Panel Saws For Sale

CANTEK D405A 10' Sliding Table SawSpecifications: -- Max. cutting length 126". -- Max. depth of cut: 4.13" at 90° (355 mm), 5.12" at 90° (400 mm), 2.75" at 45° (355 mm). -- Main saw: 7-1/2 HP Motor, Blade dia. 16", Arbor dia. 30 mm (1.18"), Arbor tilt 0° - 45°, & Blade speeds 3,000, 4,000, & 5,000 RPM. -- Scoring saw: 1 HP - 8,000 RPM Motor, Blade dia. 120 mm (4.72"), & Arbor dia. 20 mm (0.79").Equipped with: -- 15-1/2"; x 126"; x 35-1/4"; H Precision anodized aluminum sliding table with Prismatic rollers running on precsion ground steel guides, 21.6"; x 35"; x 35.3"; H Cast-iron fixed table, 12.6"; x 32.7"; x 35.3"; H Auxiliary table. -- Main saw blade motorized height & tilt adjustment. -- 39-1/2"; L x 3-1/2"; H Aluminum rip fence, with 130 mm (51.18";) Cutting cap. -- Aluminum extruded crosscut fence, with (2) Flip stops with miter angle adjustment, & Sliding outrigger support. -- Eye-Level touchpad control, with LED Displays for main saw blade height & tilt. -- Overhead blade guard.

CASADEI XENIA 40 10-1/2' Sliding Table Saw, with Programmable Rip FenceSpecifications: -- Max. stroke 3,200 mm (125.98"). -- Max. depth of cut: 130 mm (5.12") at 90° & 92 mm (3.62") at 45°. -- Main saw: 8 kW (11 HP) Motor, Blade dia. 300 - 400 mm (11.81 - 15.75"), Arbor dia. 1", Arbor tilt 0° - 45°, & Blade speed 3,000, 4,000, & 5,000 RPM. -- Scoring saw: 1-1/2 kW (2 HP) Motor, Blade dia. 120 mm (4.72"), Arbor dia. 3/4", & Blade speed 8,500 RPM. -- 14"; x 126"; x 35-1/2"; H Anodized aluminum sliding table, with Lock. -- 24-3/4"; x 41"; x 35-1/2"; H Fixed cast-iron table. -- Auxiliary table size 21-1/2"; x 27-1/2"; x 35-1/2"; H. -- Motorized raise, lower & tilt.Equipped with: -- 59"; L x 3-5/8"; H Programmable aluminum rip fence, with 1,270 mm (50") Cutting width cap., Squaring frame, with Telescoping crosscut fence with 3,200 mm (125.98") Cutting cap., (2) Flip stops, Idle roller, & Sliding outrigger support.Complete with: -- 36" Telescoping Angular Cutting Fence Attachment, with (2) Flip stops. -- Manual Eccentric Clamp. -- Roller Stock Support, with Height Adjustment..

FELDER - FORMAT KAPPA 450: Sliding Table SawSpecifications -- 126" (3,200 mm) Cutting length w/scoring; anodized 14-3/4" x 126" aluminum sliding table with tracking by roller bearings; locks for easy panel loading in any position; 450 mm dia. main saw blade. -- Motorized: Raise, lower, and tilting (0° - 45°) of the blade with digital readout. Equipped with: -- 7-1/2 HP Main motor; 1.0 HP scoring motor unit w/external adjustment; square crosscut fence with: (2) Stops; standard rip fence with: 1,250 mm (49") Rip cap. w/digital readout; extension table with: Miter fence and sliding outrigger support. Includes: -- (2) 4" Dia. dust outlets; swing away overarm saw guard.Also available for an extra fee: 30 KVA; 208 - 380 Volt 3-Phase Transformer.

GIBEN - ICON FAST 105 SP 3300: Front Load, Automatic Panel Saw -- Specifications 129.9" (3,300 mm) Overall cutting length; 131.8" (3,350 mm) pusher stroke; 4.1" (105 mm) max. saw blade projection; 30 HP (22.3 kW) main saw motor; 2 HP (1.5 kW) scoring saw motor. -- Saw CarriageVariable saw carriage speed from: 0 - 492 FPM (0 - 150 MPM); return speed 492 FPM (150 MPM).Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher FenceElectronically controlled overhead program fence with: (7) pneumatic gripper clamps; grippers open to 4.6" (117 mm).Forward pusher speed: 3.2 - 262 FPM (1 - 80 MPM); return speed: 62 FPM (80 MPM).Rack & pinion drive; driven by AC brushless Servo motors. -- Operator & Machine ControlPC Front-end with; GIBEN "G-Vision" + "Windows" Multitasking Operating System with: Easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of: Cutting dimensions & patterns; program cutting list; manual cuts; diagnostic & online help.Data input by adjustable keypad pendant; standard industrial keyboard, mouse & CD-ROM drive; direct downloading from office PC is possible.GIBEN "G-Vision" guarantees: Fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).GIBEN "G-Vision" includes: Onboard optimizer, which can be accessed at any time directly at the machine.The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself, and when necessary to the width of trim cut, too. -- Rear of Machine(9) Rear support rails with: 80 mm Dia. roller modules; rear of machine enclosed for safety. -- Front of Machine(2) Independent automatic side/crosscut aligning device with: 2-3/4" - 49.2" (70 - 1,250 mm) stroke.90" (2,300 mm) Long crosscut fence (front-to-back); (4) front mounted air floatation tables, 20" x 78" (510 x 2,000 mm). -- Complete with: "Quick Change" saw blade system; "REMOTE" electronic scoring adjustment. -- Actual Model: GIBEN - ICON FAST 105 SP 3300

GIBEN MATIC 401 SPT REAR LOAD, AUTO. PANEL SAW: -- Specifications:157" (4,000 mm) Overall rip cutting capacity; 5.9" (150 mm) max. saw blade projection;30 HP (22 kW), 2,934 RPM Main saw motor, 22.2" (565 mm) dia. main blade;2.4 HP (1.8 kW), 6,095 RPM Scoring saw motor, 7" (180 mm) dia. scoring blade. -- Saw Carriage:Travel speed 3 - 230 FPM (1 - 70 MPM), 230 FPM (70 MPM) constant return, powered by Inverter drive. -- Pusher Fence:Programmable pusher fence with (10) material gripper clamps (clamps open to 6.3" / 160 mm); Pusher speed 1 - 98 FPM (1 - 30 MPM), return 230 FPM (70 MPM), powered by AC Servo motor on Rack & Pinion system. -- Operator & Machine Control:PC Controller with Windows + Giben "G-DRIVE 2D" operating system; 17" color monitor. Parametrically controlled saw carriage automatically adjusts the cutting speed when cutting narrow trims front-and-back. Editing feature allows programming during operation, downloading from remote PC to the machine controller is possible. -- Rear Load Lift Table:7’ x 13-1/2’ x 18-1/2"; H 4-Column rear load lift table; max. panel size 157" x 63" (5,700 x 1,600 mm);Lift table stroke 31.5" (800 mm); max. stack height without pit or risers 27" (680 mm);Raise & lower speed 2.3 FPM (7.5 MPM); (2) material front aligners located behind the cut line. -- Complete with:(5) Air floatation tables 79" x 20" x 48-1/4" H (2,000 x 510 mm); 62-1/2"; L x 6-1/4"; H Front & Rear fences; Modular rear machine table with non-marking rollers on rails; 5’ x 13-1/2’ x 18-1/2"; H Infeed conveyor with 40-1/2"; H Back stop;(2) Pneumatic side aligners w/automatic pre-positioning by "G-Drive" control, Aligner stroke 2.25" - 87" (70 - 2,200 mm), minimum material width 3.9" (100 mm).Front safety flaps on the pressure beam; rear & side of machine provided with protective guards.6,000 Lb. Cap 48" x 96" Electric/Hydraulic Scissor Lift Platform, with Raised height (Platform surface) 48", Lowered height (Platform surface) 11", 3/4 HP - 1,725 RPM Hydraulic motor, & (4) 3" x 3" Steel tubes welded to platform surface.Actual model is GIBEN MATIC 401 SPTNOTE: Saw carriage servo motor & Axis control card are both inoperable and need to be replaced.

GIBEN SMART 75 SP FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 149" (3,800 mm) Overall cutting length, 131.8" (3,350 mm) pull back 2.95" (75 mm) max. blade projection.15 HP (11 kW) main & 1.5 HP (1.1 kW) scoring motor, 3,800 RPM main saw blade & 6,000 RPM scoring blade with external adjustment.. -- Saw Carriage:Variable saw carriage forward speed 16 - 164 FPM (5 - 50 MPM), return speed 197 FPM (60 MPM);Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (7) pneumatic gripper clamps, max clamp opening 2.56" (65 mm).Variable forward pusher speed 2.5 - 82 FPM (0.8 - 25 MPM), return speed 131 FPM (40 MPM);Pusher driven on round bar-ways by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Windows "XP" + "Pentium" processor operating system with multitasking & easy programming of very complex cutting patterns.15" CRT monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by adjustable key pad pendant, standard industrial keyboard & mouse & CD-ROM drive; direct downloading from office PC is possible."Moeller" PLC guarantees full management of all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself, and when necessary to the width of trim cut too. -- Rear of machine:(9) Rear support rails with 80 mm dia roller modules; rear of machine enclosed for safety. -- Front of machine:Automatic side/crosscut aligning device with 2.4" - 48" (60 - 1,220 mm) stroke. 90" (2,300 mm) Long crosscut fence (front-to-back);(1) Front mounted air floatation table 20" x 78" (510 x 2,377 mm) & (3) Front mounted air floatation table 20" x 60" (510 x 1,524 mm). -- Complete with:G-Lock "Quick Change" saw blade system. -- Actual Model is GIBEN SMART 75 SP

Giben Panel Saw

6' x 14' capacity 4 HP motor 220 volt 3 phase stop system on base

HENDRICK - PRO-V HP3: Automatic Vertical Panel SawSpecifications & Features -- 96" Cutting length (cuts vertically top to bottom); adjustable depth of cut up to 2-3/8"; 14" blade dia. with: 1" Dia. bore; single blade scoring; 7.5 HP main motor. -- Equipped with: -- Heavy-Duty precision machined squaring fence; Formica laminated back table surface; full length pneumatic holddown bar with: Sensitive safety tape on both sides of holddown; 1 HP drive; 2-speed automatic saw carriage; travels 30 & 60 FPM (saw travel/return adj. to cut length). -- Complete with: -- (5) Adjustable flip stops on: (3) Positioning bars; ready for Dust Collector hookup. Actual model: Pro-V HP3

Holz-her Cut 85 Panel Saw; under power until 8/21 model 6210

Holzher 1265S Vertical Panel Saw

Holz-her 1255 Panel Saw Digital Readout capacity 169” x 74” 2.36 depth of cut 3 KW motor rotates 90^

Holz-her Vertical 1265 Vertical Panel Saw

HOLZ-HER CUT 85 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:4,250 mm (167") Max. rip cut cap., 3,800 mm (149") pull back pusher stroke; 97 mm (3.8") saw blade projection.15 HP (11 kW) Main saw motor, 3 HP (2.2 kW) scoring motor. -- Saw Carriage:Variable feed speed from 3 - 328 FPM (1 - 100 MPM ), return speed of 328 FPM (100 MPM).Automatic cutting length limiter adjusts the cutting length at the end of the workpiece, automatic saw carriage lubrication. -- Pusher Fence:(7) Material gripper clamps; 259 FPM (80 MPM) forward positioning speed, 259 FPM (80 MPM) return speed.Rack & pinion movement on both sides to assure the pusher remains parallel. -- Operator & Machine Control:PC Front-End with CUTCONTROL "Direct Cut" + "OPTIPRO" + Windows 2000 operating system,15" TFT Display with unlimited program storage via floppy disk, keypad for data entry, USB & RS-232 serial port, CD ROM & 1.44 MB disk drive for additional storage of programs.CUTCONTROL offers Real-Time Graphics, diagnostic for errors or machine malfunction by means of an error signal code, incremental or absolute programming in mm or inches."Direct Cut" allows the operator to easily input information for absolute, serial, format, grooves, perforations, & position cutting which allows the machine to easily adapt to various situations & materials."OPTIPRO" is a very user friendly on-board Optimizing System for all types of various cutting patterns, including angled cutting. -- Complete with: Rear roller support rails; automatic crosscut side aligner; automatic saw blade height adjustment.(3) Air support tables, ea. 78" x 24" (1,981 x 509 mm). -- Actual Model is HOLZ-HER CUT 85 4300.

HOLZ-HER CUT 6120 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 3,900 mm (153.5") Max. rip cut cap., 3,900 mm (153.5") pull back pusher stroke; 82 mm (3.2") saw blade projection.15 HP (11 kW) Main saw motor, 1.5 HP (1.1 kW) scoring motor. -- Saw Carriage:Variable feed speed from 3 - 320 FPM (1 - 100 MPM ), return speed of 416 FPM (130 MPM).Motorized bi-directional grooving capabilities with electronic adjustment for 0 mm - 35 mm.Automatic cutting length limiter adjusts the cutting height & cutting length at the end of the workpiece. -- Pusher Fence:(7) Material gripper clamps, (1) Double Finger mounted at the cross-cut fence location for narrow strip cutting & (6) standard clamps. 82 FPM (25 MPM) forward positioning speed, 328 FPM (100 MPM) return speed.Variable pressure settings for delicate materials. Pressure beam has an integrated "Last Cut" operation to achieve a "0" mm panel dimension.Rack & pinion movement on both sides to assure the pusher remains parallel. -- Operator & Machine Control:PC Front-End with "CUTCONTROL 2" + "EASY-PLAN" + Windows operating system,19" TFT Display with unlimited program storage; keypad for data entry, USB & RS-232 serial port, "CUTCONTROL 2" offers Real-Time 3D Moving Graphics, diagnostic for errors or machine malfunction by means of an error signal code, incremental or absolute programming in mm or inches."CUTCONTROL 2" allows the operator to easily input information for absolute, serial, format, grooves, perforations, & position cutting which allows the machine to easily adapt to various situations & materials."Opti-Cut" & "EASY-PLAN" is a very user friendly on-board Optimizing System for all types of various cutting patterns, including angled cutting -- Complete with: Non-Marking rear roller support rails: Solid Air Cushion Table before & after the cutting line, ensures easy panel handling. Pneumatic crosscut side aligner, adjustable from 0" - 82.6" (0 - 2,100 mm). Side aligner is "Fully Automatic" adjustment when panel is less than 1,300 mm (51")"Quick Change" Blade system with automatic saw blade height adjustment; Electronic positioning of the scoring blade through the NC control.(3) Adjustable via "pneumatic locking" air support tables, ea. 70.8" x 23.6" (1,800 x 600 mm); -- Actual Model is HOLZ-HER CUT 6120 Dynamic

HOLZ-HER - Sector 1254: Panel Processing & Dust Collection System. Complete Panel Processing & Dust Collection System. Ideal for professional woodworking and cabinet shops. Less than 100) hours of use. -- 1. HOLZ-HER "1254" Vertical Panel Saw: Heavy-Duty steel/aluminum grid support system. Vertical & horizontal precision cuts. Integrated dust port for clean operation. Ideal for sheet goods: MDF, plywood, laminates. -- 2. HOLZ-HER "SuperCut Plus" Lift & Feed System. -- 3. ONEIDA AIR SYSTEMS Cyclone Dust Collector.

HOLZ-HER Sector 1254 Vertical Panel Saw w/ScoringSpecifications: -- 1,900 mm (74") x 4,300 mm (169") cap.; 1,810 (71-1/4") max trim height; 60 mm (2.36") depth of cut with scoring, 250 mm (9-7/8") dia. saw blade. -- Saw blade rotates 90° for rip or crosscutting; Super Cut Plus Scoring Head Attachment scoring system. Features: -- Automatically moving back grid w/interlocks to prevent cutting into back grid laths when rip cutting; retractable longitudinal stop with extended stop plate for narrow parts; -- Central work-piece support can be folded out and placed at the optimal level for machining.

HOLZMA - Optimat HPP 350 31/31: Front Load Automatic Panel SawSpecifications -- 122" (3,100 mm) Cut length; 122" (3,100 mm) pull back; (80 mm) main saw blade projection; 12 HP (9 kW) main saw motor; 3 HP (2.2 kW) scoring motor; scoring saw adjustment from the "CADMATIC 4.0" control. Saw Carriage --Travel speed from: 16 - 426 FPM (5 - 130 MPM); constant return: 426 FPM (130 MPM). Pusher Fence -- Overhead program fence with: (6) Gripper clamps; clamps open up to 90 mm (3-1/2"); rack & pinion drive on both sides; forward speed from 82 - 262 FPM (24 - 80 MPM); return speed: 262 FPM (80 MPM). Operator & Machine Control -- HOLZMA Power Control with: "CADMATIC 4.0" + "Windows XP" Operating System; virtually unlimited cutting dimensions memory; TFT 17" flat screen monitor; REAL TIME moving graphics; panel grooving & numeric display. -- Industrial keyboard: 1.44 MB Floppy & CD ROM drives; capable of online operation via RS 232 or USB port for possible link to office PC.Complete with: -- Automatic "CENTRIC" side aligner with: front & rear forks holding ripped strips squarely against the right angle fence. -- (3) Front air floatation tables: 86" x 25" (2,160 mm x 650 mm). -- Actual model: HOLZMA - OPT. HPP 350 31/31

122" (3,100 mm) Rip cutting capacity & pull back 3.74" (95 mm) saw blade projection 18 HP (13.5 kW) Main saw motor and 3 HP (2.2 kW) scoring motor; scoring saw adjustment via "CADMATIC 4.0" control. Saw Carriage:Variable saw carriage travel speed from 16 - 426 FPM (5 - 130 MPM), constant return of 426 FPM (130 MPM). Pusher Fence:Electronically controlled overhead program fence, equipped with (8) clamps that open up to 100 mm (3.9").Rack & pinion driven on both sides, forward speed of 262 FPM (80 MPM), return speed of 262 FPM (80 MPM). Operator & Machine Control: HOLZMA Power Control with "CADMATIC 4.0" + "Windows XP" operating system; virtually unlimited cutting dimensions memory.TFT 17" Flat Screen monitor, REAL-TIME moving graphics; panel grooving & numeric display.Industrial keyboard, 1.44MB Floppy & DVD R/W drives, capable of online operation via RS 232 or USB port for possible link to an office PC. Complete with:Automatic "CENTRIC" side aligner with front & rear forks, holding ripped strips squarely against the right angle fence. (1) Front air flotation table, 86" x 25" (2,160 mm x 650 mm) (2) front air flotation tables, 67" x 25" (1.700 mm x 650 mm) Rear support rails with non-marking roller modules.

HOLZMA - HPP 350 38/38: Front Load Automatic Panel Saw -- Specifications149.6" (3,800 mm) Cut length; 3.7" (93.98 mm) saw blade projection. 28 HP (13.5 kW) Main saw motor; 3 HP (2.2 kW) scoring motor; scoring saw adjustment is from the "CADMATIC 4.0" control. -- Saw CarriageTravel speed: 16 - 492 FPM (5 - 150 MPM); constant return 492 FPM (150 MPM). -- Forward speed: 82 to 295 FPM (24 - 90 MPM); return speed: 295 FPM (90 MPM). -- Operator InterfaceHOLZMA "Power Control 22" with: "CADMATIC 4.0 PROFESSIONAL" + "Windows XP" operating system. Virtually unlimited cutting dimensions memory.TFT 19" flat Touchscreen monitor, REAL-TIME moving graphics; panel grooving & numeric display.Industrial keyboard; 1.44 MB Floppy & CD ROM drives; capable of online operation via RS 232 or USB port for possible link to office PC. -- Complete with: Automatic "CENTRIC" side aligner with front & rear forks holding ripped strips squarely against the right angle fence.(3) Front air floatation tables. -- Actual model - HOLZMA HPP 300 38/38.