Northfield For Sale

Ironwood Stiles Shaper Model FX750 230V/460V 3ph

IRONWOOD FX 750 SINGLE SPINDLE SHAPER WITH FEEDER1-1/4" Spindle Shaper, (6) variable speeds from 3,000 - 8,000 RPM, 7-1/2 HP 3-Phase straight 230 Volt motor.Features fine adjustment aluminum segmented finger fence which can be easily adjusted to fit to cutter size.Features:- 1-¼" interchangeable spindle, but can also be fitted with ½", ¾", 1", 30 mm and 35 mm sizes (additional sizes not included)- Vertical Spindle Stroke 7-1/16"; (180 mm) and 7-1/16"; (180 mm) Max. Tool Diameter (Below Table).- Electronic spindle brake- Forward and reverse spindle rotation with a directional indicator light to ensure safe climb-cutting operations- Raised and lowering of the spindle is adjusted by a precision graduated handwheel read via digital indicator- Spindle rotation controls with direction indicator light- Spindle speed indicator light indicates current RPM.INCLUDES: STEFF 4 Roll, variable speed feeder (10 to 60 FPM)!

IST (Industrial Surface Technologies) - AW 80, ...Industrial Washer with vibration.ISTpure's Stir Wash Tanks are designed to clean complex parts with an adjustable stirring platform for up to 100 stirrings per minute.Parts washers by stirring are very effective in thoroughly cleaning the surface and interior cavities of parts or batches of parts of any size.Simply load the parts into the tank through the opening in the top, set the cycle time and agitation speed Specifications: -- Tank capacity: 80 gallons -- Stirring System: Self-cleaning stirring platform with top loading that facilitates loading/unloading operations -- Adjustable Stirring Speed: Ranges from 0 to 100 stirrings per minute -- Pneumatic System: Operates at 120 psi pressure -- Inner tub made entirely of stainless steel components -- Included Attachment: Hand Wash Brush with Continuous Flow -- Standard Pump: Electric Motor -- Fluid Capacity 80 gallons -- Fluid Level 12" 17 1/2" -- Load Capacity 250 lbs 750 lbs --Overall Dimensions (D x W x H) 33" x 51 1/2" x 66 1/2" -- Interior Dimensions (D x W x H) 27 1/4" x 44 1/2" x 28" -- Tub Dimensions (D x W) 17 1/2" x 41 1/2" 27 3/4" X 54" -- Shipping Weight 556 lbs -- Compressed air required 8 cfm@ 120 p

IST (Industrial Surface Technologies) - PW 4, ...Industrial Pail Washer.Industrial Pail Washer is designed to wash the interior & exterior of open pails ranging from 1/4 to 5 gallons in size or other types of containers.An optional potholder can be used to hold smaller containers in place during washing. The PW is fully pneumatic, features all explosion proof components, and can be located in Class I, Division I hazardous areas. -- Heavy-Duty PW2 to PW12 solvent washers are made of industrial quality painted steel for durable use and trouble-free. An optional stainless steel finish is available to resist rusting and solvent spillsSpecifications: -- Capacity: (4) x 5 Gallons/19 Liter. -- Pump capacity: 46.2 GPM. -- Air Input: 75-100 PSI. -- Air Consumption: 40 CFM. -- OAL 67" x 45 1/2" x 72 3/8". -- Weight : 650 Lbs.

ITALPRESSE SP/1-A SPECIAL CASE CLAMP (AUTOMATIC FEED THROUGH): -- Specifications:Case goods capacity: 92" (2,340 mm) max. & 12" (300 mm) min. length; 48" (1,220 mm) max. & 10" (250 mm) min. height, 27.5" (700 mm) max. width. -- 10' (3,500 mm) Infeed belt conveyor, 14' (4,267 mm) overall belt length inside clamp & infeed, standard belt width 27.5" (700 mm); Feed speed 53 FPM with 0.5 HP drive. -- Complete automatic reading of the case size, fast approach action to reduce clamp cycle, (1) scissor on top & (1) scissor on each end close & clamp the case. -- Hydraulic actuated scissors with adjustable pressure up to 5,000 lbs, 3 KW hydraulic pump motor. -- Bottom & lateral intermediate locating bars from the top with pneumatic squaring; Intermediate side bars have electronic height positioning and are covered with PVC to prevent unwanted scratches. -- Clamp cycle is automatic with choice of three cycles (Manual, Semi-Auto & Automatic). Safety grid from rear and (6) electronic eyes from the front.

Italpress Matrix membrane-less press. See photos for specifications. Heating platen dimensions................................ 1,450 x 2,800 mm (57" x 110") Maximum useful lamination area........................1,250 x 2,600 mm (49" x 102") Maximum work piece thickness ......................... 43 mm (1.7") PVC foil width...................................................... 1,420 -1,450 mm (55.9" - 57") Maximum laminating pressure..............................200 metric tons (220 US tons) Maximum platen temperature................................ 150° C (302° F)

ITALPRESSE XL/6 30-13 120T Veneer Hot Press:Platen dimension: 3,000 mm x 1,300 mm (118" x 51"); Design allows loading from all (4) sides. -- 350 mm (13.8") Max. single daylight opening with infinitely variable stroke adjustment. -- (6) Hydraulic 85 mm dia. Chromium Plated upstroke cylinders. -- 120 Metric tons total pressure; 2,2 kW (3 HP) Hydraulic pump motor, dual stage & speed w/automatic pressure re-adjustment. -- Features a rack & pinion guide system made of self-lubricating material insures parallel closing of the platens. Equipped with: -- Patented, electrically heated platens w/automatic temperature adjustment; integrated electric heating system can heat up to 120°C max. platen temperature. Operating temperature 90°C. Power requirement 19 kW (25 HP). -- Manual open & close or automatic open with adjustable cycle timer. -- Perimeter safety stop wire on all (4) sides of press, and safety lockout for maintenance; safety circuit with two-hand operation. -- Construction: Heavy I-beam, welded steel frame; cylinders have chromium plated steel pistons with Teflon bronze guides in cylinder.

ITALPRESSE R4/130 Top Glue Spreader with 51" working width, -- max. 4" opening, 9" dia. grooved at 13 grooves per inch rubber spreading rolls, -- Rubberized doctor roll 7" diameter -- 65 FPM feed speed, 0.5 HP feed drive.

ITALPRESSE R4/160 Top & Bottom Glue Spreader Specifications: -- 63" working width, max. 3.5" opening, 7-1/4" dia. grooved rubber spreading rolls, -- 65 FPM feed speed, 0.5 HP feed drive.Also included: -- 1 New set of glue roller top/bottom.

J & P MACHINE 4 RSDC Pocket Hole Boring Machine TroughfeedThe pocket hole grooving and boring machine is ideal for making frames in kitchen, furniture and similar industries.The loading hopper magazine holds 25 pieces of 3/4″ thick material.This machine operates automatically by feeding, stopping, clamping, grooving and boring the material in one continuous operation.Specifications: -- Fast setup for grooving and boring with precision mechanical indicators to the accuracy of 1/10 mm. -- (4) high frequency router heads with drilling -- Closes to a minimum of 7″ --Opens to a maximum of 48″ --Minimum width 1½"; --Maximum width 6″ -- One or two grooves per side can be selected -- High-frequency motors with ½"; collets, adjustable from 12,000-18,000 rpm with electronic inverter -- PLC controls -- Precision linear bearings in open and closing base -- Produces approximately 10 – 15 pieces per minute -- Requires one operator -- 440 volts 3 phase -- 90 psi air required -- Dust collector hoods -- Dimensions 90″ long x 36″ wide x 55″ high -- Weight approx. 2000 lbs Also included: -- Dust hood (spider type)

J & P MACHINES - 6V2HD2GC: Boring Machiner (Feed Through, Drawer Parts) -- SpecificationsDrawer part Boring Machine is ideal for small to medium size production: Drills approx. 15 parts/minute; 12" min. working length; 28" max. working length; 2" min. working width; 28" max. working width; hopper loading/belt feeding magazine for automatic (1-man) operation. -- (2) Horizontal boring units with: 5-Spindle drilling chucks on 32 mm centers; ea. with 2 HP - 3,600 RPM motors; (3) vertical boring units with: 5-Spindle drilling chucks on 32 mm centers; ea. with 2 HP - 3,600 RPM motors. -- Drilling heads travel on linear guides with: Manual digital counter adjustments;, manual digital counter boring depth adjustment; PLC control for cycle functions of the machine. -- Machine requires 100 PSI Air pressure; dimensions are approx. 55" long x 34" wide x 58" high; weight is approx. 1,300 Lbs.

125 HP 460 Volt 28” x 44” inlet 7” x 40” outlet hopper included as pictured

JENKINS - JSM, NC Controlled Shaper & MortiserNC Controlled with: (1) Shaper head with ATC (18) tools, (1) tenon head, and (1) mortising head.Machine Specifications: -- Total X-travel: 122". -- Y-Axis (useful zone-1 only): 8". -- Min. length rail: 4". -- Max. length rail (Zone 2, 3 only): 96". -- Min. width rail: 1-1/4". -- Max. width rail: 12". -- Min. stock thickness: 1/2". -- Max. stock thickness: 2-1/4". -- Max. arch height (Zone 1 only): 6".Spindles: -- (1) 10 HP - 12,000 RPM non-tilting Cope spindle. -- (1) 10 HP - 18,000 RPM non-tilting high-speed Tenon spindle. -- (1) 5 HP - 18,000 RPM non-tilting, high-speed Mortise spindle. -- Tool Changer Capacity: (18) Tools.Controls: -- Industrial PC: Base powered by NEXCOM PEAK "760VL2" all-in-one computer card, industrial-grade computer chassis, LCD color touchscreen. -- YASKAWA Model "V1000": Adjustable AC frequency drives. -- ALLEN-BRADLEY: AC Servo Plus drive model "Ultra 3000".Over all dimensions: -- 16-1/2' Length. -- 120" Width. -- Floor-to-top guarding: 55". -- Floor to tabletop: 37-1/2".

JT9-414483 Blade speed 82 - 330 fpm Blade 1/8 - 1/2” Motor 1 HP, 115/230V, 1Ph Dimensions 34 x 24 x 68” Table height 39” 20 x 20 Throat 14” Weight 634#

JET EHVS-80 6"; x 89" Non-Oscillating Horizontal/Vertical Edge SanderSpecifications: -- Table size 12-1/2"; x 37"; x 3/4"; Thick, Table tilt 0° - 90°. -- Platen size 7" x 34". -- Belt speed 3,900 SFPM.Equipped with: -- 6" x 89" Abrasive belt. -- 1-1/2 HP 3,600 RPM Direct drive motor.Palletized Dimensions: 50" x 31" x 44" H.

JET EHVS-80 EDGE SANDER (NON-OSCILLATING)(Single-Phase) ---Price Negotiable---Make an Offer!--- - 6” x 89" Non-Oscillating Horizontal/Vertical Edge Sander - Table size 12-1/2” x 37” x 3/4” Thick, Table tilt 0° - 90° - Platen size 7" x 34" - Belt speed 3,900 SFPM - 6" x 89" Abrasive belt - 1-1/2 HP 3,600 RPM Direct drive motor - Palletized Dimensions: 50" x 31" x 44" H

JLT CLAMPS 717A-DC Cabinet Door Clamp:Pneumatically operated Cabinet Door Clamp to square & clamp door in (1) Second. -- 26" Front-to-back x 62" left-to-right clamping capacity. -- Single row door clamp with (1) horizontal pneumatic clamp & (2) vertical pneumatic clamps. -- Special mount on a 30° angle for ease of loading & less operator fatigue. -- (3) Large diaphragm cylinders for quick clamping pressure with single lever operation. -- 40 PSI Air pressure to produce 500 Lbs of force on each clamp. -- Shelf to hold the pieces of the frame before pressing on all squaring components. -- 40 Sq. ft. floor space requirement.(Replaces: #79K-6-DC)

JLT CLAMPS 717C-CHBB Double Door Miter ClampAccurately clamp, square and adjust your miter joints with JLT large miter double door clamp. The “CH Big Boy"; Door Clamp has quick changeovers, protects MDF doors, has accurate corner pressure adjustment and with removable center bars. Specifications: -- Dial regulators: “Dial"; pressure A, B, C, D IN or OUT for adjustment of corners. -- Includes (2) vertical and (2) horizontal clamps. -- Maximum capacity: 38"; W x 96"; L. -- Installed center bar: (2) 30";W x 46";L. -- For use on stile and rail doors as well. -- Single lever valve air activation.

JLT 717C-DC Cabinet Door Clamp:Pneumatically operated Cabinet Door Clamp to square & clamp door in (1) Second. -- 26" Front-to-back x 62" left-to-right clamping capacity. -- Single row door clamp with (1) horizontal pneumatic clamp & (2) vertical pneumatic clamps. -- Special mount on a 30° angle for ease of loading & less operator fatigue. -- (3) Large diaphragm cylinders for quick clamping pressure with single lever operation. -- 40 PSI Air pressure to produce 500 Lbs of force on each clamp. -- Shelf to hold the pieces of the frame before pressing on all squaring components. -- 40 Sq. ft. floor space requirement.(Replaces: #717A-DC)

JLT CLAMPS 717C-DDC CLAMP, PANEL AND DOOR.Pneumatically operated Cabinet Door Clamp to square & clamp a door in (1) Sec. -- 38" Front-to-back x 98" left-to-right clamping capacity. -- Single row 2-station Door Clamp with (2) horizontal pneumatic clamps and (4) vertical pneumatic clamps. -- Special mount on a 30° angle for ease of loading & less operator fatigue. -- (6) Large diaphragm cylinders for quick clamping pressure with single-lever operation. -- 40 PSI Air pressure to produce 500 Lbs of force on each clamp. -- Shelf to hold the pieces of the frame before pressing for all squaring components. -- 60 Sq/ft footprint.(Replaces #717A-DDC)