Woodworking Equipment For Sale

GANNOMAT CONCEPT 70/170 EASY, ...CASE CLAMP (SEMI-AUTOMATIC):Specifications:This solid platen Case Clamp is specially designed to save space, time and labor in all production situations. Whether it is your only Clamp or a second Clamp, the "Easy 70" gives you faster cabinet assembly production.Features: -- Minimal floor space required: Length (79"), Width (32"), Height 82.6". -- Pressing force is exerted along the horizontal axis of the dowel joint by the side pressure beam. -- Continuous working surfaces (fixed sidewall and side pressure beam) eliminates setup time for carcasses with fixed shelves, stretcher rails, etc., and small carcasses like drawer boxes.Working Capacity: -- Min. clamping width 6";, max. clamping width 51.2";, max. clamping height 66.9". Equipped with: -- Adjustable Clamping cycle time w/auto. opening. -- Simple operation by directional push buttons. -- Potentiometer for stepless adjustable pressing force. -- (3) Pressing velocities and adjustment rates: 5, 10, and 25 MPS (with fine positioning or creep feed). Actual Model is GANNOMAT -CONCEPT 70/170 EASY

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT DB21 CONSTRUCTION/LINE BORINGSpecifications: --Vertical/horizontal drilling, (21) spindles. -- Drills vertically from the bottom-up, horizontally from the back. -- 21-Spindle head, 2 HP motor - 3,000 RPM spindles on 32 mm centers. Complete with: -- (3) Overhead hold-down clamps, frontal top stops, 70" (1,800 mm) Left & right side fence,line boring fence.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT INDEX 130 LOGIC CNC BORE, GLUE & DOWEL INSERTER (W/Top Drilling Option): -- Specifications:The GANNOMAT "INDEX LOGIC" is a CNC Controlled Point-to-Point Drilling/Gluing/Dowel Insertion Machine for variable programming of boring patterns. -- "X" & "Y" Axis set by manual digital indicators; "Z" Axis adjusted via CNC controlled Servo drive. -- Working width:1,300 mm (51") x 3/4" - 7-3/4" Width x 1/2" - 3-1/8" material thickness with (2) field, LH/RH (mirror-image). - Table size: 4-1/2" x 52-3/4" x 35" H with 9" x 52" extension. -- (6) Vertical hold-down cylinders for horizontal part processing. -- Dowel Driving & Horizontal Boring: Integrated into (1) station; the dowel driving unit is located alongside the boring station; both units are mounted on (1) support. -- Horizontal Drilling & Boring Station: Head can be setup for 6 - 8 or 10 mm, dowel length from 25 - 50 mm (currently set up for 8 mm dia. x 50 mm long dowels). -- Doweling Station: Vibrating hopper; insertion head & dowel driving with air impulse; glue valves are controlled individually at the control cabinet; central adjustment for the amount of glue by means of a digital timer. -- Operator Interface: MS-XP & GANNOMAT Production software; 15" color touchscreen monitor interface; USB drive; bar code capable. -- Controller & Drive: BECKHOFF "C3620 TWINCAT V2.10". -- Complete with: (1) Glue tank; (1) water tank; auto lubrication system, and all original manufacturer's machine documentation. -- Included Options: An optional Single Spindle top drilling spindle with a Z-axis control. Barcode Scanner easily retrieves prewritten stored programs in an instant. -- Actual Model is: GANNOMAT INDEX 130 LOGIC.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

GANNOMAT CONCEPT 70 PRIMUS CASE CLAMP (SEMI-AUTOMATIC) -- Specifications:Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams; specially designed to save time and labor.Working Capacity: -- Length: Min. 6" (150 mm) & max. 98.4" (2,500 mm); Height min. 6" (150 mm) & max. 51" (1,300 mm); Depth min. 6" (150 mm) 27.5" (700 mm). -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Adjustable clamping cycle time: 0 – 30 minutes (changeable to seconds and hours) with automatic opening. Operator Interface: -- SIGMA "TEH Etek DCT281" Display with: LCD Display; soft touch keypad for the following functions: Manual operation, (6) programs for (8) motion sequences, clamping, pressure regulation, workpiece count, clamping time, etc. -- Actual model is GANNOMAT CONCEPT 70 PRIMUS 721.

Boring/Inserting aggregate travel on profile bearing guides with: 3 spindle boring unit – Horizontal 1 Spindle Routing unit – Horizontal 1 Blowing, gluing, dowel inserting unit for a single selected dowel 6 – 12mm diameter, 25 – 60 mm length – Horizontal Barcode reader Fully automatic electronically controlled central lubrication Closed gluing system with variable setting of glue amount by touch screen Selector switch GLUE/WATER for quick rinsing of entire system 1½ gallon glue Stainless steel container 1½ gallon water Stainless steel container Glue control warning light 1 Right-hand stop, 1 left-hand stop, and 1 center stop, all removable (3) Starting buttons for individual processing of 1-4 work pieces (8) Pneumatic clamping cylinders for work piece thickness max 80mm, work piece length minimum 70mm 1 Exhaust ducting, with connection diameter 80mm Programming by menu-based software; Beckhoff 15? Touchscreen display Operating system: WINDOWS 7