Woodworking Equipment For Sale
1751 Results Found
$ 4,800
SCM TOP 35 BORING MACHINE(35) Spindles on 32 mm centers, pivoting boring head, drills vertically from the top and horizontally from the rear,Specifications: -- 0° - 90° Motorized tilting of the head, can be locked at any angle between; max. panel width 1.280 mm. -- (2) 6 HP - 2,800 RPM Motor; quick boring depth setting with (6) depth stops on revolving turret, viscous damper for smooth drilling & through boring. -- Designed with: Lead screw w/veneer scale for head displacement setup.Complete with: -- Back fence w/flip stops, plus fence extension with (4) mechanical reference stops, (4) pneumatic hold-downs; 33" worktable height.
Call for Price
Call for Price
SCM Olimpic K360 Edgebander Technical Specs - Edge thickness: 0,4 - 6 mm, Panel thickness: 8 - 60 mm Feed speed: 11 m/min Compressed air: 6 bar. BO06 230v/3-Phase/60Hz
Call for Price
$ 8,250
SCM S 630 Planer with Tersa HeadSpecifications: -- 24" Width cap.; 12 HP main motor, 2 HP feed motor; 4-3/4" dia. with reversable TERSA Head rotates @ 4,500 RPM; -- 1/8" - 11-3/4" Thickness opening via motorized bed with LED readout for fine adjustment. -- Max. depth of cut 5/16"; 10" min. length of workpiece; variable infeed speed from 20 - 56 FPM.Equipped with: -- 20-3/4" x 39" Cast iron table, sectional chip breaker, sectional grooved infeed & solid outfeed rollers, adjustable bed rollers.Complete with: -- Magnetic starter and dust hood w/6" dia. dust outlet.
$ 4,950
SCM S 52 STRAIGHT KNIFE PLANER20" Width cap., knife cutterhead, 9 HP main motor (approx), 1/8" to 9-1/4" motorized opening with mechanical digital readout, max. depth of cut 5/16", 10" min. length of workpiece; (4) feed speeds at 21 - 32 - 42 & 55 FPM; table size 20-1/2" x 33-1/4". -- Equipped with: Chipbreaker, sectional grooved infeed & solid outfeed roller.
$ 5,500
20" (520 mm) Width cap.7,5 HP (5,5 kW) main motor ÷4-knife cutterhead÷1/8" to 9-1/2" (3 - 240 mm) ÷motorized opening mechanical scale for bed position max. depth of cut 5/16"÷10" min. length of workpiece ÷(4) feed speeds at 18/30/39/51 FPM (6/10/13/17 m/min.)÷table size 20-3/4" x 33-1/4". ÷Includes: Knife sharpening attachment ÷ Equipped with: Chipbreaker, sectional grooved infeed & solid outfeed roller.
$ 10,700
SCM P-170 Feed Through Moulder5-Head, 6-5/8" x 4-3/4" capacity. Specifications: -- Head sequence: Bottom 6.5 HP, right 6.5, left 6.5 HP, top 9 HP, Universal 9 HP motor; -- 1-13/16" Dia. spindles at 6,000 RPM, spindles equipped with high cap. precision bearings, all set-up adjustments on front side of machine. -- 15 - 85 FPM Feed speed, 3.6 HP Cardan (chainless) feed drive, motorized feed beam with air-loaded feed wheels.Complete with: -- 84" Long infeed table with quick lever thickness adjustment for stock removal, manual Waxilit bed lubrication. -- Note: No cutterheads or tooling included.
$ 8,900
SCM "COMPACT 23" Feed Through Moulder5-Head (B-R-L-T-U), working cap. 9-1/16" x 4-3/4".Head sequence: -- Bottom 9 HP, right/left 12 HP, top 12 HP and univ. 9 HP motor.Specifications: -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. Mechanical digital readouts for all spindles. -- Variable feed speed 1.3 HP motor, 13 to 72 FPM. -- (5) Serrated infeed wheels, (2) rubber coated feed wheels on outfeed, powered roll on outfeed table, reference engravere on first bottom head, forward/reverse job push button and full sound enclosure.Includes - Heads for all 5 Spindles, and Dust Collection Manifold.
$ 11,750
SCM K400 E --Specifications: -- Edge Capacity,0.4 to 6 mm (0.016to 1/4")for strip feeding. --Panel Capacity,min. width65 mmand 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-1/2"). --Equipped with: -- Automatic strip & coil feed magazine, Teflon coated glue pot (heat-up time 10 Min), -- 3 mm cap. guillotine, 3-roll pressure unit. -- Startouch control system with large 12" screen, graphic display with one touch, memory capacity up to 60 working programs. --Workstations: -- Double motor front & rear end trim "K-2" mounted on THK guides (0.4 HP - 12,000 RPM) , tilts 0° - 15°, rapid set up between straight and angled cutting with the automatic tilting device. -- Top & bottom flush & bevel trims "RI/800" (0.7 HP - 12.000 RPM), bevels 0° - 15° with precision digital indicators for quick setup. -- Top & bottom "RAS/V" scraping unit with container with filter for long chips; -- Top & bottom buffing unit (0.25 HP - 2,800 RPM ). -- 36 FPM Fixed feed speed, 0.75 HP feed drive.÷Complete with: --Full cover sound enclosure, mechanical digital readouts for setup adjustments, frequency inverter and outboard panel support. --Actual Model: "OLIMPIC K 400 E".
$ 10,975
SCM OLIMPIC K208ER EDGEBANDER WITH CORNER ROUNDING15/32" (12 mm) Max. edge cap., 2" max. (w/corner rounding only 1-3/4") banding height, 2-3/8" min. panel width and 6-5/16" min. length.Equipped with: -- Automatic strip & coil feed magazine w/Heavy Duty 3 mm PVC cap. guillotine. -- Teflon coated glue pot with glue roller application system complete w/automatic recycling device for unused glue. -- Digital thermostat adjustment for temperature control. -- 3-roll pressure unit w/pneumatic controls for all pressure rollers.Workstations: -- Double motor front & rear end trim (0.4 HP - 12,000 RPM motor ea.), tilts 0° - 15°, end trimmers mounted on 45° THK guide. -- Top & bottom fine/radius trimmer w/pneumatic positioning from control panel. -- Corner rounding units for leading & trailing edges. (2) 0.5 HP - 200 Cy Motors ea. -- Top & bottom PVC scraper for up to 5 mm radius. -- Top & bottom buffing unit (0.33 HP - 2,800 RPM motors). -- Hot air heating unit for PVC/ABS. -- Single 42 FPM fixed feed speed, 1 HP drive; heavy 3/4" drive chain with chain pads traveling on round & flat tracks.Complete with: -- Microprocessor for line control & glue temperature (can store up to 50 preset programs), swiveling control panel, pneumatic positioning of super finish, full cover sound enclosure, 200 Cy - 5 kW frequency inverter w/automatic motor brakes for all HF motors; includes used tooling. NOTE: Video of equipment was made in February 2021, prior to being decommissioned and placed in storage fully wrapped and ready for transport.
$ 9,000
SCM OLIMPIC K 201 HFA Automatic Compact Edgebander, with 3 mm Max. Coiled Edgebanding Thickness & High Frequency MotorsSpecifications: -- Edgebanding thickness cap. (for both coil & strip) 0.4 - 3 mm (0.02" - 0.19"). -- Min. panel length for coiled edges (Min. width 200 mm) 140 mm (5.51"). -- Min. panel width for coiled edges 65 mm (2.56"). -- Panel thickness 8 - 40 mm (0.31" - 1.57"). -- Feed speed 9 MPM (29 FPM).Equipped with: -- Automatic adjustment of all units when panel thickness is changed. -- 20" Dia. Coil table. -- Automatic coil feed magazine, Manual strip feed. -- Teflon-coated glue pot. -- 1.2 mm (0.05") Cap. guillotine. -- Eye-level control, with GEFRAN "1000" LED Temperature controller. -- Adjustable feet.Workstations: -- Single-motor end trimming unit, with (1) 0.19 kW (1/4 HP) 12,000 RPM High-frequency motor & Copying device. -- Top & bottom flush trimming unit, with (2) 0.35 kW (1/2 HP) 12,000 RPM High-frequency motors and Front & Vertical copying devices.
$ 6,950
SCM UNO CS Wide Belt Sander37" Wide cap., 1-Head machine;Specifications: -- Combination head with 4" dia. 85 shore grooved rubber contact drum and 2" wide finishing platen; -- 18 HP motor; 37" x 60" abrasive belt size; 0.87 HP 2-speed feed - 15 & 30 FPM. -- Powered raise and lower w/ LED digital readout; 6-1/4" max. thickness cap., 12-1/2 min. material length. -- Includes: 5-1/2" dia. dust outlet, infeed, and outfeed hold-down roller and load meter.
$ 25,650
SCM SANDYA - 40 M3 135, ...3-Head Wide Belt Sander 52" Width cap. Drum, Drum, Combination HeadHead Configuration:1st Head: Steel Contact 22 kW Pneumatic blowdown and alignment.2nd Head : Rubber Contact 18.5 kW Pneumatic blowdown and alignment.3rd Head: Combination Platen 15 kW Pneumatic blowdown and alignment.Note:The SCM sander does not have a brush. After the 3rd head, it has this pneumatic blow-off bar with multiple blow-offs running the length of the sanders width. Sander can be seen under power if needed.Specifications: -- 53" x 103" Abrasive belts with electronic tracking. -- All heads with abrasive belt grit compensation. -- Conveyor belt feed with dual feed speed, 5 HP motor. -- Automatic part thickness adjustment. -- Motorized thickness opening via (4) precision conveyor bed jacks with LED readout. --0" - 7-7/8" opening. -- Equipped with & Features -- Outfeed rubber covered holddown rolls or shoes on all heads. -- Motor load meters. --Infeed and outfeed conveyor extensions. -- WYE-DELTA soft start.Note: The SANDYA model "40" is more or less the same as the SANDYA "30" but more Heavy Duty.
$ 34,445
SCM SANDYA 15S (3) Head Wide Belt Sander42" Width cap, Drum, Drum, Combination HeadHead Configuration:1st Head: Steel contact roll, 7" dia., 35 HP motor;2nd Head: Rubber-covered contact roll, 24 HP motor3rd head: Combination head, rubber-covered contact roll (45 Shore) and 3" wide finishing platen, 17.4 HP motor.Specifications: -- 43" x 103" Abrasive belts -- Electronic tracking & pneumatic belt tensioning, abrasive belt grit compensation. -- Conveyor belt feed with dual feed speed, 4 HP motor -- Automatic part thickness adjustment -- Motorized thickness opening via (4) precision conveyor bed jacksEquipped With & Features: -- LED readout, 0" - 6-1/4" opening. -- Infeed & outfeed spring loaded rubber covered hold-down rollers -- Motor load meters -- Infeed and outfeed roller conveyor extensions.
$ 33,235
SCMI SANDYA 20 ( 20 M2 135 ) Wide Belt Sander 2 Heads(2) Head 53" Width capacity , Drum, Combination HeadHead Configuration:1st Head: Grooved steel calibrating roller with 250mm (10") diameter with 42 HP main motor2nd Head: Combination head with 175 mm (7") grooved rubber finishing roller and finishing platen; with 30 HP main motor.Specifications: -- Working width 53 " rubber vacuum feed mat w/ vacuum blower (Small parts option) -- Grooved rubber coated pressure roller in first position for increased panel grip with multiple pieces. -- Maximum Work Piece Thickness 6.25". -- Min. Work Piece Length 17". -- Abrasive Belt Size 53" x 103". -- Compressed Air Requirements 5 CFM @ 80 PSI. -- Dust Outlets: 2 outlets @ 7.7 inches. -- Exhaust Requirements 3,600 CFM.Feed System: -- 3 HP variable speed feed -- Feed speed is from 15 FPM to 70 FPM. -- Automatic conveyor belt tracking. -- Infeed and outfeed table extensions with (2) support rollers each.Equipped with & Features: -- Automatic Table Positioning Device. -- Electronic digital thickness readout of work table position. -- Front and rear emergency stop buttons. NOTE: Some spec's need to be verified
$ 3,950
SCMI - T110, ...Shaper w/4-Roll Power FeederSpecifications: -- 6.6 HP Motor, 1-1/4" interchangeable spindle tilts -5° to +45°. -- (5) Spindle speeds: 3,000 - 4,500 - 6,000 - 8,000 & 10,000 RPM. -- 39" x 29-1/2" Table; 13.4" max. insert opening, digital readout for spindle height setting, 6-1/8" working height under nut; adjustable fence guard assembly. -- Complete with: Mechanical spindle brake, hand spindle lock, reverse rotation switch, (5) table insert rings, and (2) 3" dust outlets. -- Includes: 4-Roll HEBROCK Power Feeder with: (4) 4-1/2" dia. & 2" wide rubber feed rollers; (4) speeds forward, and reverse adjustable mounting column w/locking joints & reversing switch.Skidding and crating, please add: ...$ 250.
$ 12,750
SCMI MINI-MAX ME 25 EDGEBANDER, SINGLE SIDED SINGLE PHASE0.4 mm to 3 mm (1/8") Max. edge thickness cap. and 1.96" max. panel thickness; semi-automatic strip & coil feed magazine (feeds coil material automatically and strips one at the time); Teflon coated glue pot w/fast (8-10) Minute heat-up time, 1.2 mm cap. guillotine.Workstations: -- "ME 25" 2-Head -- Single motor end trim (0.8 HP - 12,000 RPM motor) -- Top & bottom flush trims (0.8 HP - 12,000 RPM ea. motor), straight or bevel cutters. -- Top & bottom scraping station. -- Top & bottom buffing, 3,000 RPM motors.22 FPM Fixed feed speed with 0.8 HP drive.Complete with: Sound enclosure, out rigger panel support, frequency converter, and used tooling on the stations.Features: Control Panel on machine infeed side Machine frame made of high rigidity ribbed steel to guarantee excellent support Top thick steel pressure beam with rubber coated wheels Manual adjustment of top beam with Auto positioning of operating units Numeric indicator of selected panel thickness Glue smoke-specific exhaust outlet; centralized extraction of the dust Panel support roller which can be extended the entire length of the machine
$ 4,950
SCMI T-130 ShaperSolid Heavy Duty Shaper with 1-1/4" Dia. fixed spindle. Specifications: -- 8 HP belt drive motor with (5) spindle speeds of 3,000 - 4,500 - 6,000 - 7,000 & 10,000 RPM. -- 6" Max. cap. under nut. -- 47" x 28-1/2" Cast Iron table
$ 64,000
SCMI OLIMPIC K 560 R EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: Edge Capacity: 0.4 to 6 mm (0.016 to 1/4") for strip feeding. -- Panel Capacity: Min. panel width: 60 mm (2.375"); min. panel length: 140 mm (5-1/2").Min./max. Panel thickness: 8 - 54 mm (0.375" - 2.125"); min. distance between panels: 600 mm (24").Equipped with: -- Pre-milling Station: (2) 2.0 HP (1.5 kW) motors; rectifies/cleans panels already sized. -- Adjustable Infeed Fence: Manually preset with digital indicator; pneumatic in/out positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with: Quick change/disconnect Teflon glue pot for fast glue tanks change if needed; Heat up time approx. (10) Min. -- Pressure Section: Manual digital positioning; Teflon coated pneumatic driven roller & (2) spring loaded idle rollers.Workstations: -- End Trimming Station: (2) Front & rear 1/2 HP - 12,000 RPM motors mounted on THK guides; swivels 0° - 15° for straight & angle cutting. -- Top & Bottom Trimming Unit: (2) 0.7 HP - 12.000 RPM Motors; capable of tilting & pneumatic positioning for (3) settings, flush/bevel/radius trimming for quick setup. -- Corner Rounding Unit - "Round 2M" with: (2) 0.80 HP Independent motors that slide on THK guides. -- Top & Bottom Profile Scraping Unit with: Digital indicators; large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue scraping Unit: Eliminates any excess glue. -- Buffing Unit: (2)Top/bottom 1/4 HP - 2,800 RPM motors; tilting up to 12°.Operator & Machine Control: -- "STARTOUCH" Controller with: 12" Touchscreen display; capable of storing (100) programs. -- Machine automation by PLC function and encoder positioned in the panel feed track pinion. -- Diagnostics for a quick solution to errors: Process statistics data (i.e., number of pieces/edges) and track feeding.Features & Complete with: -- 2-Speed feed speed of 40 & 60 FPM (12 & 18 MPM); (1) 2-1/2 HP feed drive motor. -- 200 Hz frequency inverter for all trimming units. -- Manual adjustable top hold-down pressure beam. -- Full sound enclosure cover and outboard panel support. -- Actual Model is: SCM OLIMPIC K 560 R