Woodworking Equipment For Sale

Hemple CL-8 Wood Turning Lathe 20” capacity will turn to 1/4” diameter manyal feed but auto cycle up to 400/hour 220 volt 3- phase

Hemple CL-8 Wood Turning Lathe 20” capacity will turn to 1/4” diameter manyal feed but auto cycle up to 400/hour 220 volt 3- phase

HENDRICK HM3 3200 FRONT LOAD, PANEL/BEAM SAW -- Specifications:Configured for cutting solid or stacked wood sheets. Length of cut: 126";; Depth of Cut: 3";; Main Saw Motor: 15 HP. Main saw blade size: 14"; Diameter x 75mm Bore; Scoring saw blade size: 7"; Diameter x 30mm Bore. Main spindle speed: 4500 RPM; Scoring spindle speed: 6700 RPM. -- Carriage feed motor: 1.5 kW AC Servo linear rack & pinion gear system. Max Feed Rate: 2,800 “/min.; Max cutting speed: 1,800 “/min. -- Includes: Material support air table. -- Options Include: Upgraded transformer, and a TigerStop fence as pictured.

High Point 12" Resaw with Return Conveyor

Single Head Horizontal Band Re-saw System Model : HP-11P-SMART • Single saw head configuration. • Motor powered set works for accurate saw wheel elevation. • Digital position controller permits accurate saw wheel height positioning. • Automatic blade tension is controlled by hydraulic cylinder. • Variable feed speed by hydraulic motor drive. • The big pressure roller is air cylinder loaded to hold wood down firmly. Specifications HP- 11P-SMART 1. Saves Time and labor costs 2. Pneumatic pressure roller infeed 3. Digital position controller permits accurate saw wheel height 4. Easy to operate and set up Feed speed: 4-27m/min (13-90FPM) Max. cutting height: 250mm (10”) Max. cutting width: 300mm (11 3/4”) Min. workpiece length: 400mm; 205mm with extension set Max. workpiece length: 580mm Distance from blade to conveyor: 4-125mm Saw wheel Diameter: 711.5mm (28”) Saw wheel width: 22.7mm (1”) Saw blade size: 4265 x 27mm (168” x 1’) Blade speed: 2816m/min (9240FPM) Saw Motor: 15kW(20HP) Feed unit: 0.75kW(2HP) gearbox motor with frequency converter Cooling system Oil mist Blade tensioning Hydraulic system Motor for blade positioning: 0.18kW(1/4HP) Dust post: Ø4” x 4 Table height: 902.5mm Machine weight: 951kgs Machine dimensions: 2835 x 2052 x 1678mm (LxWxH)

Hoffman PU2

HOLYTEK SS-512 TS Shaper with Tilting Spindle, and Power FeederSpecifications: -- 1-1/4" Interchangeable spindle, 7.5 HP motor with (5) spindle speed settings of 3,000 - 4,000 - 6,000 - 8,000, & 10,000 RPM. -- Approx. 6" max. cap. under nut, 31" x 39" cast iron table. -- Insert ring diameters 2.8", 4/3", 6" and 8". -- Tilting spindle +10° and -45° -- Vertical movement of the spindle 7" -- sliding tableComplete with: -- Reverse rotation switch, adjustable fence assembly, and dust hood. -- 3-Roll Power Feeder

HOLYTEK LH-40 Rotary ShaperThe LH-40, full auto copy shaping machine with automatic infeed/outfeed system is a sophisticated machine used in industry to precisely shape parts based on pre-existing designs. -- Equipped with full automation, it faithfully reproduces the contours of models, guaranteeing optimal precision and uniformity in production. -- This machine is an essential tool for manufacturing processes requiring complex shapes and impeccable finishes.Specifications: -- Cutterheads motor (2x) 10HP -- Table motor 2HP/600V/60HZ/3PH -- Cut capacity 152 ~ 559 mm (6" - 22") -- Maximum diameter of cutterhead: 200 mm -- Spindle diameter 30 mm -- Spindle height 140 mm -- Table speed 1.5 ~ 5 RPM -- Cutterheads spindle speed 8000 RPM -- Table diameter 457mm (18") -- Operation speed (pieces per minute) 2 ~ 4 pieces/minute -- Machine dimensions 2850(L) x 1950(W) x 1950(H) mm (112.2" X 76" X 76") -- Net weight 2200 kg / 4840 lbsAlso included: -- Several Used cutter heads

HOLYTEK - HRS-12TK, ...Straight Line Rip SawSpecifications: -- Overhead saw arbor, 15 HP motor belt driven, 4,500 RPM arbor. -- 12" Dia. max. saw blade. -- 3-3/8" Max. depth of cut. -- 18" Max. throat depth. -- 2 HP Stepped feed speeds of 50 - 65 - 83 - 100. -- Automatic lubrication of chain. -- Magnetic controls. -- Saw is glue line rated.Equipped with & Features: -- Overhead holddown rolls. -- Double-row of antikickback fingers. -- (6) Pressure rollers. -- Infeed adjustable fence line. -- Cast Iron table with rip fence.

HOLYTEK - 252 PRC Series 200: (3) Heads Planer Sander3-Head, 1,300 mm (52") Width cap.; (1) Knife Planer head followed by: (1) Rubberized Drum, (1) Combination Drum/Platen.Specifications -- 5 mm - 125 mm (0.196" - 5") Motorized opening with: PLC Control; keypad entry; LED readout for part thickness. -- 1st Head. 150 mm (6") Dia. helical planer head; (6) rows of staggered (312) carbide inserts; each insert has: (4) Usable sides; 30 HP motor. -- 2nd Head. Rubberized Drum sanding head with: 215 mm (8-1/2") Dia. rubber covered contact roll; 25 HP motor. -- 3rd Combi Head. Drum & finishing platen; 20 HP motor. -- Sanding belt: 1,330 mm x 2150 mm (52 3/8" x 84 5/8"). -- TRU-TRAK Solid-state belt tracking. -- 3 HP Variable feed drive from: 15 - 50 FPM; GOODYEAR endless belt conveyor with automatic tracking. -- Powered lowering & raising of bed table on: (4) Columns via a 1/2 HP motor; handwheel for fine adjustment of thickness control.Complete with: -- Infeed over thickness bar; emergency stops at infeed & outfeed; air-operated disc brakes on sanding heads; electrical interlocks on main access doors; TELEMECHANIQUE electrical controls with overload protection; motor load meters.Note: Scissor Lift not included.

HOLYTEK MHB 242 Top/Bottom Wide Belt SanderHeavy-duty and powerful double surface sander providing significant time saving and improved productivity.Smooth and quiet oscillation. Belts oscillation controlled electronically by an infrared system which resists dust.Pneumatic sanding belts tensioning ensuring fast and easy belt replacement.Independent motor for each sanding belt.Pneumatic disc brake system automatically activated if power supply is interrupted, thus preserving the sanding belts from being damaged. Top and bottom 24" wide belt sanderFeatures: -- Spiral grooved 8" (D) rollers (R) and 3-1/2" (D) rollers (K) keep the sanding belts cool. -- Sanding belts: 75" Long. -- Elevation of table with digital readout and activated by independent motor. -- Control panel with: Ammeters indicating main motors current. Specifications: -- Upper Drum motor: 15 HP; 600 V; 60 Hz - 3-Ph. -- Upper Combination head motor: 10 HP; 600 V; 60 Hz - 3-Ph. -- Lower Drum motor: 15 HP; 600 V; 60 Hz - 3-Ph. -- Lower Combination head motor: 10 HP, 600 V, 60 Hz - 3-Ph. -- Feeding motors: 2 HP (x2). -- Table elevation motor: 0.5 HP. -- Electrical intensity: 53 A. -- Drums: 8" (D) - 75 DUROS. -- Max. working width: 24". -- Min. working length: 13-3/4". -- Working thickness: 3/16" ~ 5" -- Sanding belts dimensions: 25" x 75". -- Variable feeding speed: 8 - 16 MPM. -- Dust hoods Top: 4 x 4"(D); Bottom: 3 x 4"(D). -- OAL 127" x 70" x 75" high. -- Weight: 9,460 Lbs.

HOLYTEK - GES 920 RK: Wide Belt Sander(2) Heads; drum & combination head. -- 2-Head: 36" Width cap. -- 1st Head. Heavy-Duty rubber-covered contact drum; 15 HP motor. -- 2nd Head. Combination head with: 6" Dia. contact roll; 20 HP motor. -- 2 HP Feed motor; 16 - 55 FPM variable feed speed. -- 37" x 75" Abrasive belts; electronic oscillating belt system. -- Motorized table elevation with: 1/4 HP Motor; max. height: 125 mm (4.9").Equipped with: -- Digital readout; infeed & outfeed spring-loaded holddown rolls.

Holytek 37DA Wide Belt Sander (2) Heads37" Width cap., Drum, Combination Head1st Head: 7" Dia. spiral grooved rubber covered contact roller, 20 HP motor;2nd Head: Combination sanding head with 5" dia. spiral grooved rubber covered contact roll & 2" wide polishing platen, 15 HP motor.Specifications: -- Abrasive belt size of 37" x 60". -- Pneumatic belt tensioning and electronic abrasive belt tracking. -- 12" Min. working length. -- 2 HP Conveyor belt motor. -- Variable feed speed from 13 - 52 FPM.Equipped with & Features: -- Infeed & outfeed rubber covered holddown rolls; -- 0" - 4" Motorized thickness adjustment by 0.5 HP motor. -- Safety stop bar, emergency rail stop across the front of conveyor. -- Motor load meters.

HOLYTEK - YRT 100: Round End Tenoner -- Twin positioning tables with: Traversing single cutterhead design; fully automatic work cycle; tables alternate into the cutting cycle for continuous operation; rotational movement of cutterhead is externally adjusted. Capacity: -- Width of tenon: 0" - 3.9" Plus both radii; thickness of tenon: 1/8" - 1-3/16"; depth of tenon: 3/8" - 1-3/4"; 1/4" - 3-1/2" with special tooling. Specifications: -- Belt driven cutterhead, 3 HP - 6,000 RPM spindle; 1 HP motor with variable rotational movement of cutterhead; straight, simple or compound angles are easily adjusted with tables. -- (2) 14" x 9" Tilting tables: 0° - 15° Up, 0° - 30° down, and 0° - 20° to the side; each table with: Pivoting fences & miter gauges, vertical height adjustment. -- Overhead pneumatic holddowns. -- Production rate approx.: (13) Pieces per Min.

HOLYTEK MX-7S23 Through Feed Moulder:7-Head (B-R-L-T-T-B-U), working cap. 230 mm X 160 mm (9" x 6.3").Head sequence: -- Bottom 10 HP, right 10 HP, left 15 HP, top 15 HP, Top 15 HP , Bottom 15 HP and Universal 10 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- Mechanical digital readouts, "Dual mechanical" readouts on all spindles.Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter-driven, 10 HP inverted feed system with feed speed 6 - 36 Meter/min (20 - 117 FPM). -- Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. -- Phenolic insertion on the second top spindle -- Pneumatic chip breaker on the top head -- Universal head with inverted electric height adjustment -- Central lubrication, automatic table lubrication pump, side pressure roller mounted to infeed table, and sound enclosure.Net weight 12,500 Lbs

Holytek heavy duty band vertical resaw

HOLZ-HER - 1516 Case Clamp (Single-Bay) -- Specifications1-Bay Clamp; 100" x 50" x 24" clamping cap.; (1) movable, vertically positioned clamping beam with: (3) Horizontal clamps; (4) adjustable vertical clamps. -- Total of (14) pressure cylinders with: 3-7/8" Stroke & (4) adjustable counter pressure bars; 700 Lbs/cylinder pressure at 100 PSI compressed air; built-in controls with pressure gauge.

Holz-her Cut 85 Panel Saw; under power until 8/21 model 6210

HOLZ-HER CUT 85 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:4,250 mm (167") Max. rip cut cap., 3,800 mm (149") pull back pusher stroke; 97 mm (3.8") saw blade projection;15 HP (11 kW) Main saw motor, 3 HP (2.2 kW) scoring motor. -- Saw Carriage:Variable feed speed from 3 - 328 FPM (1 - 100 MPM ), return speed of 328 FPM (100 MPM).Automatic cutting length limiter adjusts the cutting length at the end of the workpiece, automatic saw carriage lubrication. -- Pusher Fence:(7) Material gripper clamps; 259 FPM (80 MPM) forward positioning speed, 259 FPM (80 MPM) return speed.Rack & pinion movement on both sides to assure the pusher remains parallel. -- Operator & Machine Control:PC Front-End with CUTCONTROL "Direct Cut" + "OPTIPRO" + Windows 2000 operating system,15" TFT Display with unlimited program storage via floppy disk, keypad for data entry, USB & RS-232 serial port, CD ROM & 1.44 MB disk drive for additional storage of programs.CUTCONTROL offers Real-Time Graphics, diagnostic for errors or machine malfunction by means of an error signal code, incremental or absolute programming in mm or inches."Direct Cut" allows the operator to easily input information for absolute, serial, format, grooves, perforations, & position cutting which allows the machine to easily adapt to various situations & materials"OPTIPRO" is a very user friendly on-board Optimizing System for all types of various cutting patterns, including angled cutting -- Complete with: Rear roller support rails; automatic crosscut side aligner; automatic saw blade height adjustment.(3) Air support tables, ea. 78" x 24" (1,981 x 509 mm). -- Actual Model is HOLZ-HER CUT 85 4300.

HOLZ-HER DYNESTIC 7505, 5x12 CNC FLAT TABLE MACHINE (W/ATC/BORING): 5' x 12' Phenolic MATRIX Table for "Nested Base" Manufacturing. -- Working Area: "X" Axis 145" (3,683 mm), "Y" axis 61.45" (1,561 mm), "Z" axis stroke is 12.4" (317 mm). -- Positioning speed: "X" & "Y" Axis 230 FPM (70 MPM), "Z" axis is 65 FPM (20 MPM). -- Worktable: Flat table designed for "Nested Base Manufacturing"; (4) Pneumatically controlled reference stop pins with (3) in "Y" axis & (1) in "X" axis. -- Boring Unit:2 HP (1.7 kW) motor for spindle speed from 1,000 to 6,000 RPM; (10) independent vertical boring spindles with (6) spindles in the "X" axis & (4) spindles in the "Y" axis;(4) Horizontal spindles with (1+1) in "X" axis & (1+1) in "Y" axis.(1) "X" axis Saw for max 120 mm dia. blade. -- Machining unit: (1) 15 HP (11 kW) Electro-spindle Router with HSK F63 adaptor, 1,000 - 24,000 RPM;(1) 12-position Linear ATC tool rack mounted to the machine base. -- Operator & Machine Control: PC Front-End with Holz-Her "CAMPUS V7" + Windows "7" operating system; 17" Color monitor; standard keyboard, mouse & CD ROM for data entry; (3) axes simultaneous control; feed rate and spindle speed override & axis movement.CAMPUS/NC Hops offers "Real Time" 2D or 3D graphics; Campus aCADemy is a full-fledged, high-performance CAD/CAM software package with versatile import features. -- Complete with:(3) 250 m³/Hr BECKER Vacuum Pumps with ECO Vac Intelligent Vacuum that automatically turns on/off vacuum units in reference to required static negative pressure; "forced" lubrication system for guides & ball screw; sound absorbing protective head enclosure. -- Actual Model is HOLZ-HER DYNESTIC 7505 5x12