Woodworking Equipment For Sale

HOLZ-HER 1416 SPRINT EdgebanderMax. 1/2" (13 mm) solid wood banding & 3 mm PVC cap., 2-3/8" max. panel thickness and 5-1/2" min. panel length. Equipped with: -- Cartridge glue system w/cartridge hopper & "quick melt" feature "1906", automatic magazine for coil, strip & solid edgebanding (1901); HD guillotine for 3 mm PVC, glue applicator nozzle. -- Pressure section with (1) large dia. drive roller & (2) idle rollers, each w/individual pneumatic plunge & pressure control, powered 1st roller with electronic speed control synchronized with chain feed speed (1913).Workstations: -- Double motor end trim "1918" (0.5 HP - 18,000 RPM motor ea. 300 Cy HF motors), adjustable 0° - 10° for chamfer cuts electro-pneumatically. -- Top & bottom flush trim unit "1823" (0.8 HP - 300 Cy HF motors 18,000 RPM Motor ea.), SIKO digital readouts, tilts 0°- 15°. -- Top & bottom fine & radius trim unit "1942M" (0.8 HP - 300 Cy HF motors 18,000 RPM Motor ea.), bevels 0° - 15°, SIKO digital readouts. -- Top & bottom surface scraper "1964". Variable feed speed 8 - 20 MPM (26 - 67 FPM)Includes: Microprocessor for line control & glue temperature, 10 KVA frequency changer, outboard panel support, and sound enclosure w/interior lights over enclosed workstations of the machine. INCLUDES: Used tooling on all work stations.

HOLZ-HER 1417 EDGEBANDER WITH PRE-MILL & CORNRER ROUNDINGMax. 1/2" (13 mm) solid wood banding & 3 mm PVC cap., 2-3/8" max. panel thickness and 5-1/2" min. panel length.Equipped with: Cartridge glue system w/cartridge hopper & "quick melt" feature "1906", automatic magazine for coil, strip & solid edgebanding; HD guillotine for 3 mm PVC, glue applicator nozzle. -- Pressure section with (1) large dia. drive roller & (2) idle rollers, each w/individual pneumatic plunge & pressure control, powered 1st roller with electronic speed control synchronized with chain feed speed.Workstations: Double motor end trim "1918" (0.5 HP - 18,000 RPM motor ea. 300 Cy HF motors), adjustable 0ø - 10ø for chamfer cuts electro-pneumatically. -- Top & bottom flush trim unit "1823" (0.8 HP - 300 Cy HF motors 18,000 RPM Motor ea.), SIKO digital readouts, tilts 0ø - 15ø. -- Top & bottom fine & radius trim unit "1942M" (0.8 HP - 300 Cy HF motors 18,000 RPM Motor ea.), bevels 0ø - 15ø, SIKO digital readouts. "Single Station" corner rounding unit "1983" (0.5 HP - 18,000 RPM motor ea. 300 Cy HF motors). -- Top & bottom surface scraper "1964"; Top & bottom profile scrapers for thick PVC "1929"; -- Top & bottom jump buffing unit "1944-K" (0.25 HP - 2,600 RPM ea.), tilts 0ø - 5ø. -- Variable feed speed 8 - 20 MPM (26 - 67 FPM), panel overhang beyond chain 35 mm (1.38").Includes: Microprocessor for line control & glue temperature, 10 KVA frequency changer, outboard panel support, and sound enclosure w/interior lights over enclosed workstations of the machine.SELLER STATES: Everything powers up, top and bottom trimmer need to be mounted, extra trimmer motors, needs some airlines replaced , not original hotmelt unit had been replaced at one time

HOLZ-HER TANGENT CORNER ROUNDERLow cost unit for profiling, shaping, chamfering or rounding most common type & shape of corner/edge on an edgebanded panel. -- Capacity: 16 - 40 mm (1-1/2") Max. panel thickness, 80 x 200 mm min. panel size, max. edge thickness 1/4" (6 mm). Adjustable start/stop points for the cutter for different profile shapes, squaring fence for precise corner rounding. 0.5 kW - 25,000 RPM Motor. -- Complete with: Pneumatic clamping cylinder, pullout table extension for large panels, enlarged safety hood, and pneumatic operation with foot pedal control.

HOLZ-HER - EVOLUTION 7405: CNC Machining Center (Vertical) -- SpecificationsFlexible "Vertical" Machining Center can reach movement speeds of: 223 FPM (68 MPM) in "X" & "Y" axis; 49 FPM (15 MPM) in "Z" axis with total safety. -- Working CapacityMaximum part size for "X" axis: 126" (3,200 mm); "Y" axis: 36.2" (920 mm); max. part thickness: 2.8" (70 mm).Minimum part size for "X" axis: 7.8" (200 mm); "Y" axis: 2.76" (70 mm); min. part thickness of 0.31" (8 mm).Automatic infeed/outfeed from the LH or RH side."Patented" NC Controlled vacuum clamping system with: (1) 8 m³/Hr Vacuum Pump. -- Boring Unit(1) Boring block with: 3 HP (2.2 kW) - 4,000 RPM motor.(9) Vertical spindles with: (5) Spindles in "X" axis; (4) spindles in "Y" axis.(6) Horizontal spindles with: (2+2) in "X" axis; (1+1) horizontal spindle in "Y" axis.(1) 2-1/4 HP (1.7 kW) "X" Axis grooving saw; 5,000 RPM; max. 120 mm saw blade diameter. -- Machining(1) 9 HP (6.7 kW) Router with: HSK F63 Adaptor; variable speed from: 1,000 - 18,000 RPM.(1) 6-Position ATC rack mounted inside the working unit. -- Operator & Machine ControlPC Front End with: HOLZ-HER "CAMPUS" + "NC Hops"+ Windows "7" Operating System.19" TFT Monitor; international keyboard, soft touch keypad; industrial mouse.RS-232 Serial ports; USB ports; (1) CD ROM drive; Ethernet connection.Real-time multitask processing; programs can be transferred via diskette or downloading by wire is possible. -- Complete with:Pneumatic part clamping roller devices; auto lubrication system; handheld control pendant; sound enclosure; safety devices. -- Actual Model: HOLZ-HER EVOLUTION 7405

HOLZ-HER - EVOLUTION 7405: CNC Machining Center (Vertical) -- SpecificationsFlexible "Vertical" Machining Center can reach movement speeds of: 223 FPM (68 MPM) in "X" & "Y" axis; 49 FPM (15 MPM) in "Z" axis with total safety. -- Working CapacityMaximum part size for "X" axis: 126" (3,200 mm); "Y" axis: 36.2" (920 mm); max. part thickness: 2.8" (70 mm).Minimum part size for "X" axis: 7.8" (200 mm); "Y" axis: 2.76" (70 mm); min. part thickness of 0.31" (8 mm).Automatic infeed/outfeed from the LH or RH side."Patented" NC Controlled vacuum clamping system with: (1) 8 m³/Hr Vacuum Pump. -- Boring Unit(1) Boring block with: 3 HP (2.2 kW) - 4,000 RPM motor.(9) Vertical spindles with: (5) Spindles in "X" axis; (4) spindles in "Y" axis.(6) Horizontal spindles with: (2+2) in "X" axis; (1+1) horizontal spindle in "Y" axis.(1) 2-1/4 HP (1.7 kW) "X" Axis grooving saw; 5,000 RPM; max. 120 mm saw blade diameter. -- Machining(1) 9 HP (6.7 kW) Router with: HSK F63 Adaptor; variable speed from: 1,000 - 18,000 RPM.(1) 6-Position ATC rack mounted inside the working unit. -- Operator & Machine ControlPC Front End with: HOLZ-HER "CAMPUS" + "NC Hops"+ Windows "7" Operating System.19" TFT Monitor; international keyboard, soft touch keypad; industrial mouse.RS-232 Serial ports; USB ports; (1) CD ROM drive; Ethernet connection.Real-time multitask processing; programs can be transferred via diskette or downloading by wire is possible. -- Complete with:Pneumatic part clamping roller devices; auto lubrication system; handheld control pendant; sound enclosure; safety devices. -- Actual Model: HOLZ-HER EVOLUTION 7405

HOLZ-HER - 1516 Case Clamp (Single-Bay) -- Specifications1-Bay Clamp; 100" x 50" x 24" clamping cap.; (1) movable, vertically positioned clamping beam with: (3) Horizontal clamps; (4) adjustable vertical clamps. -- Total of (14) pressure cylinders with: 3-7/8" Stroke & (4) adjustable counter pressure bars; 700 Lbs/cylinder pressure at 100 PSI compressed air; built-in controls with pressure gauge.

Holzma HPL11 Rear Load Panel Saw Still under power. Ready to be removed the end of January 2024

Holzma OPT.HpPS81/38 Panel Saw

Holzma Saw Cutting length 3,200 mm (126"), 95 mm (3.7") cutting height, 18 HP (13.4 kW) main and 3 HP (2.2 kW) scoring motor. Variable saw carriage travel speed 0 - 229 FPM (0 - 70 MPM), constant return of 229 FPM ( 70 MPM). Equipped with: Electronically controlled overhead program fence, rack and pinion driven on both sides, forward speed 131 FPM (40 MPM), return speed 131 FPM (40 MPM), equipped with (6) clamps which open up to 4" (102 mm). The HOLZMA HPP-81 has a CADMATIC control, version 2.2, with (500) cutting dimension memory with color monitor, moving graphics and numeric display. CAD input, floppy disk drive and direct input by keyboard or RS-232 port for possible direct downloading from PC. Complete with: Combi-rollers rear machine table with profile rails at 50 mm centers, front with (3) air flotation tables 24" X 86" (609 x 2,184 mm) each. Includes: Cross cut fence, side pressure device for cross cutting on pressure beam.

HOLZMA HPP 380 31/31 FRONT LOAD AUTOMATIC PANEL SAWSpecifications: -- 122" (3,100 mm) Rip cutting capacity & pull back; 3.74" (95 mm) saw blade projection. -- 15 HP Variable speed main saw motor and 3 HP (2.2 kW) scoring motor; scoring saw adjustment via "CADMATIC 4.0" control. -- Saw Carriage: -- Variable saw carriage travel speed from 16 - 426 FPM (5 - 130 MPM), constant return of 426 FPM (130 MPM). -- Pusher Fence: -- Electronically controlled overhead program fence, equipped with (6) clamps that open up to 100 mm (3.9"). -- Rack & pinion driven on both sides, forward speed of 262 FPM (80 MPM), return speed of 262 FPM (80 MPM). -- Operator & Machine Control: -- HOLZMA Power Control with "CADMATIC 4.0" + "Windows XP" operating system; virtually unlimited cutting dimensions memory; TFT 17" Flat Screen monitor, REAL-TIME moving graphics; panel grooving & numeric display; Industrial keyboard, 1.44MB Floppy & DVD R/W drives, capable of online operation via RS 232 or USB port for possible link to an office PC. -- Complete with: -- Automatic "CENTRIC" side aligner with front & rear forks, holding ripped strips squarely against the right angle fence; (1) Front air flotation table, 86" x 25" (2,160 mm x 650 mm) & (2) front air flotation tables, 67" x 25" (1.700 mm x 650 mm); rear support rails with non-marking roller modules. -- Actual model is HOLZMA HPP 380 31/31.

HOLZMA HPP 250 38/38 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 149.6" (3,800 mm) Cutting length & pull-back; 2.95" (75 mm) saw blade projection; 18 HP (13.5 kW) - 4,700 RPM main saw motor, 350 mm main saw dia; 1.5 HP (1.1 kW) - 5,100 RPM scoring motors, 200 mm scoring saw dia.;NC controlled scoring saw adjustment from "CADMATIC" control. -- Saw carriage: Variable travel speed from 16 - 328 FPM (5 - 100 MPM), constant return of 328 FPM (100 MPM). -- Pusher Fence:Electronically controlled overhead program fence, rack & pinion driven on both sides; forward speed capacity 197 FPM (60 MPM);(5) Gripper clamps, 1st (3) clamps with (2) fingers & others with (1) finger; clamps open up to 3.2" (80 mm). -- Operator & Machine Control:PC Front-End with: HOLZMA "CADMATIC 4" Practive Controller+ Windows Operating System "designed for industrial environments"; virtually unlimited cutting dimensions memory;17" TFT Flat screen monitor, DVD ROM drive, RS-232 port, USB port, analog modem, online operation from an office PC is possible."Real-Time" Cutting sequences with 2-D moving graphics; high-tech error diagnostics with true photos & video clips for immediate identification of the source problem. -- Complete with:HOLZMA Patent: Automatic "CENTRIC" full cutting length side pressure device with front & rear forks holding ripped strips squarely against the right angle fence (reduces cycle time ...25% compared to conventional systems)."POWER-LOCK" quick-change saw blade system; (3) front air floatation tables 71" x 24" (1,800 x 600 mm). -- Options Include:Holzlink software with information handling package to print labels from CabinetWare, Label Printer,230 V Transformer & 10-sets main & scoring blade. (5 blade sets sharpened only one time). --Actual model is HOLZMA HPP 250/38/38 OPTIMAT.

HOLZMA HPP-11-32 OPTIMAT FRONT LOAD PANEL SAW:Specifications & features: 3,200 mm (126") Cutting length & pull-back behind the cutting line; 125 mm (4.9") saw blade projection; 30 HP (22.3 kW) main & 3 HP (2.2 kW) scoring motor. -- Variable saw carriage travel speed from 0 - 410 FPM (0 - 125 MPM), constant return of 410 FPM (125 MPM). -- Equipped with: Main blade 18" (450 mm) dia. and scoring blade 8" (200 mm dia.). -- Electronically controlled overhead pusher fence, rack & pinion drive on both sides by AC Servo motor; forward speed from 0 - 262 FPM (0 - 80 MPM), return speed of 262 FPM (80 MPM); equipped with (8) gripper clamps (open up to 4.7"). -- HOLZMA CADmatic Operating system; 15" color monitor (displays cutting dimensions); data input by keyboard or 1.44 MB floppy disk drive & downloading from office PC is possible. -- Control panel mounted on double swiveling arm for ergonomic positioning by the operator. -- Includes: Combi-rollers rear machine table with profile rails, rollers spaced at 50 mm centers; front with (3) air floatation tables, 85" x 26" (2,159 x 660 mm) each. -- Complete with: Angular square fence, automatic side aligner for crosscutting, (2) aligning devices on program fence; "Quick Saw Changing System" for main & scoring blade.

HOMAG KAL 310/7/A3/S2 EDGEBANDER (W/PRE-MILLING & CORNER ROUNDING)Working Capacity: -- Edgebanding thickness in rolls (min/max) 0.3 - 3 mm. -- Panels thickness (min/max) mm 12 - 60 (1/2" through 2-3/8"). -- Feed speed (adjustable) 18 - 25 MPM (59 to 82 FPM). Front-End Equipped: -- In-feed fence, manual digital positioning. -- Pre-Milling Unit (vertical joint trimmers) (2) x 3 Kw each. -- Lamps to pre-heat the work pieces edge. -- Edge Magazine, vertical coil cart with 2 positions. -- Gluing Unit QA 34, EVA (Hot Melt) -- Side Pressure Zone, (3) rollers, adjustable by N.C. servo motor. Working Units: -- End Trimming Unit HL 81 Motors, 2 x Kw 0.22 (0.50 HP) -- Pre-Rough Trimming Unit: Top/Bottom, 2 x 0.55 Kw. (0.75 HP) 12,000 RPM motors, none tilt with digital indicator positioning. -- Multi Function Unit FK 11: Profile Contour Trimming, 2 x 0.4 Kw, 12000 RPM motors, for linear top/bottom edge trimming and vertical front/back corner rounding. -- Profile Edge Scraping Unit:Pneumatic in/out and manual digital indicator positioning. -- Glue Scraper:Top/Bottom, flat panel surface glue scraper. -- Buffing Unit: Top/Bottom oscillating buffing motors 2 x 0.25 Kw (0.35 HP).Operator & Machine Control: -- HOMATIC NC 21 controller, flat color LCD screen with keyboard and mouse input. Complete With: -- Top pressure system with rubber belt. -- Panel Support Outrigger. -- Sound and safety hoods over all working stations. Actual Model is HOMAG KAL 310/7/A3/S2

HOMAG AMBITION 2274 (KAL 370/6/A3) EDGEBANDER (W/PRE-MILL): -- Specifications: Working Capacity: Coiled stock min/max Edge thickness 0.3 - 3 mm (0.011. - 0.118"), Strip material min/max Edge Thickness 0.4 - 1 mm (0.016 - 0.039"),Panel stock min/max thickness 8 - 60 mm (0.472" - 1.574"). Panel Over-Hang 30 mm (1.18").Minimum workpiece width: 2.36" (60 mm) with workpiece thickness ≤ 22 mm) & 4.13" (105 mm) with workpiece thickness > 22 mm). -- Cleaning Agent Spraying Units:Top/Bottom spraying device prior to workpiece pre-milling. Designed for applying a separating agent, for easier cleaning of any residual glue on the panel. -- In-Feed Fence: Pre-heated manually adjustable in-feed fence with digital indicators. -- Pre-Milling Station:(2) 2.2 HP (3.0 kW) - 150 Hz, 9,000 RPM vertical jointing spindle motors; equipped with panel blow-off device and SIKO digital counters for adjustments. -- Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application. -- Edge Magazine:A multi-purpose 2-coil magazine expands capability by running coiled material & strips. Maximum roll diameter: 400 mm & 830 mm.Magazine height adjustment allows for greater usage of varying panel heights by raising and lowering the magazine table, allowing the operator to center the panelon the edgebanding. -- Gluing System Homag Quickmelt: QA 3 - Quick Melt Overhead Unit & heated roller applicator digitally displayed thermostat for both upper and lower unit.34 mm Dia. Glue Roller allows for excellent control of temperature for optimum bonding results with individual adjustment for leading and trailing glue gatesLower melting unit equipped with automatic glue level control. Melting capacity: 12 kG/Hr (26 Lbs/Hr). Ultra-fast five-minute (5) heat-up time. -- Pressure Section: Programmable (Servo), automatic pressure zone adjustment, (1) large 150 mm dia. driven & (4) 70 mm dia. idle rollers, pneumatic pressure control depending on edgebanding material used.Workstations: -- End Trimming Unit:(2) 1 HP (0.8 kW) - 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer to straight snip. Programmable (Servo). -- Rough/Pre-Trimming Unit:(2) 0.55 kW 0.74 HP (0.55 kW) - 12,000 RPM Motors, tilting range +/- 1° & counter-rotating to machine feed to prevent blowout & .Height adjustment synchronized with the top pressure-beam .With digital counters. -- Scraping Unit:Top & bottom for thick PVC/ABS, electro-pneumatic positioning & pneumatically activated. Pneumatically-controlled blow off nozzles. Height adjustment synchronized with top pressure beam. -- Flat Glue Scraper Unit:Top & bottom to remove potential glue squeeze-out, electro-pneumatic positioning in and out of the processing area & electro-pneumatically activated height adjustment synchronized with top pressure beam. -- Buffing Unit:Top & bottom edge buffing/polishing. Operator & Machine Control: -- Power Touch Control Multi-Touch Screen C

HOMAG OPTIMAT KAL 210/7/A20/S2 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications:Working Capacity: Edge thickness cap.: 0.4 - 20 mm; min. panel width: 55 mm (2-1/4"); panel thickness: 12 - 60 mm; min. edge length: 7.8". -- Infeed Section:(2) Premilling heads, each with 3 kW - 6,000 RPM motor, (1) with jump control; chip blowoff unit after last head; SIKO digitals for horizontal & turret for vertical adjustments; -- Preheating infeed fence for panel edge. -- Automatic 2-coil feed magazine for coil material up to 3 mm thickness; strip feed magazine for up to 20 mm (3/4") solid wood banding. -- "QA 34 Quick Melt" Glue system per melt hopper feeder & roller applicator (reversible); pneumatic pressure roll section with (1) large dia. driven & (6) idle rollers. -- Workstations:Double motor front & rear end trim: 0.7 HP - 12,000 RPM Motor ea.; pneumatic chamfer setting. -- Top & bottom rough trims: 2 HP - 12,000 RPM motor ea. -- Top & bottom profile trim units: For leading & trailing edge, (4) 0.6 HP - 12,000 RPM motors; up to 4 mm edge thickness: All trim station motors are: 200 Cy - HF and equipped w/electronic brakes. -- Profile tracing from: Top, bottom and side for chamfering or rounding of pretrimmed PVC edges; pneumatically controlled blowing nozzles. -- Max. edge thickness: 3 mm (1/8"); panel thickness: 12 - 60 mm (15/32" to 2-3/8"); unit laterally adjustable by max. 50 mm (1-31/32"); Collection box for PVC shavings. -- Height adjustment with top pressure beam without tools; manually adjustable with digital mechanical counters. -- Profile Edge Scraping Unit with: Electropneumatic adjustment. -- Top & Bottom buffing unit. -- Feed & Holddown System:Motorized top pressure beam with powered V-belt holddown. -- 80 mm Wide Heavy-Duty feed chain w/rubber pads, automatic chain track lubrication system. -- 5 HP Feed drive for variable feed speed of 23 - 98 FPM. -- Operator & Machine Control:HOMATIC "PC 22", 2 GHz CPU with 512 MB RAM, USB port; functions in XP Windows environment. Keypad with TFT flat screen LCD display, onscreen fault diagnostic, part & lineal feet/meter tracking, etc. Diagnostic analysis from HOMAG via Modem fault diagnostic is possible. -- Complete with:SIKO Digital adjustments on: Top & Bottom trim, fine trim, and scraper stations; 10 KVA - 200 Cy frequency converter, electronic DC brakes on all trim motors. -- Sound cabins for all trim workstations; adjustable outboard panel support with floor supports. -- Actual Model is Optimat KAL 210/7/A20.S2.NOTE: Seller states that the Edgebander was in use until recently. The Corner Rounding stations are no longer in working condition

HOMAG - OPTIMAT KDF 440C: Special RH Feed Direction Edgebander w/Premilling, Corner Rounding & Return Conveyor (aka BRANDT - KDF 440C)Specifications: Premilling & Corner Rounding; HIGHFLEX Automated package. -- Edge & Workpiece Capacity: 0.4 - 8 mm (0.016 - 5/16") Edge; 8 - 60 mm (5/16 - 2-3/8") panel thickness; 160 mm (6-3/8") min. panel length; 70 mm (2-3/4") min. panel width.Equipped with: -- Premilling Station:(2) Motors @ 2.25 kW (3.0 HP) - 12.000 RPM; LH & RH rotation w/pneumatic jump control for chip free & clean panel edges. Equipped with diamond cutterheads -- Infeed Fence with: Servo motor positioning. -- Infrared Radiant Quartz Heating Unit between Glue roller and pressure section. -- Automatic Edge Magazine: Strip & coil stock; strips: 0.4 mm - 8 mm (0.016 - 5/16"); coils up to 3 mm PVC; "HD" guillotine "Quick Change" Glue Tank for maintenance & glue color change. -- Pressure Section: 1st Roller driven plus: (3) Idle rollers; timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover. -- Feed Speed: Variable 8 - 14 MPM (26 - 46 FPM); 11 MPM (36 FPM) when using contour trimming. -- BRANDT "Power Touch Control"; memory: 256 MB RAM; 1 GB flash card drive; Operator control panel: 22" Color HD widescreen; soft keypad; internal modem for remote diagnostic link.Workstations -- End Trimming:(2) Motor @ 0.35 kW (1/2 HP) - 12,000 RPM; automatic chamfer from control panel 0°- 15°. -- Flush/Bevel-Fine/Radius Trimming Unit:Top/Bottom (2) motors; 0.55 kW (3/4 HP) - 12,000 RPM; auto. tilt positioning; 0° - 25° with combination flush/radius/chamfer cutterheads; horizontal & vertical tracing wheels. Equipped with: Brushless multi-axis Servo motors for positioning of work unit & horizontal copy wheels for quick changeover. Includes: (3) Positioning options: Profile-1, Profile-2; flush trimming -- Corner Rounding Unit:(1) Motor: 0.35 kW (1/2 HP) - 12,000 RPM for leading & trailing edges vertical corner rounding of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness -- Scraping, multi-profile (PVC): Top/Bottom with (2) profiles. 1 mm & 2 mm or 3 mm instead of 2 mm; Servo control positioning of vertical & horizontal copy wheels. - PVC scrape collection box. -- Scraping Glue Unit:Flush Top/Bottom on panel surface with floating insert knives. -- Buffing Unit: Top/Bottom (2) motors; 0.10 kW (0.125 HP) - 2,800 RPM. -- RIEPE anti-adhesion and RIEPE detergent. -- Complete with:Motorized, programmable hold-down pressure beam; padded sound enclosure and used tooling. -- Options Include:Homag Return Conveyor as pictured. -- Actual Model: RH Feed HOMAG - OPTIMAT KDF 440C (aka BRANDT - KDF 440C, but branded HOMAG).

HOMAG ABD 050 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:(1) Horizontal drilling aggregate with (1) individual spindle; with servo control of the "X" Axis; (1) glue & dowel injector with glue flow control; (1) vibrating hopper dowel feeder. -- Working Capacity:Part size: Length 20 mm - 1,250 mm (.75" - 49") Width 20 mm - 800 mm (.75" - 31.5") Thickness 10 mm - 60 mm (.4" - 2.4") thick.Machine is set up for 8 mm Dia. x 30 or 35 mm long dowels -- Work Area(2) Separate working fields with (4) pneumatic top clamps can process up to (2) parts independently on the left-hand, right-hand or center stops; work pieces can be loaded in (1) field while being machined in the other to allow fast production of varying parts. -- Operator Interface:PC Front-end with Homag Power Control PC 85T, WoodWOP 5.0 operating system with graphic programming & error messaging.17" TFT flat screen monitor, CD-RW drive, 1.44 MB floppy drive, standard keyboard & mouse; Software allows program design with automatic mirror-image by use of an active center stop located 600 mm (23.6") from zero. -- Complete with:All manuals, documentation provided with machine. -- Actual Model is HOMAG ABD 050.

HOMAG S-200 (OPTIMAT KDF 130C): Edgebander (w/Premill & Corner Rounding) +"AIR TEC" EVA/PUR. -- Specifications0.3 - 3 mm (0.016 - 0.11") Edge; 8 -60 mm (0.312 - 2.375") panel thickness; 160 mm (6.375") min. panel length; 70 mm (2-3/4") min. panel width. -- Equipped with:Separating/cleaning agent spraying units. -- Premilling Station: (2) Motors @ 2.25 kW (3.0 HP) - 12.000 RPM; LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges. -- 100 mm Dia. diamond cutterheads. -- Integrated heated glue roller. -- AirTec Reactivation unit for: Zero edge finish. -- Automatic Edge Magazine for: Strip & coil stock; up to3 mm PVC. -- "Heavy-Duty" Guillotine. -- EVA "Quick-Change" glue pot & roller application unit. -- Pressure Section. 1st Roller driven plus: (2) Idle rollers; timed pneumatic pressure controlled. -- Feed Speed: 8 MPM. (26 FPM). -- Operator InterfaceHOMAG "easyTouch" Operator Interface with: 7" Graphic color touch display & soft keypad; intuitive, user-oriented navigation. -- (20) Storable programs guarantee flexibility when processing a wide variety of edge materials and changing customer requirements. -- Clear overview of the help & assistant functions, including the glue pot temperature or troubleshooting in plain text. -- Workstations End Trimming: (2) Motors each @ 0.35 kW (1/2 HP) 12,000 RPM; automatic chamfer from control panel 0° - 15°. -- Flush/Bevel-Fine/Radius Trimming Unit. (2) Motors: Top/Bottom; 0.55 kW (3/4 HP) - 12,000 RPM; 0° - 25° auto-tilt positioning from control panel with combination flush/radius/chamfer cutterheads. -- Includes (3) positioning options: Profile 1, Profile 2, & Profile 3: Flush trimming. -- Corner Rounding Unit. (1) Motor 0.35 kW (1/2 HP) - 12,000 RPM with: Automatic adjustment from control panel for: 1-Mil, 2-mil & 3-mil thickness. -- For leading & trailing edges, vertical corner rounding of panels: Ether radius or chamfer cutters can be mounted; 3 mm max. edge thickness. -- Scraping, multi-profile (PVC) Top/Bottom with (2) profiles: (1) 1 mm, 2 mm, or 3 mm in place of (2) 2 mm positioning of vertical & horizontal copy wheels. PVC scrape collection box. -- Buffing Unit: Top/bottom (2) motors; 0.10 kW (0.125 HP) - 2,800 RPM. -- Complete withMotorized hold-down pressure beam; padded sound enclosure, isolation transformer for multiple input voltages, used tooling, and original factory documentation. -- Actual Model is: HOMAG EDGETEQ S-200 (OPTIMAT KDF 130 C)NOTE: Owner States "Our objective is to be completely transparent with potential buyers and clearly state that the equipment is being offeredas-is, currently dismantled and stored." Buyers seriously interested can arrange an inspection at our warehouse, in FL, as they sit, in storage.

HOMAG - EDGETEQ S-240: Edgebander (w/Premill & Corner Rounding)Specifications • Solid Strip & Coil Stock; 0.3 - 3 mm (0.016 - 0.11") • Workpiece width 70 mm = thickness 8 - 22 mm• Workpiece width 120 mm = thickness 23 - 50 mm• Standard Workpiece thickness: 8 - 50 mm / 1.96" max.)• Fixed Feed of 11 MPM (36 FPM)Equipped with • Premilling Station: (2) Motors @ 2.25 kW (3.0 HP) - 12.000 RPM, LH & RH rotation. Diamond cutterheads & pneumatic jump control for chip-free and clean panel edges. • Integrated heated glue roller.• Automatic Edge Magazine for Solid Strip & Coil Stock; up to 3 mm. • "Heavy-Duty" Guillotine for Solid Strip & Coil Stock; up to 3 mm. • "Quick-Change" glue pot & roller application unit. • Pressure Section. 1st Roller driven plus: (2) Idle rollers; timed pneumatic pressure controlled. Operator Interface • HOMAG "easyTouch" Operator Interface with: 7" Graphic color touch display & soft keypad; intuitive, user-oriented navigation. (20) Storable programs guarantee flexibility when processing a wide variety of edge materials and changing customer requirements. Clear overview of the help & assistant functions, including the glue pot temperature or troubleshooting in plain text.Workstations • End Trimming: (2) Motors, each @ 0.35 kW (1/2 HP) 12,000 RPM.• Top/Bottom Flush-Fine Trimming Unit: (2) Motors, each @ 0.55 kW (3/4 HP) - 12,000 RPM.• Corner Rounding Unit. (1) Motor, 0.35 kW (1/2 HP) - 12,000 RPM. • Top/Bottom Scraping, with vertical & horizontal copy wheels & PVC scrape collection box.• Top/bottom Buffing Unit: (2) motors, each @ 0.10 kW (0.125 HP) - 2,800 RPM. Complete with • Hold-down top pressure beam; padded sound enclosure, used tooling, and original factory machine documentation. • Actual Model: HOMAG EDGETEQ S-240 (aka: KDF 230)

Maximum workable width of 24.02 inches (610 mm) Maximum workable length of 98.43 inches (2500 mm) Maximum workable height of 51.18 inches (1300 mm) Minimum working height of 9.84 inches (250 mm) It includes a preloading conveyor and an offloading conveyor, each measuring 118.11 inches (3000 mm) in length. The system is equipped with an NC21 Homatic Controller for precise operation. The main machine section weighs 21,385 pounds (9,700 kg), ensuring robust performance for heavy-duty tasks.