Radial Arm Saws For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
31 Results Found
Sort By 
STANDARD LISTINGS
$ 5,050

CAM-WOOD RS-640X Radial Arm Saw Sturdy cast iron frame for saw head and arm.Specifications: -- 4 HP motor; 4-1/8" cutting depth with 14" dia. blade; 43" max. trimming width x 24" max. crosscut. Equipped with: -- Laser Light, magnetic starter, and overload protection. -- Positive locking device for tilting. -- Saw head that glides on ball-bearings against a hardened steel surface; spring-loaded saw head return. -- Large 44" x 33-3/4" wooden table. -- Heavy gauge steel base and legs for solid support. Features: -- 0° - 180° Saw head rotation (horizontal); 0 - 90° head tilting (vertical), with positive locks on a rotating head. Includes: -- Upper & lower blade guards and anti-kickback attachment.

Jim Reedy
800-374-5009 ext:455
Call

$ 6,050

CAM-WOOD RS-660X Radial Arm SawSturdy cast iron frame for saw head and arm.Specifications: -- 4 HP Motor; 4-1/8" cutting depth with 16" dia. blade; 45" max. trimming width x 35" max. crosscut. -- Large 32" x 45" wooden table. -- Magnetic starter and overload protection. -- 0° - 180° Saw head rotation with positive locks on rotating head. Features & Equipped with: -- Saw head that glides on ball-bearings against a hardened steel surface. -- Heavy gauge steel base & legs for solid support. -- Positive locking device for tilting. -- Motor brake, upper & lower blade guards, and anti-kickback attachment. -- Dado Option: Dado capacity 1" wide, 10" blade, 1" bore......... please inquire for extra cost.

Jim Reedy
800-374-5009 ext:455
Call

$ 4,250

CAM-WOOD RS-612X Radial Arm Saw Sturdy cast iron frame for saw head and arm.Specifications: -- 2 HP Single-phase motor; 3-1/8" cutting depth with 10-12" dia. blade; 27" max. trimming width x 16-1/2" max. crosscut; 1" dia. spindle. Equipped with: -- Magnetic starter, and overload protection. -- Positive locking device for tilting. -- Saw head that glides on ball-bearings against a hardened steel surface; spring-loaded saw head return. -- 25-1/2" x 31-1/2" wooden table. -- Heavy gauge steel base and legs for solid support. Features: -- 0° - 180° Saw head rotation (horizontal); 0 - 90° head tilting (vertical), with positive locks on a rotating head. Includes: -- Upper & lower blade guards and anti-kickback attachment.

Jim Reedy
800-374-5009 ext:455
Call

$ 850

Delta radial arm saw, 12". 3 phase with electric brake.

Sawmill Exchange
713-729-6455
Call

$ 3,500

Good running DeWalt Radial arm saw. Came out of pallet mill operation running. Table and slides solid. Ready to go to be a cut off or slasher saw.

Sawmill Exchange
713-729-6455
Call

$ 2,100

Vintage Dewalt GE Radial Arm Saw - Serial 10718 - A classic piece from 1952-1953 - Equipped with a robust 5hp/3PH, 220/240v, 14/7 amp motor - It's a true workhorse for woodworking shops. While it's seen some years, it's still functional - It features a 1" arbor, a dado capacity of 2", can do a 4" depth of cut at 90 degrees, crosscut 18", and rip 32"! - There is some minor surface rust in places, and the power switch requires rewiring, but with a little TLC, this saw can be a valuable addition to your workshop. - Also includes pneumatic corner clamps for locking your workpiece down - Don't miss the chance to own a piece of production woodworking history!

 Washington, Di
Sawmill Exchange
713-729-6455
Call

$ 6,350

DEWALT GA 16" Radial Arm Saw Specifications: -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90°, 19" crosscut cap., cutting 1" board with long arm. -- Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. -- Optional: -- Electric brake. -- Photo not of actual machine.

Jim Reedy
800-374-5009 ext:455
Call

$ 3,250

DEWALT 3526 Radial Arm SawSpecifications: -- 5 HP Motor; 16" dia. blade capacity; 1" dia. saw arbor. -- 24" Max. crosscut on 1" thick material; 4-1/2" max. depth of cut. -- Dado cap.: With 14" glade guard will take a 10" x 1-7/8" dado set, 10" x 1-1/4" with 16" guard; ready for your custom table to be mounted. -- Complete with: -- Blade guard and starter.

Jim Reedy
800-374-5009 ext:455
Call

$ 10,900

DEWALT 35 Series Super Duty 22" Radial Arm SawSpecifications: -- 7.5 HP TEFC Saw motor; 22" dia. blade; 52" long arm; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90°; 26" crosscut cap.; 40" rip cap. -- Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. -- Optional Electric brake.

Jim Reedy
800-374-5009 ext:455
Call

$ 2,950

DEWALT GE Radial Arm Saw Specifications: -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90°, 19" crosscut cap., cutting 1" board with long arm. -- Complete with: -- Blade guard, magnetic starter, metal stand, table clamps. -- Specifications subject to verification.

Jim Reedy
800-374-5009 ext:455
Call

$ 950

DEWALT 10" Radial Arm Saw --Specifications: -- Blade diameter 10", Table size 27" x 30" x 36" H.

Jim Reedy
800-374-5009 ext:455
Call

$ 1,250

DEWALT GA (563A) RADIAL ARM SAW: -- 14" Blade cap., 1" arbor, 3 HP - 3,425 RPM motor, 16" cutoff cap., 4" depth of cut. -- 20" x 50" table; hand crank raise & lower.. - Complete with: Blade guard, 4" dia. dust outlet and starter.

Jim Reedy
800-374-5009 ext:455
Call

$

OMGA Radial Arm Saw

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 7,950

(2) OMGA RADIAL 900-7 FM Radial Arm SawsSpecifications: -- Max. crosscut cap: 27-1/2" wide x 5-3/4" deep (at 90°); 7 HP - 3,200 RPM motor, 16" saw blade cap. with a 30 mm x 70 mm saw arbor (see photo); the saw heads swivel & tilt both in the horizontal & vertical axis consistent with a standard compound miter saw. -- Saw heads can also be turned 90 degrees to the crosscut and cut parallel to the length of table utilizing as a rip saw. -- Table size is 35-1/2" x 144"; max. height adjustment from center of arbor to the top of table is 13-3/4; the max. adjustment between blades is 100-3/4". -- Equipped with: -- Auto feed selection for either single or double after simply locking or unlocking heads from the feed and utilizing the foot pedal for cycling; also has totally enclosed upper blade guards, missing gravity-type lower blade guards, 8-bearing saw carriages, automatic head return, self-braking motors with electromagnetic brakes (stops blade within 2 Sec. approx.), magnetic controls, and control panel. -- The added 7" mini-Safe light curtain, if broken returns the saws to their home position if they are lock in for auto feed.This saw comes with three used 1-1/2" wide dado sets, dado overhead guards, 2 pneumatic hold down clamps and 1 wide push clamp.

Jim Reedy
800-374-5009 ext:455
Call

$ 4,950

OMGA 900/7 FM RADIAL ARM SAW Specifications: -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90°; 24-15/16" @ 45°; 5-7/8" max. thickness cap. at 90°, 4-3/16" at 45°; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed.Features: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages that travel on (8) bearings with dust scrapers for smooth travel & extended track life; -- 180° Swivel of entire saw carriage for mitered crosscuts; 45° saw head tilt for compound miter cuts.Complete with: -- Spring loaded return for safe return of saw head after completion of the cut; -- Oversized replaceable wooden tabletop with full length back fence; fabricated open steel base; -- Electro-magnetic brake to stop the blade within (2) seconds.Includes: -- Magnetic controls, push button controls & thermal overload switch.

Jim Reedy
800-374-5009 ext:455
Call

$ 2,250

OMGA RN 450 Radial Arm SawSpecifications: 3 HP Saw motor; 12" blade; 17-3/4" crosscut cap.; 26-3/4" rip cap.; 3-1/2" @ 90° thickness cap., 2-1/2" at 45°; 1-1/2" dado cap.; solid saw carriage with replaceable tempered steel sliding tracks. -- Equipped with: -- Carriage that travels on (8) bearings with dust scrapers for smooth travel & extended track life.180° Swivel of entire saw carriage for making mitered crosscuts; 45° saw head tilt for compound miter cuts; spring-loaded return for safe return of saw head after completion of the cut. -- Complete with: -- Oversized replaceable wooden table top with full length back fence; fabricated open steel base; electro-magnetic brake to stop the blade within (2) seconds. -- Includes: -- Magnetic controls, push button controls & thermal overload switch.

Jim Reedy
800-374-5009 ext:455
Call

$ 16,555

OMGA RADIAL ARM SAW 900-7 -- Specifications: -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90°; 24-15/16" @ 45°; 5-7/8" max. thickness cap. at 90°, 4-3/16" at 45°; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed. -- Features: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages that travel on (8) bearings with dust scrapers for smooth travel & extended track life; 180° swivel of entire saw carriage for mitered crosscuts; 45° saw head tilt for compound miter cuts. -- Complete with: -- Spring loaded return for safe return of saw head after completion of the cut; oversized replaceable wooden tabletop with full length back fence; fabricated open steel base; electro-magnetic brake to stop the blade within (2) seconds. -- Includes: -- Magnetic controls, push button controls & thermal overload switch. -- Options: Blade, Dado head guard, Dust collection system, & roller tables for infeed & outfeed.

Jim Reedy
800-374-5009 ext:455
Call

$ 8,491

OMGA RADIAL ARM SAW MODEL 900 Series RN Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180° Swivel of entire saw carriage for making mitered crosscuts. -- 45° Saw head tilt for compound miter cuts. -- Spring loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden tabletop with full length back fence. -- Fabricated open steel base. -- Electromagnetic brake to stop the blade within (2) Sec. -- Magnetic controls, push button controls & thermal overload switch. -- Options: Single-phase motor, Blade, Dado head guard, Dust collection system, and Roller tables for infeed & outfeed.

Jim Reedy
800-374-5009 ext:455
Call

$ 8,157

OMGA RN-700 RADIAL ARM SAW Specifications & features: -- 5 HP, 27-1/2" Crosscut cap. @ 90°; 19-7/16" @ 45°. -- Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- Self-centering locking in the positions of the main angles in (3) places, the saw arm (1), the motor & blade assembly swivel (2), and the motor carriage tilt (3); additionally manual locking at all intermediate angles. -- Easy and extremely practical unlocking of the arm for left/right swing on the front of the beam. -- Swiveling of the saw blade assembly and tilting of the blade on the vertical and horizontal axes. -- Standard overload protection with no-volt coil and motor brake. -- Spring-loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden tabletop with a full-length back fence. -- Fabricated open steel base. -- Magnetic controls, push-button controls & thermal overload switch. -- Options: Single-phase motors, Blade, Dado head guard, Dust collection system, & Roller tables for infeed & outfeed.

Jim Reedy
800-374-5009 ext:455
Call

$ 11,185

OMGA RADIAL 600 P3S Radial Arm Saw - 24" Crosscut Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180° Swivel of entire saw carriage for mitered crosscuts. -- 45° Saw head tilt for compound miter cuts. -- Spring loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden tabletop with full length back fence. -- Fabricated open steel base. -- Electromagnetic brake to stop the blade within (2) Seconds. -- Magnetic controls, push button controls & thermal overload switch. -- Options: Single-phase motor, Blade, Dado head guard, Dust collection system, and Roller tables for infeed & outfeed.

Jim Reedy
800-374-5009 ext:455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved