Woodworking Equipment For Sale

Williams 125 CJS1 Hammermill

Williams 125 HP Hammermill 230/460 3-phase

Williams and Hussey 2007 W7-S model 206 planer/molder good condition Ser# 00452 Weight 250 ish Max thick 7”, Max width 7” Multi pass Baldor motor Powered infeed and out feed New std knives available at W/H for app 100/set Custom knives available from W/H

Manufacturer’s Soecification Feed Type:0-19 fpm, variable feed Motor:2 HP (3450 rpm) Voltage:240V Maximum Profile Depth ¾ inMinimum Stock Length 9 inMaximum Profile Width 6 ¾ inMinimum Stock Thickness ¼ in Maximum Height Above Final Cut 3/16 in Maximum Stock Thickness 8 in Planes 7 in WideOverall Machine Dimensions:28 inL x 22 inW x 50 inHWorking Height:35 in

Model 206 For smooth moulding and planing; (1) 2 HP Baldor motor, 7,000 RPM spindle speed, variable feed rate of 1 - 19 FPM includes "Deluxe" variable feed control with magnetic drop out switch and cords. Built in Multi-Pass system and Guide sytem -- Capacity: Max. material width 7", material thickness from 3/4" to 8" max., min. 9" stock length. Max. profile depth 3/4" and max. profile width 6-3/4", planes 7" wide and can do a 7" radius with optional jig; working height 31", overall height 45", overall width 20". -- Includes: Table guides, dust hood, belt, pulley, planing knives, welded steel stand, custom moulding catalog, oil, and operator's manual. -- With OPTIONAL accessories like the elliptical jig you can make arches and elliptical mouldings, please add...$ 700. Also available in 115/1/60 and 230/460V/3/60. Weight: Approx. 242 Lbs.

WILLIAMS & HUSSEY Planer/MoulderSmooth moulding & planing; used for making: Custom trim, molding, & millwork. Creates a variety of moldings, plus oval & round frames and curved-top frames.Specifications. (1) 2 HP BALDOR Motor; 3,450 RPM spindle speed; feed rate: 15 FPM.Capacity: Max. material width 6"; material thickness from: 3/4" - 8" Max.; min. 9" stock length. - Max. profile depth: 3/4"; max. profile width: 6-3/4"; planes: 7" wide & 7" radius with: Optional jig; working height: 31"; overall height: 45", overall width: 20".NOTE: Specifications based on Model "154" & listed electrical plate; exact model is unknown/not on machine.

100 HP 230/460 volt 20” x 19” inlet 9” x 28” outlet no hopper

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

Wintersteiger DSG Sonic Frame Saw

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

WISE 5200 Twin Stair Trencher; 2" x 12" Max. stringer size, Semi-Automatic operation.Specifications: -- 5 HP Belted motor to "top & bottom" 10,000 RPM spindles, T & B heads are arranged to jump in & out to facilitate open plan stairs; -- Automatic pneumatic clamping of stringers, spring loaded side pressure to keep stringers against the fence. Features: -- Mirror-image routing on (1) pair of stringers at one time, graduated template automatically sets up to stated tread & rise, cuts standard wedge taper for both treads and risers.Includes: -- Heavy Duty TYLER Spindles, built-in jump dado function, clamp, and feed system.

WISE Model 1525 Hinge Jamb Machine; Designed for quick and accurate hinge patterns.Specifications: -- Jamb length up to 8', hinge size unlimited, radius 1/4" or 5/8", jamb width unlimited. -- Equipped with: durable accurate linear glide base, quick change out for variable parts. -- No templates are required, and additional stop bars are available.

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

2022 Wood-Mizer MR200 Gang saw 21" width x 7 3/4" thick capacity 5-50 FPM feed rate 2 adjustable arbors SN: MR200EC80U-540 MD500 chip extractor also available

Woodflow Technologies Lateral Transfer 12’ length 24” working width Up 100 ft minute. Chains rise and fall Heavy Duty Lumber style, auto sense up and down

WOODMASTER 37" SINGLE DRUM, DRUM SANDER(1) Head, 38" width cap., 7" min. part length, 5 HP motor; 6" dia. dynamically balanced, hollow steel drum uses 4" wide Velcro adaptable abrasives (steel drum is covered with Velcro). -- Equipped with: 0.5 HP Gear motor, variable conveyor feed speed from 0 - 16 FPM. -- Complete with: (1) Infeed & (1) outfeed rubber covered holddown roller and (1) 5" dust port, and Reversing switch. - Includes: Extra Sandpaper (approximate value... $400)

WOODMASTER TOOLS W-725 25" W x 7" Thick Single-Sided Planer/MoulderSpecifications: -- Planing width 25", Planing thickness 5/16" - 7". -- Max. depth of cut 3/16". -- Min. length 8-1/2". -- Table size 25" x 49". -- Variable feed speeds 0 - 34 FPM. Equipped with: -- 3-Knife cutterhead & 7-1/2 HP - 1,725 RPM TEFC Motor. -- (2) Non-marking rubber feed rollers, with 1/2 HP - 40 RPM Feed motor.Complete with: -- Router Attachment.

Woods 525 BM-2 Tongue Head End Matcher Woods Grove Head End Matcher 525 BM-2 Serial # 32651 Conveyors and Transfer Tables MISC. Parts for Woods Equipment Hasko HSFF Standard Machine - Hydraulic Feed Table With 7' x 8' Deck and All Standard Equipment Call For Price (417) 234-5384

Woods 502M hardwood flooring machine