Strapping Machines Banding For Sale

The Landen ZP-97 tool is the 2nd generation battery hand strapping tool to feature the DC brushless motor that delivers higher torque output and saves battery power resulting in increased cycle numbers. The ZP97 Battery Powered Hand Strapping Tool is lighter than the now replaced ZP96, coming in at only 7.5lbs, thanks to its new 18V Li-Ion Battery. The new design of the ZP97 allows for convenient single handed operation which conforms with CE safety regulations. The ZAPAK ZP97 Hand Strapping Tool has a pre-programmed touch panel which controls the Tension & Sealing to perform even more precisely.

AMERICAN BALER - PAC-4029-730R, ...Auto-Tie Baler(2) Available !Specifications: -- Motor: 30 HP. -- Main cylinder: 7". -- Feed opening: 40" L x 27-1/2" W. -- Charge box: 29"; x 42"; x 49";. -- Bale size: 30" x 43" Variable. -- Normal operating pressure: 3,000 PSI. -- Compressing force: 115,453 Lbs.Features: -- PARKER PLC controls. -- Regen hydraulics.

AMERICAN BALER - 5042-10-30: Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 10". -- Main motor: 30 HP. -- Charge opening: 50 x 42".

AMERICAN BALER - 6042H-830: Auto-Tie Horizontal Baler with Shear BladeSpecifications -- Cylinder: 8". -- Main motor: 30 HP. -- Feed opening: 60" x 42".Equipped with: -- PLC and push-button controls. -- Shearing blade.

AMERICAN BALER - 5042-AT-840: Manual-Tie Horizontal Baler w/Infeed ConveyorSpecifications -- Feed Opening: 49-1/2" x 40-1/2". -- Bale size: 42" x 42" x Variable. -- Main cylinder: 8" x 66" Stroke. -- Main motor: 40 HP. -- No load cycle time: 25 Sec. -- Under load cycle time: 43 Sec.

BALEMASTER - 4550G-10: Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening. -- 50 HP. -- 10"; Cylinder. -- 30"; x 40"; x Variable Bale.

BALEMASTER - EO-650: Horizontal Auto-Tie Baler Specifications: • 25 HP Motor.• 8"; Main Cylinder.• Hopper Opening: 46";x 50";.• Bale Size: 48"; x 30"; x (variable).• Main Ram Face Pressure: 75 PSI.• System Pressure: 2,000 PSI.• Total Compression Force: 100,500 Lbs.

CP CD1000 CAN DENSIFIER -- 900 to 1,500 Lbs/Hr capacity -- Fully automatic solid-state Controller -- Density: 40 Lbs per cu. ft. allowing 140,000 Lbs in 50' railcars or 40,000 Lbs in 40' Trailers. -- 10 HP - 3/60/208/230/460 Volt Hydraulic Power Unit

CAN-PAK - CD-3000: Complete Can Densifier -- Motor: 25 HP.Dimensions• Height: 9’-2";.• Width: 3’-10";.• Length: 13’-5";.• Machine weight: 8,000 Lbs.• Conveyor weight: 1,000 Lbs.• Conveyor: 11’-5"; High x 20-1/2"; wide x 13’ long.Specifications• 25 HP Power unit.• 460 Volt, 3-phase wiring.• Solid-state programmable controller.• Thermostatically controlled hydraulic oil cooler.• 1 Cubic yard hopper.• 120-gallon hydraulic tank.• 20-1/2"; Wide infeed conveyor with: 3/4 HP Motor. Direct drive gear reducer. Magnetic head pulley. Steel reject chute.

CD600 - CP Manfacturing: Can Densifier -- Successful recycling is efficient recycling. There is simply no more efficient way to handle aluminum cans than to densify them.The "CD600" separates and densifies 500 - 1,000 Lbs of aluminum cans per hour into 18 Lbs biscuits. These uniformly sized biscuits stack & band easily without pallets into 2,500 Lbs bundles for easy handling.Densifying allows you to ship max. weight loads - meaning you will never pay to ship air again. The CD600 is unusually quiet and remarkably compact. It is entirely automatic, eliminating the need for constant attendance while automatically adjusting to accept whole or flattened cans.Features Processes from 500 to 1,000 Lbs/Hr aluminum cans. Automatically adjusts for whole or mixed cans to give the max. Lbs/Hr hour throughput. Fully automatic cycle eliminates the need for constant attendance. All machine functions are operated by solid-state, programmable controllers. Ideal densifier for indoor use due to: Low noise level; compact size; attractive design. Min. number of moving parts: Fully enclosed for max. operational safety. Removable bale chamber liners. Rugged construction & innovative design. Biscuit eject guard.

CRAM-A-LOT - HX-60: Closed Door Baler with Cart Dumper & Infeed ConveyorSpecifications: --The CRAM-A-LOT "HX-60 HH" & "HX" Series Balers are ideal for warehouses and designed for ease of installation, operation, and maintenance. -- CRAM-A-LOT® HH & HX Series Balers are: Built with extra Heavy-Duty construction; ideal for warehouses & recyclers who deal with large quantities of corrugated and paper products.Baler is designed for long hours of operation and can operate either manually or automatically with photocell control. Optional custom-engineered Feed Conveyors and Cart Dumper Systems efficiently control Baler feed rates for optimum performance in a complete Baling System.Standard Features include:ANSI Z245.5 Compliant: All Compactors meet or exceed ANSI Z245.5 safety standards.UL/CUL Listed Control Panels.UHMW Ram Shoes: Adjustable to assure straight tracking and readily replaceable, should the need arise.Oil Sight Gauge: Oil level at a glance.Oil Filter: Replaceable "spin-on" cartridge to keep your oil clean.Heavy-Duty Controls: NEMA 4-Rated pushbutton controls with "key lockable" start switch.Automatic single-cycle operation. -- Bale Size: 60" x 30" x 40". -- Bale Weight: Up to (OCC) 1,400 Lbs. --Throughput: (OCC) 2-1/2 Bales /Hr. -- Cylinder: 7".

CRAM-A-LOT - SCR-T2-34: 34-Yard Self-Contained CompactorsSpecifications -- Cylinder: (2) 4". -- Main motor: 10 HP. -- Feed opening: 41″ x 58″ (1,041 mm x 1,473 mm). -- Capacity: 34-Yard. -- Ram force: Up to 24 tons.

DAC-1200 - DENSACAN: Can DensifierThe "DAC-1200" is fully automatic and will run continuously as long as cans are fed.Features -- Automatic shut off when empty. -- Capacity in pounds/hour. &#9679 Aluminum: 1,200 Lbs. &#9679 Aluminum: Flat 2,000 Lbs; Ferrous: 2,500 Lbs. -- Biscuit description; typical size: 11" x 13" x 9". -- Motor: 20 HP.

ENTERPRISE - 1616 2-RAM: Horizontal Baler -- 300 HP. -- Overall length: 34'-7" x Width 17'-3". -- Charging chamber: 28" D x 60" W x 110" L. -- Approx. bale size: 31" x 45" x 62".

EXCEL - 2R10 2: Ram Baler with Steel Belt Infeed Specifications -- New in 2001. -- Motor: 2 - 50 HP. -- Main Cylinder: 10"; - Recently rebuilt. -- Bale Weight (OCC): Up to 1,500 Lbs. -- Cycle Time: 16 Seconds. -- Bale Size: 60"; x 45"; x 30";. -- Feed Opening: 40"; x 90";. -- Comes with spare eject & main cylinder (needs rebuilding). -- Includes: 72"; Wide MAYFRAN steel belt Infeed Conveyor with 15’ lower horizontal.

GREENMAX - EPS-AC-100, ...Cold Press DensifierSpecifications: -- EPS Polystyrene Foam Densifier -- Ratio: 50 to 1 -- Volume: 220 Lbs/Hr -- No Conveyor -- Loaded ont your Truck

HARMONY - S60-XDRC: Vertical BalerSpecifications: -- Motor: 20 HP. -- Bale Size: 30";x 60"; ≤ 48";. -- Bale Weight (OCC): Up to 1,000 Lbs. -- Feed Opening: 25″ x 60″. -- Ram Force: 92,360 Lbs. -- Volume: X-Large 7" cylinder. -- Loaded onto your Truck!

GPI/HARMONY - T60XDRC: Vertical BalerPer Manufacturer's Literature:Bale Size: 30";x 60"; ≤ 48";.Bale Weight (OCC): ≤ 1,500 Lbs.Feed Opening: 25″ x 60″.Ram Force: 235,620 Lbs.Volume: X-Large.T60XDRC. Automatic Baler: Textile, clothing Baler & more!Manually loaded recyclable materials: Corrugated cardboard & magazine/newsprint.Conveyor fed recyclable materials: PET & Tetra Pak containers; HDPE; aluminum cans; steel cans; polystyrene; clothing; milk jugs; refuse garbage; extruded aluminum/aluminum siding.Ideal for: Recycling centers; transfer stations; manufacturing facilities; municipalities; other industrial or commercial applications!Features of the "T60XDRC" Automatic Baler 48"; Rear hopper & conveyor system. "Beefy" Conveyor cleats: 38% Thicker than a standard cleat. Large 10" cylinder with: Twin torque tubes. Durable 6" rod. Efficient 30-second cycle time (no load). 146 PSI On the ram face. 20 HP Motor. Heavy-Duty piston pump. Large 100-gallon oil reservoir. Computer engineered frame to withstand force. NEMA 12 Enclosures & UL listed electrical controls. Standard retractable bale dogs. Dual hydraulic Bale ejectors. Oil cooler standard. (8) Slots to band or tie off the Bale. Automatic bale height shutoff with indicator light. Available with: In-ground or above-ground configuration. Meets or exceeds: OSHA or ANSI Z245.5 Safety Standards. Made in the USA.Benefits of the "T60XDRC" Automatic BalerMakes 1,500 Lbs Bale of OCC in just (45) minutes!Makes dense mill-sized Bales ideal for shipping & recycling.Eliminates the need for costly material preconditioning.Ultra dense Bales reducing shipping & handling costs.Large front loading feeding door for bulky materials.Saves space over costly horizontal balers; needs 105 sq. ft.Continuous feeding until Bale needs to be tied.Bales a large variety of materials.Loaded with: Extra features not found in competitive Balers.Designed for years of reliable, trouble-free service.Saves labor & preparation time, making your operation more profitable.The market value of the Bales produced by the SYSTEM TEN SIXTY are high since they can be shipped to the end user without additional processing, Shipping costs are reduced because maximum truck loads can be achieved. Material handling, labor, and storage costs are minimized.

WOLVERINE Two Ram Auto Tie Baler with Infeed Conveyor --Cylinder replaced in 2018 --BALE SIZE Width 46"Height: 31"Length: 61" --BALE VOLUME cu.ft. 50 --CAPACITY cu ft./hour 10,975 --CHARGE BOX OPENING inches 41" x 60" --HOPPER OPENING inches 40-3/8" x 60" --MAIN PUMP 60 GPM --SYSTEM PRESSURE PSI 3500 --MAIN RAM FACE PRESSURE PSI 145 --EJECTOR RAM FACE PRESSURE PSI 84 --SHIPPING WEIGHT 20 TonsBALING MATERIALBulk OCCSolid WasteNewsprintWhole Aluminum CansSteel CansPlasticNon-FerrousHDPE

HARRIS/SELCO - HLO-60AREB: Horizontal Auto-Tie Baler -- Motor: 2 – 100 HP. -- Cylinder: Rebuilt 12″. -- Hopper: 80″ Long. -- Hours of Operation: 14,000. -- Tons Per Hour/OCC: Up to 26 Tons. -- Includes 72″ MAYFRAN Steel Belt Feed Conveyor.