Woodworking Equipment For Sale

MORBIDELLI - CX 100: CNC Machining Center (Vertical) -- SpecificationsFlexible "Vertical" Machining Center that can produce up to (400) pieces per shift and ideal for batch productions and boring on (5) sides of the panel with maximum freedom in processing types of materials such as MDF, Chipboard, Lacquered Panels, and more! -- Working CapacityMax. part size for "X" axis is 120" (3,050 mm); "Y" axis is 51.1" (1,300 mm); max. part thickness: 3.7" (95 mm). (12) Vertical Spindles, (4) Horizontal Spindles in X-Direction, (2) Horizontal Spindles in Y-Direction.17" TFT Monitor; international keyboard; soft touch keypad & industrial mouse; RS-232 Serial ports; USB ports; (1) 1.44 MB floppy disk drive; (1) CD RW drive.Ethernet connection; real-time multitask processing; programs can be transferred via diskette or downloading by wire is possible. -- Complete with:Handheld Pendent control; (2) pneumatic part clamping devices; auto lubrication system; sound enclosure & safety devices. -- Actual Model is: MORBIDELLI CX 100

MORBIDELLI - CX 100: CNC Machining Center (Vertical) -- SpecificationsFlexible "Vertical" Machining Center reaches movement speeds of: 229 FPM (70 MPM) in "X" axis; 131 FPM (40 MPM) in "Y" axis; 98 FPM (30 MPM) in "Z" axis with total safety. -- Working CapacityMax. part size for "X" axis is 120" (3,050 mm); "Y" axis 51.1" (1,300 mm); max. part thickness 3.7" (95 mm).Min part size for "X" axis is 7.8" (200 mm); "Y" axis 1.96" (50 mm); min. part thickness of 0.31" (8 mm); automatic infeed & outfeed from the LH side. -- Boring Unit(1) Boring block with: (2) 3 HP (2.2 kW) Motors; variable speed: Up to 8,000 RPM; (24) independent vertical spindles.(2) NC Controlled "Split Heads" with: (12) Independent spindles: (7) In "X" axis & (5) in "Y" axis; the "Split Heads" are independent of each other in the "Y" axis.(11) Horizontal spindles with: (4 + 4) in "X" axis; (1 + 1) NC controlled split head spindles in "Y" axis; (1) additional horizontal spindle mounted on the upper head in "Y" axis.(1) "X" Axis grooving saw: Mounted on the lower head; variable speed up to 10,000 RPM; 125 mm max saw blade diameter.Minimum distance between the "Split Heads". Vertical spindles in: "Y" axis is 64 mm; min. distance between the "Split Heads" horizontal spindles in "Y" Axis: 231 mm; min. distance between the "Split Heads" vertical spindles in "X" axis: 295 mm.Maximum distance between the "Split Heads" vertical spindles in: "Y" axis is 1,780 mm; max. distance between the "Split Heads" horizontal spindles in "Y" axis: 1,525 mm; max. distance between the "Split Heads" vertical spindles in "X" axis: 1,493 mm. -- Machining(1) 8.8 HP (6.6 kW) Router with: HSK F63 Adaptor for automatic tool change; variable speed from 1,000 - 24,000 RPM.(1) 4-Position ATC tool rack mounted on the side of the machine base. -- Operator & Machine ControlPC Front-end with: SCM "XILOG MAESTRO" + Windows Operating System with: 3D graphics.Includes: 17" TFT Monitor; international keyboard; soft touch keypad & industrial mouse; RS-232 Serial ports; USB ports; (1) 1.44 MB floppy disk drive; (1) CD RW drive.Ethernet Connection. Real-time multitask processing; programs can be transferred via diskette or downloading by wire is possible. -- Complete with:Handheld pendent control; (2) pneumatic part clamping devices; auto. lubrication system; sound enclosure & safety devices. -- Actual Model is: MORBIDELLI CX 100

MORBIDELLI - AUTHOR M400 FM: Flat Table Machine (w/ATC) -- Specifications5' x 12' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing. -- Work Area:"X" Axis 143.7" (3,650 mm); "Y" axis 62.9" (1,600 mm); "Z" axis stroke 11" (280 mm), max material thickness is 6.69" (170 mm). -- Positioning Speeds"X" & "Y" Axis 279 FPM (85 MPM); "Z" axis 98 FPM (30 MPM).Closed loop AC Servo drive system with: Precision rack/pinion in "X" axis; recirculating ground ball screw in: "Y" & "Z" axes.All axes ride on precision prism linear guideways. -- Worktable5' x 12' Aluminum grid "MATRIX" vacuum table; machined with: Square grid pattern for fixturing parts; grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards.(6) Independent, NC controlled working zone areas; external pop up reference pins located on the sides & back of the table for positioning parts. -- Machining(1) 16-1/2 HP (12 kW) "Power 2000" Electrospindle with: Lifetime lubrication; HSK F63 adaptor; NC controlled spindle speeds from: 900 - 18,000 RPM.(1) 16-Position "Rapid-16" traveling ATC tool plate for "on the fly" ATC.NC Touch off Probe for: Automatic tool length setting. -- Operator & Machine ControlPC Front-End with: XILOG PLUS + Windows "7" Operating System; 17" high resolution LCD flat screen; ergonomic keypad.Includes: USB Ports; serial ports RS-232 & RS-242; Ethernet adaptor.Programs can be transferred via USB or downloading by wire is possible; all computer components are mounted on a mobile stand. -- "XILOG Plus" offers incredible list of functions from: (a) Auto-diagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- Additionally equipped with: Onboard mini-CAD with built-in programming for writing: Circles, ellipses, & angles with only a few keystrokes.Onboard cycle optimization; onboard calculator; mirror imaging & repeat imaging; all electronics mounted in an air-conditioned, dust-free environment control cabinet. -- Complete with:(2) 300 cbm/Hr "BECKER" Vacuum Pumps; automatic central lubrication; central optimized Dust Collection; emergency stop rope; perimeter safety fencing;handheld pendant control. -- Actual model: MORBIDELLI AUTHOR M400 FM.

ME R80 14" Radial Arm Saw

Infeed Deck & Conveyors. Infeed Deck: 12' motorized chain driven - 4 metal chains. Stationary table with 4 sets of 5.5" rollers for Moulder

Heavy Duty 5-Axis Machine ideal for high speed and precision routing/sizing/milling/triming & surfacing of wood & composite parts, as well as machining light alloys. -- Steel bar table with threaded holes in 23.6" x 11.8" (600 mm x 300 mm) centers for attaching fixtures and vacuum jigs; system comes with one removable center safety wall for penular load and unload work. -- Axis strokes & quick positioning speeds: X-Axis is 120" (3,050 mm) at 275 FPM (84 MPM); Y-axis is 62.2" (1,580 mm) at 275 FPM (84 MPM); Z-axis is 35.4" (900 mm) at 131 FPM (40 MPM). -- A-Axis is +/- 120° at 30 RPM.; C-axis is +/-360° at 30 RPM. -- Equipped with: (1) 7.5 kW (10 HP), ISO 30 Type air cooled ATC spindle, variable speed from 1,000 - 24,000 RPM with 8-position tool rack. -- "OSAI 10/510" Series CNC Control operating with WINDOWS/XP "Pro Multilingual", 15" LCD color display, large hard disk for program storage, network ready via Ethernet. -- Features: 5-Axis simultaneous motion, M & G code programming operation. -- Complete with: Safety enclosure and automatic doors. -- Options: A- & C-Axis alignment system for re-setting both polar axes, please add ...$ 3,600; Radio touch probe system add ...$ 9,580; OSAI Teach Pendant System add ...$ 3,775.

MULTICAM - 5000 5-305-R: CNC Router - 6' x 12' & with ATC80" x 144" Fixed table; moving gantry machine in a front-to-back configuration with: Multi-zone vacuum table supported by: (1) 20 HP Vacuum Pump. Equipped with: -- (1) 113.6 HP HSD HSK (New in 2020) type routing spindle; liquid cooled with: "Ride-a-long" 8-pos. tool carousel; variable speed by inverter up to 24,000 RPM. -- Full table coverage on X- & Y-axis; rack & pinion gantry drive with: Brushless Servo motors using: Integrated 25 mm linear roller bearing rack system. -- 8" Z-Axis travel via lead screw drive; 1,200 IPM max. cutting feed; 2,400 IPM max. rapid traverse rate on X- & Y-axis. Control -- FANUC "Oi" Series CNC Controller (new in 2019). Stand-alone system based on: AMD "SC520" microprocessor with: 64-Bit motion algorithms using FPGA technology that excels in: High speed; continuous motion.(5,000) Vectors/Sec sustained calculation & execution rate and (1,000) line "look ahead". -- The Controller includes: Keypad interface with hot keys for repetitious functions; DNC access to host computer. -- Includes: Memory for instant job replay; 32-bit processor; 8 MB RAM; 2 MB flash memory; interprets HPGL and M & G codes; RS-232 interface for PC communication. Complete with: -- Documentation. -- Assorted tool holders. -- 20 HP Vacuum Pump. -- Remote control.

MULTICAM 3000 SERIES 3-103-R 4 X 8 with ATC:50" x 100" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 16.9 HP vacuum system . -- Equipped with:(1) 13.4 HP HSD Routing HSK spindle, variable speed by inverter up to 23,000 RPM with 6-position rear mount tool changer.. -- Full table coverage:On X- & Y-axis, rack & pinion gantry drive with brushless Servo motors using integrated 25 mm linear roller bearing rack system, 6" Z-axis travel via lead screw drive; 1,400 IPM max. cutting feed, 2,500 IPM max. rapid traverse rate on X- & Y-axis. -- Control:The MULTICAM CNC controller is a stand-alone RISC/DSP system. The controller includes a keypad interface with hot keys for repetitious functions and DNC access to host computer. Memory for instant job replay, 32-bit processor, 12 MB RAM & 2 MB flash memory, interprets HPGL and M & G codes, RS-232 interface for PC communication. -- Complete with:16.9 HP vacuum pump, assorted tool holders, PC and manuals.

(2) Saws sold as a pair Used for ripping 48" plywood and wafer board Saws can be adjusted anywhere on the shaft. Single Phase motors and variable speed drive motor, 2hp on main shaft.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5y 15 HP Fan motor, free-standing interior/exterior unit rated @ 3,900 CFM. Equipped with: (48) Filter bags having a total of 352 sq. ft. of cloth filter area in a fabricated steel enclosure; 12" dia. inlet. Magnetic starter; rotary air lock, estimated weight: 3,500 Lbs. Unit stands 13.5' tall when fully assembled, but with the legs and muffler removed, it can easily be transported on an open 5'x10' trailer. Machine State: Still in place, but disconnected NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

MURPHY-RODGERS HEC-216-S/10 33,000 CFM Continuous Duty Automatic Self-Cleaning Pulse Jet Baghouse Dust Collector Equipped with: (216) 5" Dia. x 10' L Cloth filter bags for a total of 2,827 sq/ff. of filter area. (2) 42-1/2" W x 68" H & (2) 40-1/2" x 68" H Top access doors. (3) Front & (2) side 27" W x 54" H Filter access doors. (2) Square cone bottom hoppers, Each with, 25" x 25" Discharge openings. System utilizes (2) 4-1/2’ x 6’ x 4’ H Waste containers (NOT included). CHICAGO 100 HP - 1,780 RPM Roof-mounted blower, with 41” Dia. inlet. Motorized dampers for winter & summer modes. Winter mode: Directs air back into building, reducing heat loss. Summer mode: Directs air outside, cooling building. Electrical controls (as pictured). Complete with: Spare Filter Bags. NOTE: Installed Used in 2016 with "New" 100 HP motor, new bearings in blower & "New" spring mounts. NOTE: Variable Frequency Drive needs to be replaced. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

NANXING NCG 2512L CNC FLAT TABLE MACHINE (W/LOADING/UNLOADING) + Auto Label Printing Application: -- Specifications:Bridge Gantry with 4' x 8' "Matrix" grid Phenolic surface table for "Nested Base Manufacturing", Automatic Loading and Unloading System with Vacuum cups & Sweeping Arm.Loading flow from Left to Right configuration. -- Work area:"Matrix" grid Phenolic surface flat table designed for "Nested Base Manufacturing". -- Working cap.:"X" Axis is 98.4" (2,500 mm), "Y" axis is 48" (1,220 mm) & "Z" axis is 9.8" (155 mm);Max. programmable speed: "X" & "Y" Axis 98 FPM (30 MPM), "Z" axis 65 FPM (20 MPM). -- Boring Unit:(10) Independent vertical boring spindles with (5) spindles in "X" axis & (5) spindles in "Y" axis, for 10 mm tools max dia. and 35 mm max. bore and 32 mm OC; -- Machining:(1) 12 HP (9 kW) Vertically mounted HSD electro-spindle router with HSK-63F adapters, Inverter controlled variable spindle speed up to 24,000 RPM, with max. torque from 12,000 RPM.(1) 8-Position Automatic tool changer with "revolver type" ATC tool plate. -- Operator & Machine Control: "SYNTEC" Controller, English language cutting/optimizing software, MS-Windows "10" based technology,32-bit Pentium - 400 MHz processor (w/operating system for Windows 7), 4 GB hard drive,15" Dell, international keyboard, soft-touch keypad & industrial mouse and USB port. -- Complete with:(2) 7.5 HP (5.5 kW) air-cooled vacuum pumps that provide 5,650 cu.ft./hr. (160 m3/hr.) of suction power: Safety & Emergency stops: Automatic lubrication system for guides & ball screw: Auto-Transformer for voltages between 200-600 V: -- Options Include: (1) NC Controlled infeed Scissor Lift table with vacuum loading Automatic Label Printing Station with Automatic Material Alignment (1) Rake system (1) NC controlled & powered flat belt outfeed table with vacuum sweeping system Tool Touch-Off Probe with automatic program update according to the tool length. Actual Model is NANXING NCG 2512L

NASH 50-72 Spindle Sander(10) Spindles, 72" chucking cap., 3/8" - 6" dia. range;Specifications: -- 2-1/4" Dia. main arbor with long keys for driving head & tailstock wheels. -- Variable spindle speeds from 700 - 3,000 RPM, 7.5 HP spindle motor, 2 HP feed & oscillation rack motor, variable oscillating speed (60 - 120) strokes/Min, oscillating stroke adjustable up to 2" in length. -- (5) 72" Sanding racks, self-adjusting & oscillating. -- Equipped with: Overhead mounted dust hood, push-button control panel; production rate of (10 - 30) pieces/Min. -- Includes: brushes and sandpaper

NASH - 50-72: Spindle Sander -- (10) Spindles; 72" chucking. -- Cap., 3/8" - 6" dia. range; 2-1/4" dia. main arbor with long keys for driving head & tailstock wheels. -- Variable spindle speeds: 700 - 3,000 RPM; 7.5 HP spindle motor. -- 2 HP Feed & oscillation sanding rack motor; 60" max. sanding cap. with: (5) Sanding racks, self-adjusting and oscillating. -- Variable oscillating speed: (60 - 120) Strokes/Min; oscillating stroke adjustable up to 2" in length.Equipped with: -- Overhead mounted dust hood., -- Push-button control panel; production rate of (10 - 30) pieces/Min.

New Venture Manufacturing Gang Rip Saw Hydraulic Tank (5) Moving Blades Laser Tower Touchscreen Controls This machine has been removed from service. The photos showing the system setup were taken before it was removed

NEWCNC - Smart ER Series I 510: CNC Router w/ATC & Lathe5' x 10' FLAT TABLE CNC ROUTER W/ATC & LATHE: Great for "Nested Base Manufacturing" or just about any type of 3-Axis work. -- Working Table: 63" (1,600 mm) x 122" (3,100 mm). - (4) Pop-Up stops to aid in panel positioning; an "M-code" controlled 4-zone electrovalve; special high flow Vacuum Table System. -- X- & Y-Axes Speed: 3,181 IPM (265 FPM / 83 MPM) & Z-Axis: 350 IPM (29 FPM / 12 MPM) for quick traverse positioning that reduces total CNC machining time between cutting cycles. - "YASKAWA" Servo drives power the axes movement. -- Industrial machine tool welded structurally engineered: Machine base provides a solid foundation for superior cut quality; entire frame is stress relieved & heat treated. -- Moving gantry bridge. Travels on: "THK" Large thick hardened & precision ground rectangle linear guide slider-ways giving extra smooth movement for high-speed traverse & accurate cutting. -- Tool Gantry & Bridge Movement: Large thick inclined rack & pinion teeth; vertical axis travels on a large diameter precision ball screw for smooth consistent movement. -- Machining: (1) 12.6 HP (9.4 kW) Air-cooled SCM Router spindle with: "HSK 63F" Adaptor; variable programming speeds: From 1,000 to 22,000 RPM. -- Tools are loaded into the "SCM" spindle by: (1) 8-position plate "on the fly" ride along carousel ATC (automatic tool changer). -- Tool heights can be set using the Tool Length setting gauge (included); machine requires ER-32 tool collets. -- CNC Control: Industrial Grade "OSAI 10/510" OPEN CNC control with: 19" Color monitor; includes self-diagnosis & alarm history display & background editing; up to (4) simultaneously controlled axes with: 3D simulation; helical interpolation; tool offset; length compensation & backlash compensation. -- Compatible with virtually all CAD/CAM programming software on the market; you choose the software that best suits your needs. -- Includes: (1) 7-1/2 HP (5 kW) "Rotary Vane" type Vacuum Pump. -- Complete with: Dust hood with 6" manifold connection; Tool Length setting gauge; "MPG" handheld wheel remote; safety bumper system on both sides of the moving bridge; safety bar around the back of the machine. -- Options Include: (1) 12' Lathe attachment with: Chuck & tailstock (...$ 8,450 value); (1) additional 7.5 HP (5 kW) Rotary Vane Vacuum Pump (...$ 5,150 value).

NEWCNC - Smart ER Series II 510: CNC Router w/ATC & Boring5' x 10' FLAT TABLE CNC ROUTER W/ATC & BORING: Great for "Nested Base Manufacturing" or just about any type of 3-Axis work. -- Working Table: 63" (1,600 mm) x 122" (3,100 mm). (4) pop-up stops aid in panel positioning & a "M-code" controlled 4-zone electro valve special high flow vacuum table system. -- X- & Y-Axis speeds are: 3,181 IPM (265 FPM / 83 MPM) and Z-axis is 350 IPM (29 FPM / 12 MPM) for quick traverse positioning that reduces total CNC machining time between cutting cycles. - "YASKAWA" Servo drives power the axes movement. -- Industrial machine tool welded structurally engineered machine base provides a solid foundation for superior cut quality; the entire frame is tress-relieved & heat treated. -- The moving gantry bridge travels on: "THK" Large thick hardened & precision ground rectangle linear guide slider-ways giving extra smooth movement for high-speed traverse & accurate cutting. -- Tool gantry & bridge movement by: Rack & Pinion w/large, thick inclined teeth; the vertical axis travels on a large dia. precision ball screw for smooth consistent movement. -- Machining. (1) 12.6 HP (9.4 kW) Air-cooled SCM Router spindle with: HSK 63F adaptor, variable programming speeds from 1,000 to 22,000 RPM. -- Tools are loaded into the "SCM" spindle by: (1) 8-Position plate "on the fly" ride along carousel ATC (automatic tool changer). -- Tool heights can be set using the Tool Length setting gauge (included); machine requires ER-32 tool collets. -- CNC Control: Industrial grade "OSAI 10/510" OPEN CNC control with: 19" Color monitor; includes self-diagnosis & alarm history display & background editing; up to (4) simultaneously controlled axes with: 3D Simulation, helical interpolation, tool offset, length compensation, & backlash compensation. -- Compatible with virtually all CAD/CAM programming software on the market; you choose the software that best suits your needs. -- Includes: (1) 7-1/2 HP (5 kW) "Rotary Vane" type Vacuum Pump. -- Complete with: Dust hood with 6" manifold connection; Tool Length setting gauge; "MPG" handheld wheel remote; Safety Bumper System on both sides of the moving bridge, and safety bar around the back of the machine. -- Options Include: (1) 10-Spindle Vertical Boring Block with (5) independent spindles in "X" axis & 5 independent spindles in "Y" axis (...$ 8,450.00 value). (1) Additional 7-1/2 (5 kW) Rotary Vane Vacuum Pump (...$ 5,150 value).

Newman S-382 Hydraulic Drive Double Planer Very Good Condition

NEWMAN 990 Planer-Matcher 16 knife heads 6-roll fabricated frame 12" width capacity 6" thickness capacity Side head servo positioner Top head servo positioner Factory (Newman) conversion electric feed roll drive with 6 individual drive motors and direct coupled PlanetGear speed reducers on each feed roll. (25 HP) 150 HP Top Head 100 HP Bottom Head 75 HP Left Side Head 50 HP Right Side Head Several spare side heads Spare 75 HP left side head motor All standard TEFC motors All air and hydraulic valves are new in 2019 Also includes 2019 Newman pineapple feed table with electric drives 3 each 20 HP direct drives on top feed rolls with PlanetGear Reducers 1 ea 25 HP direct drives on top feed rolls with PlanetGear Reducer Newman bridge with direct drive and PlanetGear Reducer 2019 aux hydraulic pump unit for press roll positioning & pressure bar Omega moisture detection & marking equipment 5-strand deck 16' wide x 11' long with hook stops, with tipple on tail end, with additional short 55-strand integrated into the feed table.

Newman HP-688 Twin Bay Hydraulic Cold Press6-Sections (top platens) each 24" x 30" each, Center posts between third and fourth platens, creating two overall areas of 30" x 74". Specifications: -- Max. fixed opening 48" with 11" cylinder stroke, each platen section has (1) 10" bore with 5" dia. ram cylinder; -- Each platen is 15/16″ thick and it’s back structure is webbed every 5-1/2″ X 7-1/2″. -- Side-mounted self-contained hydraulic system w/tank, 10 HP continuous operating pressure compensating pump. -- Hand-Valves to Cycle Individual Platens with pressure gauges for each platen. -- Idle Pop-Up Bed Rollers in the bottom platen for easy loading and unloading.Over all the press is in excellent condition, is extremely heavily built, and is also a beautiful impressive press in person.