Edgebanders For Sale

IMA - NOVIMAT COMPACT I/G80/700/L12, ...EDGEBANDER (w/PREMILL & CORNER ROUNDING) + EVA / PUR Glue System -- Basic Specifications:Edgebanding capacity: 0.3 - 3 mm (0.012 - 0.118") for coil stock & up to 12 mm (0.47) thickness solid wood strips; panel thickness min./max. 8 - 60 mm (0.315 - 2.362").Equipped with: -- Spraying Unit: Anti-sticking solvent, Top & Bottom application. -- Infeed Fence with: NC Servo motor positioning. -- Premilling Unit with: (2) 4.5 kW (6 HP) Vertical joining spindles, NC controlled; both w/jump movement and reversible rotation; SIKO digital readouts, particle & debris air jet blower. -- Edge Preheating Lamps for best possible glue bond. -- Glue System: EVA/PUR Glue (Hot Melt) + (1) Quick Melt unit. -- Side Pressure Section: NC Controlled with: (5) Pressure rollers w/individual pneumatic pressure control for each roll. -- Edge Magazine: Vertical coil cartridge assembly, (1 x 6) positions with auto edge selection and HD guillotine.Workstations:End Trimming Unit: High speed 0.66 kW x 2 (0.88 HP x 2) double motor suspended from the holddown beam; automatic 0° - 15° chamfer adjustment for speeds up to 32 MPM (105 FPM). -- Flush/Bevel/Radius Trimming Unit: Top & Bottom, multi-profile, N.C. controlled, 1.5 kW x 2 (HP 2.0 x 2) - 12,000 RPM motors, bevels 0° - 30°, vertical & horizontal tracing wheels, digital readouts. -- Corner Rounding Unit: High Speed, (1) kW 0.66 (HP 0.88) - 12,000 RPM motor with multi-profile and NC Servo positioning. -- Profile Edge Scraping Unit: Top & Bottom, multi-profile 4-position NC controlled scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing wheels; digital readouts for adjustments, chip extraction system for scraping unit. -- Glue Scraping Unit: Flat, top & bottom self-tracing glue scraper, NC controlled. -- Buffing Unit: Double Stage, (2) Top & (2) Bottom 0.18 kW x 4 (HP 0.25 x 4) - 3,000 RPM ea. motor for linear & vertical corner edge polishing. -- Glue Scraping Unit: Flat, Top & Bottom self-tracing glue scraper. -- Buffing Unit: Top/Bottom 0.18 kW x 2 (0.25 HP x 2) - 3,000 RPM ea. motor.Machine Control:ICOS OPEN: Large color LCD display; displays stored data, on/off workstation sequence, troubleshooting diagnostic; data input by alphanumeric keyboard. Microprocessor adjusts according to stored programs or input; pressure section position & pressure control, vertical positioning of all holddown beam mounted workstations.Complete with:Heavy-Duty "Sliding" Feed Chain with: 80 mm Wide x 60 mm long rubber pad inserts, central lubrication of transport chain. -- Variable Feed Speed: 6 - 30 MPM (20 - 98 FPM). -- Motorized central height adjustment of top pressure beam with double V-belt holddown. -- Frequency inverters; ball bearing guided outboard panel support up to 27-1/2"; sound enclosure, all stations; all trimming & milling motors DC electrical motor brakes for immediate stopping. -- Spraying Unit with: Polishing solvent prior to Buffing Station. -- Actu

IMA - ADVANTAGE 500 L, ...EDGEBANDER (w/PREMILL & CORNER ROUNDING) -- Specifications:Edgebanding capacity: Coiled material: 0.3 - 3 mm (0.012 - 0.118"); strips 3.0 - 12.0 mm (0.118 - 0.472); panel thickness min./max. 8 - 60 mm (0.315 - 2.362").Equipped with:Premilling Unit: 4 kW x 2 (5.3 HP x 2) - 9,000 RPM Vertical joining spindles; SIKO digital readouts, and particle & debris air jet blower. -- Glue System - EVA (Hot Melt) with: "Quick-Lock" System. -- Pressure Section with: (1) Large dia. driven and (5) idle rollers. Workstations:End Trimming Unit: Dual motor, (2) 0.66 kW (0.88 HP) motors; suspended from the holddown beam; automatic chamfer adjustment 0° - 8°. -- Rough Trimming Unit: Top & Bottom flush trimming, W 1.0 kW x 2 (1.34 HP x 2) - 12,000 RPM Ea. motor; against the feed (up milling), vertical & horizontal tracing wheels, digital readouts for adjustments. -- Contour Unit: Multiuse; Top & Bottom linear and vertical corner trimming; total motors: (4) 2 x 180 W and 2 x 400 W - 12,000 RPM. -- Profile Scraper Unit: Profile Scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing shoes. -- Glue Scraping Unit: Flat, Top & Bottom self-tracing Glue Scraper. -- Buffing Unit: Top & Bottom 0.18 kW x 4 (0.25 HP x 4) - 1,400 RPM. -- Edge Smoothing Unit: Top & Bottom for 1, 2 & 3 mm edge.Control System ICOS OPEN TS: Large color LCD display; displays stored data, on/off workstation sequence, troubleshooting diagnostic; data input by touchscreen, alphanumeric keyboard, and mouse. Microprocessor adjusts according to stored programs or input; pressure section position & pressure control, vertical positioning of all holddown beam mounted workstations.Complete with:Heavy-Duty "sliding" feed chain with: 70 mm Wide x 60 mm long rubber pad inserts; central lubrication of transport chain; variable feed speed from 4 - 20 MPM (13 - 65 FPM). -- Motorized central height adjustment of top pressure beam with double V-belt holddown. -- Sound Enclosure - All stations; all trimming & milling motors DC electrical motor brakes for immediate stopping. -- Spraying Units: Upfront at infeed for anti-stick solvent and polishing solvent prior to Buffing Station. -- Actual Model is I M A ADVANTAGE 500 L

IMA NOVIMATCONCEPT/I/G80/440/L20 ... Edgebander w/Pre-milling & Corner Rounding -- General Specifications:Edgebanding capacity, 0.4 - 3 mm; (0.016 - 0.118") and solid wood strips up to 20 mm (0.787) thickness; Panel thickness min/max 10 - 60 mm (0.394 - 2.362") (min 10 - 40 mm (1.575") with contour trimming, max. 60 mm without contour trimming); Min Panel width 65 mm (2.559"), min panel length 150 mm (5.906"), edge length min. 250 mm (9.843") with material up to 3 mm; Feed speed 8 - 40 MPM (26.4 - 132 FPM).Equipped With: -- Indeed fence. Panel pre-heater (2) x 1,500 Watts. -- Pre-Milling Unit 08.0555 with KW 4.5 x 2 (HP 6 x 2) 9,000 RPM, vertical joining spindles, N.C. controlled, both w/jump movement and reversible rotation, SIKO digital readouts, particle & debris air jet blower. -- Spraying Unit, anti-sticking solvent (release agent), top bottom application. Between Pre-Mill and glue station. -- Coil magazine with HD guillotine, automatic coil changeover. Lot of vertical coil magazines. -- Glue System: EVA Glue (Hot Melt) Glue pot and Pre-melter with large capacity 30 Kg floor mounted hopper. -- Side Pressure Section: (1) driven and (5) idle rollers. N.C. controlled w/individual pneumatic pressure control for each rollWorkstations: -- End Trimming Unit: 08.42/30/B High speed, double motor 2 x KW 0.66 (HP 0.88) - 12,000 RPM. Horizontal model suspended from the hold-down beam, automatic chamfer adjustment 0° - 25° for speeds up to 32 MPM (105 FPM). -- Rough Trim: Unit 08.055. 1 KW (1.34 HP) - 12,000 RPM motors), Overlapped motor mounts, -- Multi-Function Unit (MFA) Radius and Chamfer milling Corner Rounding station Unit 08.348.. Controlled by N.C. with double automatic copying devices with 4+4 positions (total 8) for multiple edge thickness control, 0.66 kW (0.88 HP)- 12,000 RPM motors. -- Profile Edge Scraping Unit 08.519: Top & bottom, multi profile (4) positions N.C. controlled scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing wheels, digital readouts for adjustments, chip extraction system for scraping unit. -- Glue Scraping Unit 08521: Flat, top & bottom self-tracing glue scraper, N.C. controlled. -- Spray Nozzle top/bottom fir cleaning agent. -- Buffing Unit 08.617-2.: Top/bottom KW 0.18 (HP 0.25 x 2) - 1400 RPM ea. for buffing & polishing.Machine Control: -- ICOS comp[act with the following features: Display color screen, floppy disk reader, keyboard, adjustable hanging contol board. -- Sound-proof enclosure cabinet over all the working units with interior lights.

--Auction Listing, Seller Loading, Cleaned and Checked-- IMA ADVANTAGE 500 L Production Edgebander, with Pre-Mill & Corner Rounding Basic Specifications: -Edgebanding capacity: Coiled material 0.3 - 3 mm (0.012 - 0.118"); strips 3.0 - 12.0 mm (0.118 - 0.472); panel thickness min./max. 8 - 60 mm (0.315 - 2.362"). Equipped With: - Premill Unit - 08.379 with: 4 kW x 2 (5.3 HP x 2) 9,000 RPM Vertical joining spindles, SIKO digital readouts, particle & debris air jet blower. - Glue System - EVA (Hot Melt) with: "Quick-Lock" System. - Pressure Section with: (1) Large dia. driven and (5) idle rollers. Workstations: - End Trimming Unit - 08.415: Dual motor, 0.66 kW x 2 (0.88 HP x 2) suspended from the hold-down beam; automatic chamfer adjustment 0° - 8°. - Rough Trimming Unit - 08.055: Top & Bottom flush trimming, W 1.0 x 2 (HP 1.34 x 2) - 12,000 RPM ea. motor; against the feed (up-milling), vertical & horizontal tracing wheels, digital readouts for adjustments. - Contour Unit - CT U-L: Multiuse, Top & Bottom linear and vertical corner trimming; total motors: (4) 2 x 180 W and 2 x 400 W; 12,000 RPM. - Profile Scraper Unit - 08.519: Profile Scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing shoes. - Glue Scraping Unit - 08.521: Flat, Top & Bottom self-tracing Glue Scraper. - Buffing Unit - 08.617-2: Top & Bottom 0.18 kW x 4 (0.25 HP x 4) - 1,400 RPM. - Edge Smoothing Unit: Top & Bottom for 1, 2 & 3 mm edge. - Control System ICOS OPEN TS: Large color LCD display; displays stored data, on/off workstation sequence, troubleshooting diagnostic; data input by touchscreen, alphanumeric keyboard, and mouse. Microprocessor adjusts according to stored programs or input; pressure section position & pressure control, vertical positioning of all hold-down beam mounted workstations. Complete with: - Heavy-Duty "sliding" feed chain with: 70 mm Wide x 60 mm long rubber pad inserts; central lubrication of transport chain; variable feed speed from 4 - 20 MPM (13 - 65 FPM). - Motorized central height adjustment of top pressure beam with double V-belt hold-down. - Sound Enclosure - All stations; all trimming & milling motors DC electrical motor brakes for immediate stopping. - Spraying Units: Upfront at infeed for anti-stick solvent and polishing solvent prior to Buffing Station.

MA Hot Melt Glue Edgebander, Designed to allow operation by feeding parts past the glue head using the table and ball rollers, or the part can be vacuum mounted to the table (Vac Pump and Vac Pods included) with the head guided manually around the part with the weight of the applicator head counter-balanced from the boom. Specifications: Board Thickness 16mm to 45mm(0.630" - 1.77"), Strip Height 20mm-50mm (0.78"-1.97"), Strip Thickness 0.4mm to 3mm (0.016" - 0.118"), Glue Tank 0.8Liter (48 Cubic Inches, or 0.8 quart ), Processing Temperature 140 to 220 C Degrees ( 284F-428F). Current running 8 Amps, Glue Pot 1400 Watts, Max Overall Watts 2600. Weight of Movable head 20kg ( Note: this 45 lbs head weight is counter-balanced with spring.) Working height 960mm (37 3/4")

IMA Combiform I/R75/1260/V

Hot Air Edgebander for Preglued banding 0.4 - 1.5 mm thickness Automatic cutoff for up to 1/32" Coil feed with manual feed for strips Panel thickness 10-50mm Front and rear end trim Top/bottom trim

Laguna Bandt 4 Edgebander Machine is 6 months old Extremely low hours - Buyer upgraded to a larger machine!

Front/rear trim Top/bottom trim Top/bottom bevel Moulding Edgesanding

POLYMAC LATO 38 EDGEBANDER0.5 MM to 8 MM (5/16") Cap. edgebanding thickness, min. panel width 85 mm (with 150 mm panel length) or 50 mm (with 250 mm panel length) & min. length 140 mm, max. panel thickness 45 mm.Equipped with: -- Automatic strip & coil feed magazine with 3 mm PVC Guillotine (6" pack cap. for strips). -- Compact size, underneath infeed magazine mounted Teflon coated hot melt glue pot; Dual digital thermostats; 1" dia. glue applicator roller. -- Pressure section with (1) large dia. "non-stick" coated drive roller and (2) Pneumatic pressure controlled idle rollers, horizontal adjustment w/ digital indicator.Workstations: -- End Trimming: Front & Rear end trims (0.5 HP - 12,000 RPM motors), motors travel on 45° slides and tilt 0° - 12° on horiz. plane. -- Flush Trimming: Top & Bottom rough flush trims (0.73 HP - 12,000 RPM motors), motors tilt 0° - 30°. -- Fine Trimming: Top & Bottom "fine/bevel/profile" multi-function trimming (0.73 HP - 12,000 RPM motors), motors tilt 0° - 30°, Cutters for 10° bevel and 3 mm PVC radius round, digital readouts for easy setup (both T & B trimmes w/Quick Change motors for easy tooling change). -- Radius Scraping (PVC): Top & bottom scrapers for 3 mm thick PVC banding, model "RBD-501" w/pneumatic pressure control for scraping knives, digitals for horiz. adjustments. -- Buffing Station: Top & bottom buffing model "SP-500" (0.5 HP - 3,000 RPM motors), units tilt 0° - 30°. -- Speed, Feed: Feed chain with "anti-slip" 80 mm wide rubber pads, self-lubrication chain pads, feed speed 33 FPM, 2-HP feed drive.Complete with: -- Microprocessor control w/LCD readout; Insulated sound enclosure overall trim stations; extendable side panel support rail; 4 KVA - 240 Hz digital frequency inverter. -- Includes a complete set of used tooling & operating & spare parts manuals.

PUTSCH EBP 950PMCR EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge material thickness 0.4 - 3 mm coil & up to 5 mm strips.Min./max. panel thickness "all units" 8 - 50 mm (0.39" - 1.97"). Max. material thickness when using CR unit is 1.77" (45 mm). Min. panel width: 95 mm (3.7") & 110 mm (4.3") min. length.Fixed feed speed of 9 MPM (29.5 FPM).Equipped with: -- Automatic coil feed magazine with an oscillatory cutting shear for uninterrupted edge feed. -- Gluing Unit: Teflon coated glue tank, approx. 10-minute heat-up time. -- Side Pressure Unit: 3-roll pressure unit w/1st roller power driven via clutch with pneumatic in & out positioning, (2) idler rollers.Workstations: -- Pre-Milling Unit: (2) 2.0 HP (1.5 kW) motors with (2) opposing 60 mm diamond cutters that are micro-adjustable to mill up to 2 mm from the panel edge for optimal, chip-free glue application. -- End Trimming Unit:(1) 0.3 HP (0.2 kW) - 12,000 RPM Motor, automatic single motor end trim unit with (2) 80 mm blades. -- Top & Bottom Trimming Unit: (2) 0.5 HP (0.37 kW) - 12,000 RPM ea. Motor with 75 mm cutters (with disposable knives) that offer a straight 2 mm radius / 15° bevel.The flush trim unit also includes 120 mm scratch-resistant vertical disc copiers that are ideal for delicate finishes. -- Corner Rounding Unit: NOTE: When using CR unit, the max. material thickness is 1.77" (45 mm) & min. panel length is 7.78" (200 mm).(1) 0.3 HP (0.2 kW) - 12,000 RPM Single motor Corner Rounding unit for leading & trailing edges. The corner rounding unit is fixed to the frame crossbeam on double linear guides and features 50 mm cutter blocks, as well as vertical/horizontal 50 mm diameter copiers for profiling straight, curved, and beveled edges. -- Edge Scraping Unit: Top & Bottom PVC Scraper for up to 3 mm radius, complete with 3 mm scrape shaving collection box. Programmable, pneumatic exclusion on/off. -- Buffing Unit:Top & bottom buffing unit (2 x 0.2 HP - 1,400 RPM motor each), tilting range 8°.Controller: "ETOUCH" Touch Screen Control for the "EBP 950" Series; the ETOUCH touch screen control is a 7-inch color programmable display.Operators can store up to (99) working programs and connect to an optional network to read statistical data, diagnostic messages and online updates.The Control permits the operator to engage or disable specific work operations, while also providing immediate access to diagnostic messages and statistical data such as hours of operation and length of coil used.Complete with:Track Drive Chain feed speed 9 MPM (29.5 FPM).(2) Rows of upper pressure wheels in holddown beam.Adjustable material support outrigger.Sound & Safety Hoods.Used Tooling -- Actual Model is PUTSCH EBP 950PMCR.

CASADEI (PUTSCH-BRANDED) EBP-320 Compact Edgebander – New, Never Used!NOTE: If Buyer desires, our technicians can convert machine from 3-Phase to Single-Phase power for additional cost.Specifications: -- Edgebanding thickness 0.4 to 2 mm (0.02" - 0.08"). -- Max. coil dia. 600 mm (23.62"). -- Panel thickness 10 - 45 mm (0.39" - 1.77"), Min. panel width 110 mm (4.33"), Min. panel length 220 mm (8.66"). -- Feed speed 7 MPM (22 FPM).Equipped with: -- 3-Position Infeed fence, 0 mm, 1 mm, & 2 mm. -- 1 kg (2.2 Lbs.) Cap. Teflon-coated glue pot, (6) Heating elements, & Thermostatic glue control with Automatic standby & Temperature display. -- Pneumatic guillotine. -- Pressure section, (1) Silicone roll & (2) Nylon rolls. -- 0.8 HP Feed belt motor. -- PLC Control, with Backlit LCD display & Touchpad. -- Sound enclosure, Outrigger panel support.Workstations: -- Front & Rear End Trim Unit. -- Top & Bottom Flush Trim Unit, with (2) 0.37" kW (1/2 HP) - 10,300 RPM Motors, Straight or Bevel cutters, & 75 mm (2.95") Dia. Cutterheads with Knife inserts for 2 mm (0.08") Radius or 15° Bevel.Complete with: -- Instruction & Maintenance Manual.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-420 Compact Edgebander – New, Never Used!Specifications: -- Edgebanding thickness: 0.4 - 3 mm (0.02" - 0.12") Coil, 0.4 - 5 mm (0.02" - 0.20") Strip with Manual Feed. -- Max. coil dia. 800 mm (31.50"). -- Panel thickness 8 - 45 mm (0.31" - 1.77"), Min. panel width 95 mm (3.74"), Min. panel length 210 mm (8.27"). -- Feed speed 7 MPM (22 FPM).Equipped with: -- 1 kg (2.2 Lbs.) Cap. Teflon-coated glue pot, with (6) Heating elements, & Thermostatic glue control with Automatic standby & Temperature display. -- Pneumatically-operated guillotine. -- Pressure section. -- Feed chain pads, with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers. -- PLC Control, with Backlit LCD display & Touchpad. -- Safety enclosure.Workstations: -- Front & Rear End Trim Unit, with 0.18 kW (1/4 HP) - 10,080 RPM Motor. -- Top & Bottom Flush Trim Unit, with (2) 0.22 kW (0.3 HP) - 12,000 RPM - 200 Hz Motors, 75 mm (2.95") Dia. Cutterheads, & 2 - 3 mm (0.08" - .012") Radii. -- Top & Bottom Scraping Unit (Flush Trim Unit), with 120 mm (4.72") Vertical disc copier.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-420 Compact Edgebander – New, Never Used!Specifications: -- Edgebanding thickness: 0.4 - 3 mm (0.02" - 0.12") Coil, 0.4 - 5 mm (0.02" - 0.20") Strip with Manual Feed. -- Max. coil dia. 800 mm (31.50"). -- Panel thickness 8 - 45 mm (0.31" - 1.77"), Min. panel width 95 mm (3.74"), Min. panel length 210 mm (8.27"). -- Feed speed 7 MPM (22 FPM).Equipped with: -- 1 kg (2.2 Lbs.) Cap. Teflon-coated glue pot, with (6) Heating elements, & Thermostatic glue control with Automatic standby & Temperature display. -- Pneumatically-operated guillotine. -- Pressure section. -- Feed chain pads, with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers. -- PLC Control, with Backlit LCD display & Touchpad. -- Safety enclosure.Workstations: -- Front & Rear End Trim Unit, with 0.18 kW (1/4 HP) - 2,700 RPM Motor. -- Top & Bottom Flush Trim Unit, with (2) 0.22 kW (0.3 HP) - 12,000 RPM - 200 Hz Motors, 75 mm (2.95") Dia. Cutterheads, & 2 - 3 mm (0.08" - .012") Radii. -- Edge Scraping Unit, with Box. -- Top & Bottom Scraping Unit (Flush Trim Unit), with 120 mm (4.72") Vertical disc copier.Complete with: -- Use & Maintenance Manual.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP 420 PMVR Compact Edgebander – New, Never Used!Specifications: -- Edgebanding thickness: 0.4 - 3 mm (0.02" - 0.12") Coil, 0.4 - 5 mm (0.02" - 0.20") Strip with Manual Feed. -- Max. coil dia. 800 mm (31.50"). -- Panel thickness 8 - 45 mm (0.31" - 1.77"), Min. panel width 95 mm (3.74"), Min. panel length 210 mm (8.27"). -- Feed speed 7 MPM (22 FPM).Equipped with: -- Pre-mill unit, with (2) 0.75 kW (1 HP) - 12,000 RPM - 200 Hz Motors, Counter-rotation, Max. milling adjustment 2 mm (0.08"), & Dedicated extraction system with Blower. -- Anti-adherence spraying unit, with PLC-Controlled spray function, Lower & Upper Sprayer, and Liquid tank. -- 1 kg (2.2 Lbs.) Cap. Teflon-coated glue pot, with (6) Heating elements, & Thermostatic glue control with Automatic standby & Temperature display. -- Pneumatically-operated guillotine. -- Pressure section. -- Feed chain pads, with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers. -- PLC Control, with Backlit LCD display & Touchpad. -- Safety enclosure.Workstations: -- VR Front & Rear End Trim Unit, with 0.22 kW (0.3 HP) - 2,700 RPM Motor, Vertical rounding function, & (2) Processing modes: Straight (thin edges & wooden strips) & Radius (ABS & PVC thick edges). -- Top & Bottom Flush Trim Unit, with (2) 0.22 kW (0.3 HP) - 12,000 RPM - 200 Hz Motors, 75 mm (2.95") Dia. Cutterheads, & 2 - 3 mm (0.08" - .012") Radii. -- Edge Scraping Unit, with Box. -- Top & Bottom Scraping Unit (Flush Trim Unit), with 120 mm (4.72") Vertical disc copier. NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-320 Compact Edgebander – New, Never Used!Multiple Machines Available in 3-Phase or Single-PhaseSpecifications: -- Edgebanding thickness 0.4 to 2 mm (0.02" - 0.08"). -- Max. coil dia. 600 mm (23.62"). -- Panel thickness 10 - 45 mm (0.39" - 1.77"), Min. panel width 110 mm (4.33"), Min. panel length 220 mm (8.66"). -- Feed speed 7 MPM (22 FPM).Equipped with: -- 3-Position Infeed fence, 0 mm, 1 mm, & 2 mm. -- 1 kg (2.2 Lbs.) Cap. Teflon-coated glue pot, (6) Heating elements, & Thermostatic glue control with Automatic standby & Temperature display. -- Pneumatic guillotine. -- Pressure section, (1) Silicone roll & (2) Nylon rolls. -- 0.8 HP Feed belt motor. -- PLC Control, with Backlit LCD display & Touchpad. -- Sound enclosure, Outrigger panel support.Workstations: -- Front & Rear End Trim Unit. -- Top & Bottom Flush Trim Unit, with (2) 0.37" kW (1/2 HP) - 10,300 RPM Motors, Straight or Bevel cutters, & 75 mm (2.95") Dia. Cutterheads with Knife inserts for 2 mm (0.08") Radius or 15° Bevel.NOTE: Sold "As-Is" Without Warranty!