RPM Motor ea.; pneumatic exclusion & positioning from Control Panel. -- Radius/Bevel TrimmingTop & Bottom: 0.87 HP /0 .65 kW - 12,000 RPM Motor ea.; tiltable 0° - 30°; pneumatic exclusion from Operator Panel. -- Corner Rounding 4-Motor for leading & trailing edges. -- Profile Scraping Unit: Top & Bottom with collection box. -- Flat Glue ScrapersTop/Bottom to remove potential glue squeeze out. -- Buffing UnitTop/Bottom oscillating/tilting "SZ 30" w/pneumatic exclusion control from Control Panel; 0.67 HP / 0.5 kW - 1,400 RPM motors. -- Hot Air UnitTop/Bottom hot air blowers to reactivate/smooth heavy PVC radiused edges. -- Complete with:Motorized top pressure beam with: Powered V-belt holddown; 80 mm wide Heavy-Duty feed chain w/rubber pads. 4 HP (3 kW) Feed drive for feed variable speeds of: 33 - 79 FPM (10 - 24 MPM). Electronic positioning by NC controller with: Pneumatic Preset Stop System for most adjustments via the Control Panel on: Top & bottom trim; fine trim; scraper station; electronic frequency inverter.Includes: Electronic DC brakes on all trim motors; sound cabins for all trim workstations; outboard panel support.

BIESSE - AKRON 855, ...Edgebander with Premill & Corner Rounding (Loaded!)Specifications: -- Edge & Workpiece Capacity: 0.4 - 15 mm (0.016" - 0.59") Edge thickness; 14 - 65 mm (0.55" - 2.56") edge height; 10 - 60 mm (0.39" - 2.36") panel thickness; 140 mm (5-1/2") min. panel length; 85 mm (3.3") min. panel width. Infeed Section: -- Premilling Unit - "FI-701"Rectifies face to be edged before applying glue; horizontal & vertical movement of (2) motors on linear guides; independent automatic temporized intervention of (2) 1.8 kW (2-1/2 HP) - 12,000 RPM motors; independent copying pads on each unit, Autoset device to ensure optimum positioning of cutters according to thickness of panel being machined. -- Edge Feeding, Gluing & Pressing Unit - "VC-710"With automatic edge magazine for strip & coil stock; 3 mm (0.04") PVC guillotine; "TEKNO-GLUE" System includes: Pre-Melt "QM-701"; for quick heating & tank changing with floating & bidirectional glue roller applicator & NC axis idle presser roller movement device. -- Pressure Section: (1) Large driven & (5) Idle rollers, Independent pneumatic pressure control, Programmable servo motor for quick edge thickness changeover, Feed speeds 10, 14 & 20 MPM (33, 46 & 65 FPM).WORKSTATIONS: -- End (Edge) Trimming Unit - "IN-701-V"(2) 0.35 kW (0.5 HP) - 12,000 RPM Motors; automatic 4-position programmable chamfer from Control Panel (0°, 3.6°, 11°, 15°); sliding in slicing motion on 45° precision guide bar with oversized bearing blocks. -- Superimposed Flush (Double Edge) Trimming Unit - "RS-701"Top & bottom; (2) 0.8 kW (1 HP) - 12,000 RPM motors with superimposed motor position; 1° tilt capability; includes: Pneumatic exclusion device & Pneumatic top/bottom motor positioner. -- Tilting Top & Bottom Trimming Unit - "RI-701"(2) 0.65 kW (0.87 HP) - 12,000 RPM Motors; for radius top & bottom fine trimming; unit can be tilted 0° - 45°; includes: NC axis multiple machining device. -- Corner Rounding Unit - "CR-200V"For corner rounding; top & bottom trimming on panel edge with synthetic material & wood edgebanding up to 5 mm (0.20") max. edge thickness. -- Edge Scraping Unit - "RB-701"For finishing rounded off edges in PVC or ABS up to 5 mm (0.20") thickness includes: Pneumatic Unit Lifter. -- Flat (Glue) Scraper - "RCC-700"Top & Bottom, Removes potential excess glue before buffing unit. -- Buffing Unit, "SPL-700":Top & Bottom. -- Hot Air Blower Unit - "PH-700" - (2) STEINEL "2346" 2,000 W; reactivates color of thick plastic.Complete with: -- PC-Based Control Panel with: 15" Color LCD monitor, HF (High Frequency motors on all cutting & trimming workstations. Top pressure beam programmable via positioning motor; top pressure provided by belt holddown. 36" Dia. Coil table: Padded sound enclosure. -- Manuals (as pictured).Dimensions: 280" x 42" x 72" H. - Weight: 3,500 kG (7,750 Lbs.).

BIESSE - LATO 28: Edgebander, PLC Controlled. -- Specifications:Top pressure beam with: Large, staggered rubber rollers on precision bearings. -- Panel thickness: 10 - 45 mm; panel width: 50 mm Min.; panel length: Min. 150 mm; edgeband thickness (coils): 0.4 to 3 mm; edgeband thickness (strips): 8 mm Max.; track speed: 36 FPM. -- Machine Control: The PLC Electronic Control with Display and Keyboard. -- Work Units:Dual End Trimmers; Top & Bottom Tilt Trim Unit; Profile Scraper; Buffing. -- Complete with: -- Industrial granulate glue system; Heavy-Duty guillotine; pneumatic pressure rollers. -- Dual end trim motors on STAR guide system with: Pneumatic inclination. -- Heavy-Duty standalone top & bottom trim units with: Quick position digitals. -- Profile PVC scraper with: Pneumatic positioning; dual motor buffing.

BIESSE AKRON 245 Edgebander with Corner Rounding: Left-hand material infeed for strips & coiled edge material like PVC, ABS, veneer, and solid wood.Specifications: -- 0.4 - 8 mm (5/16") Cap. Edgebanding thickness, min. panel width 85 mm & min. length 140 mm, panel thickness 10 - 50 mm.Equipped with: -- Adjustable top pressure beam positioning. -- Automatic strip & coil feed magazine with robust shear type 3 mm PVC guillotine. -- Hot-Melt glue system (12 min. heat up time) with Teflon coated gluepot, digital thermostats with automatic kick-down when machine is in idle mode; 1" dia. glue applicator roller. -- Pressure section with (1) large dia. "non-stick" coated drive roller & (2) chrome plated idle rollers with pneumatic positioning.Workstations: -- Front & Rear End Trims (0.33 HP - 12,000 RPM motors), motors travel on (2) straight slides and pneumatic tilt 0° - 25° on horizontal plane. -- Top & Bottom Flush Trims with "Quick Change" motors (1.0 HP - 12,000 RPM motors), digital readouts for easy setup. -- 2-Motor (0.3 HP - 12,000 RPM motors) Corner rounding unit for trimming leading & trailing upper & lower edge/corners with "Fast Position" and can be used as a second Top & Bottom fine trimmer as well. -- Top & bottom Scrapers for 3 mm thick PVC banding, digitals for horizontal adjustments. -- Top & bottom Buffing (0.5 HP - 2,800 RPM motors), units tilt 0° - 30°. -- Top & bottom (2,000 Watt) Hot Air Blowers with temperature adjustment. -- Feed Speed 39 FPM, 3 HP feed drive.Complete with: -- Microprocessor for workstations & feed speed. -- Insulated sound enclosure over all trim stations with triple split dust hood, industrial lights and viewing windows. -- Extendable side panel support rail, 12 KVA - 240 Hz digital frequency inverters. - Includes: Used tooling on all workstations.

BIESSE - ROVER 24 FTS: Flat Table Machine (w/ATC/Boring) -- Specifications4' x 10' "Matrix" Grid phenolic surface table for "Nested Base Manufacturing". -- Working Capacity"X" Axis is 122" (3,100 mm);"Y" axis 49.2" (1,250 mm); "Z" axis stroke is 9.8" (250 mm); max. material thickness of 6.1" (155 mm). -- Positioning Speed "X" & "Y" Axis is 328 FPM (100 MPM); Z-axis 98 FPM (30 MPM); "X" axis uses a helical rack & pinion system; "Y" & "Z" axes use precision ball screws.All axes movement is on precision linear guides & ways & controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system. -- Work AreaFlat table design with: "Matrix" grid phenolic surface for "Nested Base Manufacturing"; (2) independent working areas.(14) External pop up reference pins with: (6) Pins on the front of the table: (4) On the back of the table; (2) on the RH side; (2) on the LH side.Prepared for (optional): "Quick fit" Vacuum outlets for optional clamping of small or awkward shaped parts; each work zone with: (1) "Quick Connect" vacuum outlet for custom vacuum fixtures. -- Boring Unit(1) 2-1/2 HP (1.7 kW) - 4,000 RPM Motor; (14) independent vertical spindles: (7) In "X" axis & (7) in "Y" axis.(6) Horizontal spindles with: (2 + 2) In "X" axis & (1 + 1) in "Y" axis; (1) 120 mm dia. "X" axis grooving saw.(1) 6-Position "Ride Along" Automatic tool changer for "on-the-fly" ATC. -- Machining(1) 10.2 HP (7.6 kW) Air-cooled electrospindle with: HSK F63 Adaptor; variable speed from 1,000 - 24,000 RPM. -- Operator & Machine ControlPC Front End with: NC 1000" + WINDOWS "NT" Operating System; 17" color CRT; 40 GB hard drive; full keyboard & mouse; Ethernet connection capabilities. -- Complete with:(1) 250 cbm/Hr Vacuum Pump; universal Autotransformer for voltages between: 200 - 600 V, 50/60 Hz; includes: Manuals, documents, safety mats, fencing. -- Actual Model is: BIESSE - ROVER 24 FTS.

BIESSE - ROVER 37XL FT: w/ATC/Boring -- Specifications 5' x 12' Phenolic "MATRIX" grid vacuum Flat Table design for: "Nested Base" processing.Working Cap. -- "X" Axis: 243-1/2" (6,180 mm); "Y" axis: 72.8" (1,850 mm); "Z" axis stroke: 7.1" (180 mm).Positioning Speed -- X" & "Y" Axes: 328 FPM (100 MPM); "Z" axis: 98 FPM (30 MPM); "X" axis: Uses helical rack & pinion system; "Y" & "Z" axes use: Precision ball screws.All axes movement: Precision linear guides & ways; controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system.Worktable -- Phenolic "MATRIX" grid vacuum table for: FT "Nesting" or single part processing using (optional) pods or jigs; (2) sides & (8) rear & (4) side pop-up pins for easy material location.Boring Unit -- (1) 4 HP (3.3 kW) - 4,000 RPM motor; (14) independent vertical spindles: (7) X-axes & (7) Y-axes; (6) horizontal spindles with: (2 + 2) in X-axis & (1 + 1) in Y-axis; (1) "X" axis grooving saw with: 150 mm dia. blade.Machining Unit -- (1) 16.3 HP (12 kW) HSD electro spindle router with: HSK F63 Adaptor; inverter driven 1,000 - 20,000 RPM with: Max. torque from 12,000 - 20,000 RPM.(1) 6-Position "Ride Along" Automatic tool changer for: "On-the-fly" ATC.Operatory Interface -- PC Front-End with: BIESSE "NC 1000 + WINDOWS "2000" operating system; 15" color CRT; 40 GB hard drive; full keyboard & mouse; Ethernet connection capabilities. Programs can be transferred via diskette or downloaded by wire.Built-in 1,500 W air conditioner for: Constant temperature & dust-free environment.Complete & supplied with: -- (1) 11 KVA stabilized autotransformer for: Voltages between 200 - 600 V; automatic "forced" lubrication system for: Guides & ball screw. -- Includes: Emergency stop rope & pressure sensitive safety mats that will instantly place machine in "pause cycle" when stepped on; sound absorbing protective head enclosure with: Debris curtain around bottom edge. -- Actual Model: BIESSE ROVER 37 XL FT.Note: There is "NO" Vacuum Pump with the machine.

BIESSE - ROVER A 3.40 FT: Flat Table Machine (w/ATC/Boring) -- Specifications4' x 12' Flat Table with: "Matrix" grid phenolic surface for "Nested Base Manufacturing". -- Working cap:"X" Axis: 145" (3,683 mm); "Y" axis: 53-1/2" (1,360 mm); "Z" axis stroke: 6.3" (160 mm); max. material thickness 5.9" (150 mm). -- Positioning Speed"X" & "Y" Axes are: 262 FPM (80 MPM); "Z" axis: 98 FPM (30 MPM); helical rack & pinion drive on "X" axis; ball screw on: "Y" & "Z" Axis. -- Work AreaFlat table design with: "Matrix" grid phenolic surface for "Nested Base Manufacturing"; (2) independent working areas; (4) external pop-up reference pins with: (3) On the back of the table & (1) on the LH side.Prepared for: (Optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; each work zone with: (1) "Quick connect" vacuum outlet for custom vacuum fixtures. -- Boring Unit (1) 2-1/2 HP (1.7 kW) - 4,000 RPM Motor: (12) Independent vertical spindles: (6) In "X" axis & (6) in "Y" axis.(6) Horizontal spindles with: (2 + 2) In "X" axis; (1 + 1) in "Y" axis; (1) 120 mm dia. "X" axis grooving saw. -- Machining(1) 10.2 HP (7.5 kW) Electrospindle with: ISO 30 Adaptor; variable speed from: 1,000 - 20,000 RPM.(1) 10-Position ride along tool changer plate for: "On the fly" ATC. -- Operator InterfacePC Front-End with: BIESSE "XP600 + WINDOWS "XP" Operating System; 15" color CRT; 40 GB hard drive; full keyboard & mouse; Ethernet connection capabilities. -- Complete with: Universal Autotransformer for voltages between 200 - 600 V, 50/60 Hz; (2) 10 HP; (7.5 kW) BUSCH Vacuum Pumps; safety mats & fencing. -- Actual Model: BIESSE ROVER A 3.40 FT.

BIESSE ROVER - B 7.65 R FTK: Flat Table Machine (w/ATC/Boring) -- Specifications5' x 20' Flat table design for "Nested Base" processing: Working field: "X" Axis: 240" (6,095 mm); "Y" axis: 61.4" (1,552 mm); "Z" axis stroke: 7" (180 mm); max. material thickness: 5.9" (150 mm). -- Positioning Speed"X" & "Y" Axes: 262 FPM (80 MPM); "Z" axis: 98 FPM (30 MPM); "X" axis uses a helical rack & pinion system; "Y" & "Z" axes use precision ball screws.All axes movement is on precision linear guides & ways: Controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system. -- WorktablePhenolic "MATRIX" grid vacuum table for: FT "Nesting" or single part processing using (optional) pods or jigs; (1 + 1) side pop-up pins for easy material location. -- Boring Unit(1) 2-1/2 HP (1.7 kW) - 4,000 RPM Motor: (14) Independent vertical spindles; (7) in "X" axis & (7) in "Y" axis; (4) horizontal spindles with: (1 + 1) in "X" axis & (1 + 1) in "Y" axis. -- Machining Unit(1) 16 HP (12 kW) liquid cooled electrospindle with: HSK-F63 Adaptor; variable speed from: 1,000 - 24,000 RPM; (1) 12-position ride along tool changer for "on the fly" ATC. -- Operator InterfacePC Front-End controls with: BIESSE "NC 1000" + WINDOWS "XP" operating system; 15" color CRT; 40 GB hard drive; full keyboard & mouse; Ethernet connection capabilities. New control with: WINDOWS 10 installed in 2025 by BIESSE; value: ...$ 14,000. -- Complete with:(2) 10 HP (7.5 kW) BUSH Vacuum Pump. Fully rebuilt in 2021; original manuals & documentation; safety fencing & perimeter devices. -- Actual Model: BIESSE Rover B 7.65 R FTK

BIESSE - ROVER A 1564 G FT: "GANTRY"5' x 21' "Matrix" Grid phenolic surface for: Nested Base Manufacturing.Working Cap."X" Axis: 251.9" (6,400 mm); "Y" axis: 62.4" (1,585 mm); "Z" axis stroke: 12.7" (324 mm);, max. material thickness: 6.7" (170 mm).Positioning Speed"X" & "Y" Axis: 279 FPM (85 MPM); "Z" axis: 98.4 FPM (30 MPM). - All axes movement: On precision linear guides & ways; controlled by: Digital, brushless AC Servo motors.All motion components maintained by: Automatic lubrication system. "X" & "Y" Axes use: Precision rack & pinion system; "Z" axis uses: Precision ball screws.WorktableFlat table design with: Matrix grid phenolic surface for Nested Base Manufacturing; (2) external pneumatic pop-up reference stops in "Y" axis; (4) pneumatic pop-up reference stops in "X" axis; (2) zone tables with: Automatic NC controlled zoning of each vacuum table. Prepared for (optional): "Quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; with: "Quick connect" vacuum outlet for custom vacuum pods & fixtures. Boring Unit(1) 2-1/2 HP (1.7 kW) Motor. Variable speed: up to 6,000 RPM; (10) independent vertical spindles with: (5) In "X" axis; (5) in "Y" axis. (4) Horizontal spindles with: (1 + 1) In "X" axis; (1 + 1) in "Y" axis; (1) "X axis grooving saw with: 120 mm Dia. blade.Machining(1) 16.1 HP (12 kW) Air-cooled HSD electro-spindle with: HSK F63 Adaptor; variable speed from: 1,000 - 24,000 RPM; (1) 16-position ride-along tool changer for "on the fly" ATC; NC controlled presetting for: measurement of the tool length. Operator & Machine ControlPC Front-End with: BIESSE "XP 600" + WINDOWS WRT Operating system. 15" TFT Flat screen monitor; server; full keyboard & mouse: All mounted on a mobile cart; Ethernet connection capabilities.Graphic interface makes full use of the operating methods typical of the Windows Operating System: Assisted graphic editor used to program machining operations; programming & guided creation of parametric macros. Import of CAD and other external software files in: DXF & CID3 format; 3D simulation of the tool path; calculation of machining time; ability to create rotate virtual faces.Complete with:25 HP TRAVAINI Vacuum Pump; safety mats & fencing; Tool Touch Off Probe; automatic lubrication system for: Linear guides; pads; recirculating ball screw; Tele-Service capabilities; Universal Autotransformer for: Voltages between 200 - 600 V 50/60 Hz.Actual Model: BIESSE ROVER A 1564 G FT.

Biesse Skipper 100 CNC Center Still under power - ready to be packed and shipped!

BIESSE AKRON 1430A EDGEBANDER. -- Specifications: 0.4 - 3 mm Thickness coil edgebanding, .0.4 - 12 mm thickness of strips (HPL, veneer, solid wood strips). -- Panel thickness minimum 10 mm and 60 mm maximum. Minimum panel length 140 mm. (5.5"), minimum panel width 85 mm (3.3). -- Automatic strip & coil feed magazine with 3 mm PVC guillotine. -- Hot Melt glue system, 10 Minute heat-up time. -- 1" Dia. Glue applicator roller; pressure section with (1) large dia. "non-stick" coated drive roller.Workstations: -- Front & Rear End Trims: (0.33 HP - 12,000 RPM motors), motors travel on (2) straight slides and pneumatic tilt 0° - 25° on horizontal plane. -- Top & Bottom Rough Trims with motors (0.75 HP - 12,000 RPM motors), digital readouts for easy setup. -- Top & Bottom Fine Trims with motors (0.5 HP - 12,000 RPM). -- Top & Bottom Profile Scrapers with digital readouts for horizontal adjustments. -- Top & Bottom Glue Scrapers, digital readout for horizontal adjustments. -- Feed Speed of 12 MPM (39 FPM), 3 HP feed drive. -- Complete with: -- Insulated sound enclosure over all trim stations with dust hood. -- Extendable side panel support rail; -- SELLER STATES: Does not have pre-mill and cannot be retrofitted.

BIESSE KLEVER 1530 G FT FLAT TABLE MACHINE: -- Specifications:5' x 10' "Bridge Gantry" machine with T-Slot "Aluminum" grid table with multiple vac ports that allows vacuum locking (vacuum pump required), or T-Slot Pressure Clamps. -- Working Capacity:"X" Axis 120" (3,050 mm), "Y" axis 60" (1,550 mm), "Z" axis stroke is 10.2" (260 mm), max. material thickness 5.9" (150 mm). -- Positioning Speed:"X" & "Y" axis 74 FPM (23 MPM), "Z" axis 41 FPM (13 MPM); "X" & "Y" Axes use a precision rack & pinion system, "Z" axis uses precision ball screws.All axes movement is on precision linear guides & ways and controlled by digital, brushless AC Servo motors.All motion components are maintained by an automatic lubrication system. -- Work Area:Flat table design with T-Slot "Aluminum" grid table with multiple vac ports that allows vacuum locking (requires a vacuum pump).(3+3) Manual flip reference stops in "Y" axis & (2) reference stops in "X" axis. -- Machining:(1) 12 HP (8.9 kW) Air cooled "HSD" Electro-spindle with HSK F63 adaptor, variable speed from 1,000 - 24,000 RPM.(1) 7-Position ATC rack (automatic tool changer). NC controlled "Touch-off Probe", a digital presetting device for the measurement of the tool length. -- Operator Interface:PC Front End with: Biesse "BH 660" +"BiesseWorks" + Windows "WRT" operating system.19" TFT flat screen monitor, full keyboard & mouse all mounted on a mobile cart. Ethernet connection capabilities. -- BiesseWorks graphic interface with assisted graphic editor used to program machining operations, parametric programming and guided creation of parametric macros.Import of CAD and other external software files in DXF and CID3 format; 3D simulation of the tool path, calculation of machining time & the ability to create rotate virtual faces. -- Complete with: Tool Touch-off Probe for automatic program update according to the tool length Automatic Lubrication system for linear guides, pads and re-circulating ball screw Universal Autotransformer for voltages between 200-600 V, 50/60 Hz. -- Actual Model is BIESSE KLEVER 1530 G FTNote: There are NO vacuum pump(s) included. The original monitor does not work; we use a replacement monitor. Control AC unit does not work.

BIESSE ROVER C 6.40 CONF 3 FT - 5' x 12' CNC Machining Center with ATC/Boring (5-AXIS PROCESSING): -- Specifications: Working Capacity: "X" Axis 144" (3,650 mm); "Y" axis 60.2" (1,530 mm); "Z" axis stroke 26.1" (663 mm); max. material thickness 10.8" (275 mm). -- Positioning Speed:"X" & "Y" Axes 328 FPM (100 MPM) each; "Z" axis 98 FPM (30 MPM). -- Worktable:(10) EPS (Electronic Positioning System) Panel supports with: (8) Lifting bars; (4) ATS vacuum pods with universal clamping systems per panel support.(2) Independent working areas with: (10) Pneumatic back stops, (2) pneumatic side stops & (2) pneumatic central stops. -- Boring Unit:4 HP (3 kW) Motor with variable speed from 1,500 - 7,500 RPM; (5) independent vertical spindles in "Y" axis.(4) Horizontal boring spindles with: (1+1) in "X" axis & (1+1) in "Y" axis. -- Machining:(1) 16 HP (12 kW) Liquid Cooled 5-AXIS electro spindle router with HSK F63 adaptor; variable speed from 3,000 - 24,000 RPM.(1) 8-Position ATC tool plate, mounter at the Router's head for "On the Fly" Tool change. -- Operator & Machine Control:PC Front-End with BIESSE "NC 1000" + "BiesseWORKS" + WINDOWS "XP" Operating System. 15" Color CRT, full keyboard, mouse, 1.44 MB & CD ROM disk drives. RS 232 & USB ports. Ethernet connection, specific function controls, & and Internet trouble shooting capabilities. Air-conditioned control cabinet & dust free environment. "BiesseWORKS" is a multitask Operating System with: Input/output modules, axes override, (4) axes interpolation, diagnostic graphics aid for programming, machine data & tool management. -- Complete with:(1) 250 m³/Hr Vacuum Pump; safety fences & mats; original documentation; user & maintenance manuals, wiring diagrams & operation of Numerical Control. -- Options Include:(1) Ingersoll Rand Air Compressor & Air Dryer, and (1) MicroAir Dust Collector, as pictured -- Actual Model is BIESSE ROVER C 6.40 CONF 3 FT

BIESSE ROVER AS FT 1224 - 4'x8' FLAT TABLE MACHINE (W/LOADING, UNLOADING): -- Specifications:4' x 8' "Matrix" grid Phenolic surface for "Nested Base Manufacturing". -- Working Capacity: "X" Axis 97" (2,465 mm), "Y" axis 50" (1,260 mm), "Z" axis stroke is 8" (203 mm), max. material thickness 6.7" (170 mm). -- Positioning Speed: "X" axis 279 FPM (85 MPM), "Y" axis 197 FPM (60 MPM), "Z" axis 66 FPM (20 MPM). All axes movement is on precision linear guides & ways and controlled by digital, brushless AC Servo motors. All motion components are maintained by an automatic lubrication system. "X" & "Y" Axes use a precision rack & pinion system; "Z" axis uses precision ball screws. -- Work area:Flat table design with HI-FLOW, multi-zone Matrix" grid Phenolic surface for "Nested Base Manufacturing". Automatic NC controlled zoning of the vacuum table with (9) individual zones. (2) Pneumatic "side" pop-up reference stops, (4) pneumatic "back" pop-up reference stops, & (6) pneumatic "front" pop-up reference stops. Prepared for (optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; with "quick connect" vacuum outlet for custom vacuum pods & fixtures. -- Boring Unit:(1) 2.5 HP (1.7 kW) Motor, variable speed up to 6,000 RPM: Boring block with (10) independent vertical spindles, (7) in "X" axis & (3) in "Y" axis. (1) "X" axis grooving saw for max 120 mm dia blade. -- Machining:(1) 12 HP (9 kW) Air cooled HSD Electro Spindle with HSK 63 adaptor, variable speed from 1,000 - 24,000 RPM. (1) 8-position ATC tool changer plate located at the back of the machine base. NC controlled presetting for the measurement of the tool length. -- Operator & Machine Control:PC Front-End with: BIESSE bTouch 21.5"; touch screen operating system. -- Complete with:(2) 10 HP Vacuum Pump; Perimeter Safety system/fencing. Automatic Lubrication System for linear guides, rack & recirculating ball screw. Tele-Service capabilities. -- Options Include: (1) NC Controlled infeed Scissor Lift table with vacuum loading; (1) Rake system; (1) NC controlled powered belt outfeed table with vacuum sweeping system; (1) Additional NC controlled powered belt outfeed table; Bar code label printer. -- Actual Model is BIESSE ROVER AS FT 1224.

?????Rover 24 FIXL CNC Router