Woodworking Equipment For Sale

SCHELLING FM-430/410 CNC Front Load Panel SawSpecifications & Features: 169" (4292 mm) Cutting length & 165.3" (4,200 mm) pull back, 3.75" (95 mm) max. saw blade projection; 25 HP (19 kW) 4,100 RPM main & 3.4 HP (2.5 kW) 5,600 RPM scoring motor. -- Equipped with: Variable saw carriage travel speed from 0 - 278.8 FPM (85 MPM), constant return of 278 FPM (85 MPM). -- Electronically controlled overhead program fence with rack & pinion driven on both sides; forward speed from 0 - 278 FPM (85 MPM), return speed of 278.8 FPM (85 MPM); equipped with (8) gripper clamps (open up to 5" (130 mm). -- Features: SCHELLING "COMPOSER" IBM-AT Compatible Computer Control; aftermarket color monitor (displays cutting dimensions and patterns w/moving graphics) , self-diagnostic, data input by keyboard; onboard optimization program. -- Complete with: 2-3/4" to 87" (2,200 mm) Long side/cross-cut aligning zone, (1) aligner in front & (1) behind the cut line. -- (3) Front mounted air float tables for moving panel from rip section to the cross-cut section, (2) movable and (1) fixed; each with their own blower. -- Rear of machine fully enclosed for safety with man-height sheet metal panels & wire screen windows. T

Schultz Tool Veneer Bladder Membrane Press Seller’s Soecification: - Veneer Membrane Press - Approx. 55?x106? press capacity - Hot air design w/ 3mm silicone membrane - Specification – - Typical cycle time of 3 min. using proper glue that sets at 200° F - Can use PVA, but extends cycle time to approx. 15-45 min. depending on glue mix to achieve 80%+ cure strength - All mechanical components operational - Needs 4 to 5 heating rods replaced. - We have replacements but do not have the ability to replace them - Current operational temperature is 150°

Schuetz Tool Bladder Press Specifications: (2) Shuttle tables, approx. 55” x 106” press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200°F. Can use PVA which would extend cycle time to approx. 15 > 45 minutes depending on the actual glue mix used to achieve 80%+ cure strength. Includes Hydraulic Pump. SPECIAL NOTE: Fully operational, however, need 4 or 5 heating rods replaced, new rod parts are included for you to install ( don't have the capability to remove them). The current average operational temperature is 150° F. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

--In Auction--Starting bid: $100-- Schuetz Tool Bladder Press Specifications: (2) Shuttle tables, approx. 55” x 106” press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200°F. Can use PVA which would extend cycle time to approx. 15 > 45 minutes depending on the actual glue mix used to achieve 80%+ cure strength. Includes Hydraulic Pump. SPECIAL NOTE: Fully operational, however, need 4 or 5 heating rods replaced, new rod parts are included for you to install ( don't have the capability to remove them). The current average operational temperature is 150° F. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Tubeless Vaccum (TNV) Electro-Spindle with HSK63F quick release Toolholder Rotation speed 600-2400 rpm Air Cooling by rear electrofan Static Inverter Centralized dust collection system with automatic blast gates

SCM - S520 E, ...Planer Specifications: -- 20" Width cap.; 9 HP main motor; 4-3/4" dia. 4-knife TERSA cutterhead at 4,500 RPM. -- 1/8" - 9-1/4" Powered opening with digital readout for fine adjustment; max. depth of cut 5/16"; 10" min. length of workpiece. -- (4) Feed speeds: 20 - 33 - 43 & 56 FPM; table size 20-3/4" x 39".Equipped with: -- Chip breaker; sectional grooved infeed & solid outfeed rollers; (2) adjustable bed rollers. -- Complete with: Magnetic starter & shaving hood.

2008 SCM Morbidelli Universal 3612

SCM PRATIX S-15-B FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:Single 5' x 12' traveling "Bridge Gantry" and stationary aluminum dual vacuum table with a MATRIX square grid pattern for fixturing parts.Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested base machining".(8) Part location pop-up pins mounted on the table perimeter. -- Working field:"X" Axis is 145.11" (3,686 mm); "Y" axis is 61.2" (1,555 mm); "Z" axis stroke is 9.8" (250 mm); max. material thickness 4" (100 mm). -- Positioning Speed:"X" & "Y" Axis 115 FPM (35 MPM); "Z" axis at 82 FPM (26 MPM); closed loop AC Servo drive system.High precision "Rack & Pinion" system in "X" & "Y" axis & ground ball screws "Z" axis; all axes ride on extra large precision profile linear guideways. -- Boring Unit:3 HP (2.2 kW) - 6,000 RPM motor; (7) vertical spindles on 32 mm centers, (5) in "X" axis & (2) in "Y" axis. -- Machining:(1) 9 HP (6.7 kW) Air-cooled electro spindle with HSK F63 adaptor; variable spindle speeds from 1,500 - 24,000 RPM.(1) 14-Position ATC tool rack mounted to the machine base. -- Operator & Machine Control:PC Front End with: "XILOG Plus" + Windows "XP Pro" Operating System; 17" high resolution LCD; ergonomic keypad.USB Ports, serial ports RS-232 & RS-242 & Ethernet adaptor; programs can be transferred via disk or downloading by wire is possible.All computer components are mounted on a mobile stand.XILOG Plus Offers: Incredible list of functions from: (a) Auto-diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- Additionally equipped with:Onboard mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes; Onboard cycle optimization, onboard calculator, mirror-imaging, and repeat imaging. -- Complete with:(1) 300 m³/Hr Vacuum Pump; external transformer 208/230/480 Volt; safety enclosure around the spindle carriage; tool length probe sensor; manual centralized lubrication.Includes: (1) Universal Remote Pendant, 7" color display allows for the effective management of all machine functions from manual Jog Mode to loading & execution of a program.The pendant is fitted with a USB port to allow quick load & setup of new programs; safety "bump-stop" bumpers; emergency stop rope & manuals. -- Actual Model is SCM - PRATIX S-15-B.

Worktable dimensions: 145? x 61? Z -Axis stroke: 9.84? Spindle speed: 24,000 RPM Electrospindle (S1/S6 rating): 7.5 HP / 9HP Tool Changer: 10 position Spindle Taper: HSK 63 Boring Block (7) Spindles: 6,000 RPM Maximum positioning vectorial speeds: X/Y axis: 115 feet/minute Electrics: 208/230/460 volts, 3-phase, 60 cycles EQUIPPED WITH: Windows Based Operating system 17” Flat Panel Monitor Remote Pendant with 7? Display 7-Spindle Boring Block Touch Probe Spindle Air Blowers Built In Vacuum Pumps- 2 Zones

SCM Minimax T-50 Tilting Spindle Shaper -- Specifications: -- 1-1/4" Dia. interchangeable spindle tilts -5° to +45°, -- 6.6 HP motor; 3-1/2" cap. under nut, (4) spindle speeds of 1,700 - 4,000 - 7,000 & 9,000 RPM. -- Table size 18" x 43" with adjustable side extension tables; 3" - 5" - 7" & 8" table insert openings -- 4-1/2" max. spindle height above table -- 2" max. tooling retraction under table with 7" max. tooling dia.; working height 37".Equipped with: Outrigger Sliding Table, micro-adjustable fence, spindle lock, magnetic starter w/overload protection, reversing switch, and 4-3/4" dia. dust outlet. Includes: Several New Cutter-heads

SCMI OLIMPIC S1000 T-ERL EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) -- Specifications:Edge Capacity, 0.4 to 15 mm (0.016 to 5/8") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2.0" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 5.25 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning and Diamond Cutter-heads. -- Anti-Adhesive Spraying System: Top/Bottom, positioned prior to the Pre-Milling Unit, it prevents glue buildup on the work-piece surfaces. It consists of (2) independent spray nozzles, and a tank for anti-adhesive liquids. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station, Vc/1000: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0ø - 15ø, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit, Rsp: Top/Bottom, 2 x 1.5 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit, Ri/S: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit, Round-K: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. Comes with (2) pre-set pneumatic positions to allow to go from thick to thin pvc automatically. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RCA/2c": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12°. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that may be lost during the edge scraping process.Controls: -- Startouch Controller, 12" color touch screen, swivels 270° at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 40/60 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all

SCM OLIMPIC K 360ERT HP COMPACT EDGEBANDER (W/PRE-MILL & CORNER ROUNDING):Specifications: -- Edge Capacity, 0.4 to 6 mm (0.016to 1/4") for strip feeding. -- Panel Capacity, min. width 65 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-1/2").Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator, pneumatic in/out positioning. -- Pre-Milling Station, RT-VP: Spindles 2 x 2.0 HP, 19,000 RPM, (1) with PLC controlled jump action and diamond cutter heads. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Manual digital positioning, (3) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station: Front & rear 2 x 0.25 HP, 12,000 RPM motors mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Trimming Unit Flush/Bevel/Radius: Top/Bottom remote (via control panel) pneumatic positioning for (3) settings, flush/bevel/radius trimming, 2 x 0.7 HP - 12.000 RPM motors with precision digital indicators for quick setup. -- Profile Scraping Unit "RAS/V": Top/Bottom, manual pre-set up with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°. Operator Interface: -- Orion 1 Plus Controller, fixed at in-feed of machine. with "Touch Screen" control with soft keys, graphics and LCD display panel. It handles most machine set-up functions and workstations. Complete With & Features: -- Feed-speed, 36 FPM fixed, 1 x 2.0 HP feed drive motor; 200 Hz frequency inverter for all trimming units. -- Manual adjustable hold-down pressure beam, full sound enclosure cover and outboard panel support. -- Actual Model is SCM OLIMPIC K 360ERT HP

SCM OLIMPIC K360 ERT HP: Compact Edgebander (w/Premill & Corner Rounding)Specifications -- Edge Capacity: 0.4 - 6 mm (0.016 to 1/4") For strip feeding. -- Panel Capacity: Min. width 65 mm & 140 mm min. length (2-3/8" & 5-1/2"); panel thickness: Min./max. 8 - 60 mm (3/8" - 2-1/2").Equipped with: -- Adjustable Infeed Fence: Manually preset with digital indicator, pneumatic in/out positioning. -- Premilling Station RT-VP: Spindles (2) x 2.0 HP - 19,000 RPM; (1) with PLC controlled jump action & diamond cutterheads. -- Automatic Strip & Coil Feed Magazine: For straight edges & 3 mm guillotine for coils. -- Gluing Station for EVA (Hot Melt) with: Teflon coated glue tank & quick disconnect to change glue tanks fast if needed; heat up time: Approx. (10) Min. -- Pressure Section: Manual digital positioning; (3) pressure rollers: First larger; Teflon coated & powered. Workstations -- End Trimming Station. Front & rear: (2) x 1/4 HP - 12,000 RPM motors; mounted on THK guides; swivels 0° - 15°; rapid setup between straight & angled cutting with: Automatic swivel cylinder. -- Trimming Unit Flush/Bevel/Radius: Top/Bottom remote (via control panel) pneumatic positioning for (3) settings; Flush/bevel/radius trimming; (2) x 0.7 HP - 12.000 RPM motors with: Precision digital indicators for quick setup. -- Corner Rounding Unit "Round 2M" with: (2) 0.8 HP Independent motors that slide on THK guides. -- Profile Scraping Unit "RAS/V": Top/Bottom, manual preset up with digital indicators; large dia. copy wheels for max. accuracy & pneumatic in/out positioning. -- Buffing Unit: Top/bottom; (2) x 1/4 HP - 2,800 RPM motors; tilting up to 12°. Operator Interface -- ORION "1 Plus" Controller. Fixed at infeed of machine with: "Touch Screen" control with soft keys, graphics, & LCD display panel; handles most machine setup functions & workstations. Complete with & Features -- Feed speed: 36 FPM Fixed; (1) x 2.0 HP feed drive motor; 200 Hz frequency inverter for all trimming units. -- Manual adjustable hold-down pressure beam; full sound enclosure cover; outboard panel support. -- Actual Model: SCM OLIMPIC K360 ERT HP

SCM Accord 30 FX-M 5-Axis CNC Router: -- Working SpecificationsTable Dimensions 12' x 5' (3,650 mm x 1,560 mm x 330 mm) or 143.7" x 61.4" x 13". -- Technical Specifications: C-axis stroke = 640°, B-axis stroke = 270°,Electro spindle with HSK F 63 quick-release tool-older, rotation speed 600 - 20,000 RPM, power max. 11 KW (15HP) from 15,000 RPM (on s1 duty) 7 kW (9 HP) from 7500 RPM (on S1 duty), 15 KW inverter (20 HP S6), automatic exhaust hood with several positions and ON-OFF by workpiece program, C-axis equipped with TTS locking system. -- Positioning Speeds Rapid traverse of x-axis = 90 m/min (295 FPM), rapid traverse of y-axis = 90 m/min (295 FPM), rapid traverse of z-axis = 30 m/min (90 FPM),Component passage 330 mm (13";) axes traverse X-Y-Z interpolating axes, Brushless motors. automatic lubrication -- Control Unit numeric control OFFICE-PC operating system using MICROSOFT Windows, 17" LCD display, hard disk 500 GB RAM memory network card. -- Operator Interface XILOG PLUS: Workpiece geometry programming by graphic editors or open editor,Automatic execution of a program or multi-concatenated programs subprograms and user macro-management, DXF files import, machining optimizer, multi-tool equipment management dynamic control of accelerations, safety devices, fixed metal bulkhead along two sides, photocells on two sides, anti-ejection bars on the machining head, access to both front and rear sides of the worktable. -- Complete with Air-conditioned electrical cabinet. PRISMA K machining head. Rapid 16 Position Tool Changer. Automatic tool touch-off probe. (2) 250 m³/Hr Vacuum Pumps. Perimeter Safety Devices -- Actual Model is SCM ACCORD 30 FX-M.

SCM - SI 400 NOVA: Sliding Table Panel SawSpecifications & Features: -- 126" Stroke with scoring; telescoping crosscut fence with panel support; back squaring fence: (2) Flip stops; 3/4" dado capacity. -- Max. cutting height: 3-3/4" at 90°; 2-3/4" at 45°; 51" rip cut cap. with movable fence; "EZ Dial" adjustable split scoring blade assembly. -- 35" x 21" Main fixed table.Equipped with: -- 9 HP Main blade motor; 1 HP scoring blade motor; tilting arbor 0° - 45°; 300 mm (11.8") main saw blade dia.; 1" main blade arbor; 4,000 RPM. -- 100 mm (3.9") scoring blade dia.; 3/4" scoring blade arbor; 8,000 RPM; 2-position table lock mechanism. Complete with: -- "EZ Dial" Adjustable split scoring blade assembly: Simply turn the dial to adjust the width of the score.This system eliminates the need for shims and is fully adjustable in 0.1 mm increments. -- Handwheels in front for lifting & tilting of saw blades; blade guard on riving knife with dust outlet. Includes: 120 mm Main dust collection outlet.

SCM IMPACT C Front-Load Panel Saw Working Capacity:149.6" (3,800 mm) max. rip cut, 149.6" (3,800 mm) pusher stroke, 4.33" (110 mm) saw blade projection;380 mm dia. Main blade with 80 mm bore & 200 mm dia scoring blade with 80 mm bore,17 HP (13 kW) Main saw motor, 3,900 RPM main blade speed, 2 HP (1.5 kW) scoring motor, 6,300 RPM score blade speed.Positioning Speed:Feed speed for saw carriage from 20 - 442 FPM (6 - 135 MPM), return speed of 442 FPM (135 MPM);Automatic saw carriage lubrication, balanced on hardened cylindrical guides, external score saw adjustment, THK guides for vertical saw movement.Pusher Fence:Programmable rear fence with rack & pinion movement, 78 FPM (24 MPM) forward speed, 262 FPM (80 MPM) return speed; (8) material gripper clamps, grippers fit into a slotted pressure beam for positive material control during the final cut.Operator & Machine Control: PC Front-end with 64 X2 Dual Core Processor 5000+ 2.60 GHz, 896 MB of Ram,15" Color super VGA monitor, on-screen diagnostics & production reports. SCM "WinCut" real-time operation software with onboard optimizer.

2005 SCM SIGMA IMPACT 105 PLM Panel SawSpecifications: -- Overall Foot Print - 19ft x 23ft÷Max cutting length and cutting width - 126". -- Max blade projection - 4.13"; max cutting height - 3.63"; machine cutting tolerances - +/- .006"; main saw motor - 18 HP (variable to 3800 RPM); main blade dia. - 15" (4300 RPM); scoring saw motor - 2 HP (eliminates chipping on bottom sheet); scoring blade dia. - 8". -- Equipped with: -- High Speed rack and pinion saw carriage - brushless A/C motor (saw carriage speeds 0-446 ft/min); pusher speeds 0-330 ft/min; automatic side aligner ensures tight cut tolerances (2.8 to 48" aligning zone); variable 0-3900 RPM; 19.5" wide rear phenolic table for cross cutting narrow strips; (1) 2' x 8' fixed front load air table; (2) 2' x 5' movable front load air tables. -- Complete with: -- Premium Plastic Configuration (7) clamps with thin plastic configuration, air cooling of the main blade with mist lubrication; pneumatic quick blade change - no tool required. -- Operating air pressure - 7 ATM (95 to 105 P.S.I); Dust extraction 2100-2800 CFM; Power - 80 amps @ 230 volts 3-phase, 60HZ (+/- 5% voltage); Dell PC, Windows XP; Win Cut Optimization software

SCM - ACCORD 25 FX-M: CNC Machining Center (w/ATC) -- Specifications4' x 20' Aluminum "MATRIX" grid 2-zone vacuum table. -- Working Capacity"X" Axis 242.9" (6,170 mm); "Y" axis 51.9" (1,320 mm); "Z" axis stroke 17.3" (440 mm); 9.8" (250 mm) max. material thickness. -- Positioning speed"X" & "Y" Axis 197 FPM (60 MPM); "Z" axis is 82 FPM (25 MPM).Movement control: by AC Brushless motors & YASKAWA drives; high precision rack & pinion system for "X" & "Y"; precision ball screw for "Z" axis.Working unit travels on prismatic guideways & sliding blocks with: Preloaded recirculating balls; NC controlled automatic lubrication system. -- Worktable"FX-MATIC" Aluminum "MATRIX" Grid 2-zone vacuum table with: (6) Adjustable pneumatic pop up reference stops; can be positioned on the perimeter of the worktable. -- Boring Unit3 HP (2.2 kW); Boring block with: (8) Independent vertical units; variable speed from: 2,000 - 8,000 RPM; (4) bits in "X" axis & (4) bits in "Y" axis.(1) NC Controlled "X" Grooving saw: Max. 125 mm dia. blade(4) Horizontal Boring units with: (2 + 2) In "X" axis; (2 + 2) in "Y" axis. -- Machining Units(1) 16 HP (12 kW) Electrospindle router with: HSK F63 Adaptor; rotation speed: 600 - 24,000 RPM.Constant torque achieved at: 12,000 RPM; Router controlled by: 12 kW Inverter for stepless speed & rapid shutdown rotation.(1) Rapid 16-position ATC plate mounted at the back of the "Y" axis carriage for: "On the fly" ATC; center distance between tools: 104 mm (4.13"); max. tool dia.: 300 mm (11.18"); max. tool weight/tool: 8 kG (17.6 Lbs). -- Operator InterfacePC Front with: SCMI "Xilog MAESTRO" + "eye-M" + Windows "10-IOT" 64-bit Operating System. 21" Full HD, LCD Display; ergonomic industrial keyboard & mouse; central USB connection; RJ45 Ethernet port for possible link to an office PC. "Xilog MAESTRO" + "eye-M" Software: Full real time 2-3D graphic interface for programming assistance & error diagnostics. -- Complete with:Tool Touch-off Probe; "TECPAD" handheld mobile console with 7" Color display; "Pro-Space" safety system with photocell barriers & bump-stop; safety fences; 208 / 230 / 460 V multitap autotransformer for various voltages. -- Actual Model: SCM ACCORD 25 FX-MNOTE: No Vacuum Pump is included with this machine.

SCM - ACCORD 25 FX -M: CNC Machining Center (w/ATC) -- Specifications4' x 20' Aluminum "MATRIX" grid 2-zone vacuum table. -- Working Capacity"X" Axis: 242.9" (6,170 mm); "Y" axis: 51.9" (1,320 mm); "Z" axis stroke: 17.3" (440 mm) & 9.8" (250 mm) Max. material thickness. -- Positioning Speed"X" & "Y" Axis 197 FPM (60 MPM), "Z" axis is 82 FPM (25 MPM).Movement controlled by: AC Brushless motors; YASKAWA drives; high precision rack & pinion system for "X" & "Y"; precision ball screw for "Z" axis.Working unit travels on Prismatic guideways & sliding blocks with: Preloaded recirculating balls; NC controlled automatic lubrication system. -- Worktable"FX-MATIC" Aluminum "MATRIX" Grid 2-zone vacuum table with: (6) Adjustable pneumatic pop up reference stops; can be positioned on the perimeter of the worktable. -- Boring Unit3 HP (2.2 kW) Boring Block with: (8) Independent vertical units; variable speed: 2,000 - 8,000 RPM; (4) bits in "X" axis; (4) bits in "Y" axis.(1) NC Controlled "X" Grooving saw: 125 mm Dia. blade.(4) Horizontal Boring units: (2 + 2) in "X" axis' (2 + 2) in "Y" axis. -- Machining Units(1) 16 HP (12 kW) Electrospindle router with: HSK F63 Adaptor; rotation speed: 600 - 24,000 RPM.Constant torque achieved at 12,000 RPM: Router controlled by 12 kW inverter for stepless speed & rapid shutdown rotation.(1) Rapid 16-position ATC plate: Mounted at the back of the "Y" axis carriage for "on the fly" ATC; center distance between tools: 104 mm (4.13"); max. tool dia.; 300 mm (11.18"); max. tool weight/tool: 8 kG (17.6 Lbs). -- Operator InterfacePC Front-End: SCMI "Xilog MAESTRO" + "eye-M" + Windows "10-IOT" 64-bit Operating System. 21" Full HD; LCD display; ergonomic industrial keyboard & mouse; central USB connection; RJ45 Ethernet port for possible link to an office PC. "Xilog MAESTRO" + "eye-M" Software offers full real time 2 - 3 D graphic interface for: Programming assistance & error diagnostics. -- Complete with:Tool Touch Off Probe; "TECPAD" handheld mobile console; 7" color display; "Pro Space" safety system with: Photocell barriers & bump stop; safety fences; 208 / 230 / 460 V Multi-tap autotransformer for various voltages. -- Actual Model: SCM - ACCORD 25 FX-MNOTE: No Vacuum pump is included with this machine

SCM - ACCORD 25 FX -M: CNC Machining Center (w/ATC) -- Specifications4' x 20' Aluminum "MATRIX" Grid 2-zone vacuum table. -- Working Capacity"X" Axis: 242.9" (6,170 mm); "Y" axis: 51.9" (1,320 mm); "Z" axis stroke: 17.3" (440 mm); 9.8" (250 mm) max. material thickness. -- Positioning Speed"X" & "Y" Axis: 197 FPM (60 MPM); "Z" axis is 82 FPM (25 MPM).Movement is controlled by: AC Brushless motors; YASKAWA drives; high precision rack & pinion system for: "X" & "Y"; precision ball screw for "Z" axis.Working unit travels on Prismatic guideways & sliding blocks with: Peloaded recirculating balls; NC controlled automatic lubrication system. -- Worktable"FX-MATIC" Aluminum "MATRIX" Grid 2-zone vacuum table with: (6) Adjustable pneumatic pop up reference stops; can be positioned on the perimeter of the worktable. -- Boring Unit3 HP (2.2 kW); Boring Block with: (8) Independent Vertical units; variable speed: 2,000 - 8,000 RPM with: (4) Bits in "X" axis & (4) bits in "Y" axis.(1) NC Controlled "X" Grooving saw: Max. 125 mm dia. blade.(4) Horizontal Boring units with: (2 + 2) in "X" axis; (2 + 2) in "Y" axis. -- Machining Units(1) 16 HP (12 kW) Electrospindle router with: HSK F63 Adaptor; rotation speed: 600 - 24,000 RPM.Constant torque achieved: 12,000 RPM; Router controlled by:12 kW Inverter for stepless speed & rapid shutdown rotation.(1) Rapid 16-position ATC plate mounted at the back of the "Y" axis carriage; "on the fly" ATC; center distance between tools: 104 mm (4.13"); max. tool dia.: 300 mm (11.18"); max. tool weight/tool: 8 kG (17.6 Lbs). -- Operator InterfacePC Front with: SCMI "Xilog MAESTRO" + "eye-M" + Windows "10-IOT" 64-bit Operating System. 21" Full HD, LCD Display; ergonomic industrial keyboard & mouse; central USB connection; RJ45 Ethernet port for possible link to an office PC. "Xilog MAESTRO" + "eye-M" software offers full real-time 2 - 3 D graphic interface for programming assistance & error diagnostics. -- Complete with:Tool Touch Off Probe; "TECPAD" handheld mobile console with: 7" Color display; "Pro-Space" safety system with: photocell barriers & bumpstop; safety fences; 208 / 230 / 460 V Multitap autotransformer for various voltages. -- Actual Model: SCM ACCORD 25 FX-MNOTE: No Vacuum pump is included with this machine.