Dry Kilns For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 3
41 Results Found
Sort By 
STANDARD LISTINGS
$ 140,000

MLS Number 10812980 1994 American Wood Dryers Dry Kiln 2 chamber package type dry kiln. Boiler room between the two chambers Very good condition. Requires low pressure steam (15 psi). 5 VFD controlled fans. Includes controls and boiler Capacity approximately 100,000 board feet of 4/4. Each chamber and boiler room is 36'Lx20'Hx32'D Dismantling cost responsibility of buyer

Mike Stuck
828-773-2204
Call

$

Baker Furnace Inc Kiln 110V 3 Phase

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 23,000

Baker Furnace (grey) #20370 - Dry Kiln - Model number unknown - SN: 296 - 14,000 CFM - 1,200,000 BTU propane - 208V 3PH - Excellent condition Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

$ 23,000

Baker Furnace (Cream) 6716GPC - Dry Kilns (cream) - Conventional Heating System - SN: P140104 - Model: 6716GPC - 600,000 BTU Propane - Single phase 120V control voltage - 3 phase 208V motor voltage - Open volume: 672 cubic feet - Max operating temperature 500F - Owners Manual included - Excellent condition Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

$

Big on Dry Thermal Modification Kiln Optional Single or Double Units available! The photos on this listing show the latest kiln installed in the US. The wood treated was 12" wide pine at 190 degrees C. Contact CMS for more details! - Gas boiler system (optional oil or electric) - Quick, efficient installation provided by technicians! - Complete package includes shipping, installation and all drawings fro site preparation. - Approx 10,000-12,000 board foot capacity (depending on lumber size and bundle stacking) on the Double Kiln. - Customer support via internet connection.

Carolina Machinery Sales, Inc
704-288-1904
Call

$

Carolina Machinery Sales (CMS) is proud to offer Thermo-Modification Technology from the Italian manufacturer Big on Dry. ????Big on Dry has improved the Thermo-Modification process with their THERMOWOOD (THW) line and provides complete "turn key" systems. The PLC control systems allow programming for a wide variety off wood applications. This allows the same systems to work with very delicate wood that is hard to treat to thicker wood that will be used for outdoor products. The THW system can also be used as a conventional kiln with steam. Basic systems include: - Kiln completely built with stainless steel and aluminum - Initial humidy of 10-15% is reduced to 5-6% - Loading options: Side or Trolley - Heating options: Gas or Wood Burner - Humidification: Combined Spraying System - Controls: Fully Automatic Controls with PLC - Interface & Software: Allows communication with Big on Dry technicians to provide online support - Complete installation and training in the USA Contact CMS to get a quote for your Thermal Modification system

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Call for Price

ncludes Future-Design Controls FDC-2010-K5C | Small Kiln Features • Board Feet Capacity: 2,000 to 10,000 BF (Board Feet) • Expect a 6-9 Week Turn Around • Easy to Clean and Maintain • Built with Aluminum and Stainless Steel, The Same Aluminum that is food grade used in Commercial Kitchens • RH control results in less lumber damage, this leaves you with better, brighter colors • Hybrid Systems Available Using Direct Heat and Gas • These Kilns are Built for Forklifts • Pallet Stock Drying

Pallet Machinery Group
540-644-9220
Call

$

BolDesign Kiln that includes Future-Design Controls FDC-2010-K5C Small Kiln Features • Board Feet Capacity: 2,000 to 10,000 BF (Board Feet) • Expect a 6-9 Week Turn Around • Easy to Clean and Maintain • Built with Aluminum and Stainless Steel, The Same Aluminum that is food grade used in Commercial Kitchens • RH control results in less lumber damage, this leaves you with better, brighter colors These Kilns are Built for Forklifts • Pallet Stock Drying Kiln; Disassembled crated and ready to load. 1 truck

Carolina Machinery Sales, Inc
704-288-1904
Call

$

Coe 47' x 26' Package type dry Kiln with Controls, 1989 Hurst gas boiler 150 PSI, 6900# Steam Per Hour S/N 51000-750-3, Condensate Tank & Pumps & Electrical. can Buy as a Package or Seperate the Hurst Boiler.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$

iDry Standard Dry Kiln - (2) Available 2,000 BF Capacity

Carolina Machinery Sales, Inc
704-288-1904
Call

$

iDry Plus Dry Kiln Excellent Condition Electric

Carolina Machinery Sales, Inc
704-288-1904
Call

$

iDry Kiln NEW Condition.

 Lafayette, AL
Abneyco Equipment LLC
706-590-3624
Call

$

NEW Kiln Direct

 Lafayette, AL
Abneyco Equipment LLC
706-590-3624
Call

$

Kiln Direct Dry Kiln-MAKE OFFER-Need it gone!

 Lafayette, AL
Abneyco Equipment LLC
706-590-3624
Call

$ 125,000

2020 Kiln-Direct firewood kilns, (32) ¾ cord basket’s per unit, 2 available, $125,000 ea.

 Cohoes, NY
518-410-4486
Call

$

Front Load Dry Kiln with Hawa Controls as pictured gas fired inside dimensions:120” x 60” x 115” high

Carolina Machinery Sales, Inc
704-288-1904
Call

$

New Kiln-Direct

 Lafayette, AL
Abneyco Equipment LLC
706-590-3624
Call

Call for Price

2014 Kiln-Direct Kiln and Heat Treater 12' x 28' Propane on Concrete Slab. 9000 bd ft model: SLK 271109 s/n: 0090

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 47,500

NOVA TTF-6200 Dry Kiln System; Unassembled Front Load Kiln with high horsepower Heat & Exhaust. -- Specifications: Interior Dimensions: H 10' 3,5" (3.14 m), D 7'2"(2.19 m), W 25' 3" (7.7 m). -- Loading Door Opening: H 9' 10" (2.85 m), W 25' 3" (7.7 m). 1/8 " Aluminum sidewall bumpers, side hinged doors, exterior installation. -- Average 4/4 capacity: 5,100 bd. ft (12 m3) with 3/8" (9 mm) stickers. -- Average 8/4 capacity: 6,120 bd. ft (14 m³) with 3/8" (9 mm) stickers. -- Price shown is for kiln only. -- High horsepower heat requirement: 128 k BTU/hour. -- Heated Floor System, manuals and blueprints. -- Electrical Requirements: 230 VAC, 1 Phase, 60 Cycle, 25 kw/Hr max. -- Options: Replacement parts kit for a kiln, gas furnace and wood-waste furnace; Propane or Natural gas furnace providing 128k BTU/hour output; Plumbing for gas furnace, or Manual feed wood-waste furnace.

Bob Bullin
800-374-5009 ext:346
Call

$ 85,500

(2) Unassembled front load Kilns only System with high HP heat and exhaust designed to hold 8,461 bd/ft (20 cub.m) of 3/4" (25 mm) lumber and 10,475 bd/ft (25 cub.m) of 8/4" (50 mm) lumber (35 cbm). -- Kilns internal dimension: Height 12'3-1/2" (3.75 m), Depth 16' (4.88 m), Width 21' (6.4 m). -- Loading door opening of 10' (3.05 m) x 21' (6.4 m); 1/8" aluminum side wall bumpers, side hinged doors, exterior installation. -- High HP will service the heat requirements up to 245k BTU/Hr. -- Electrical requirement of 230 VAC, 3-Phase, 60 Cy; 7.21 kW/Hr. -- System includes: Timber Dry management automated Dry Kiln Controls for each kiln, touch-screen operator interface, data recording, optional remote access, and networking capability, Replacement part kit for a kiln. Manuals & Blueprints -- Options: Replacement parts kit for a kiln, gas furnace and wood-waste furnace; Propane or Natural gas furnace providing 245k BTU/Hr output; Plumbing for gas furnace, or Manual feed wood-waste furnace.

Bob Bullin
800-374-5009 ext:346
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved