Panel Saws For Sale

HOLZMA PROFIMAT HPL 500 38/16 REAR LOAD, AUTOMATIC PANEL SAW: -- Specifications: 149.6" (3,800 mm) Cutting length & pull-back; 6.7" (170 mm) max. main blade projection; 40 HP (29.8 kW) Main & 3 HP (2.2 kW) scoring motor. -- Saw carriage: Infinitely variable speed from 0 - 492 FPM (0 - 150 MPM), constant return of 492 FPM (150 MPM).Carriage is electronically & automatically controlled (cutting height & length) through the CADmatic according to the material/program being processed."Power-Loc" quick change system for fast and easy saw blade change.NC Controlled scoring saw adjustment from the control panel during operation -- Pusher Fence:Rack & pinion digital drives with AC Servos on both sides, forward speed 295 FPM (90 MPM), return speed 295 FPM (90 MPM).(7) Material clamps which open up to 6.7" (170 mm): (3) Standard clamps with two fingers & (4) clamps with one finger.(4) Trimming rakes for thin strips/scrap removal are attached at the clamps. -- Operator Interface:HOLZMA "Power Touch Control" IPC multi-tasking controller with Windows "7 PRO" + "CADmatic 4.0 PRACTIVE" operating system;Intel i5 Dual-core Processor, Intel HD graphics card, 4GB RAM, SATA 2-250GB hard drive, (6) USB ports, (1) serial port, ATI/DVI video port, Standard industrial keyboard connection,21.5" LCD "Touch-Screen" monitor with real-time moving 2D & 3D graphics (displays cutting dimensions & error diagnostic); virtually unlimited cutting dimension memory.(2) Ethernet 10/100 interface connections; downloading from office PC is possible. -- Rear of machine: Profile rails & "Combi-rollers" at 50 mm centers; (2) integrated front & cross-aligning units before cutting to prevent off-set panels within the same book. -- Front of machine: (3) Air flotation tables 85" x 31.5" (2,160 x 800 mm) with (1) central blower unit. -- Rear Lift Table:7-Ton (14,000 LBS), 4-Column electro-hydraulic powered rear lift table running lengthwise with fork cut-outs, 150" x 63" (3,800 x 1,600 mm) capacity. Powered rollers are 4.2" (107 mm) dia x 7.79" (198 mm) spacing, 39 FPM (12 MPM) infeed/outfeed speed; Feeding material from (3) sides is possible with additional roller conveyors.22" (560 mm) Max. bunk height from floor level; 30.7" (780 mm) max. bunk height with a pit or risers; -- Complete With: Holzma's Unique "EcoPlus" System offers energy savings up to 20%; Includes Standby button & IE3 energy efficiency Motors rating.Angular cross-cut fence; Automatic side pressure device integrated into the saw carriage for cross-cutting, the machine cuts left to right to the cross-cut fence.Front & rear forks electronically & automatically controlled through the CADmatic according to the material/program being processed.Min. side aligning dimension 0" (0 mm), max. side aligning dimension 149" (3,800 mm)."Power-Loc" quick blade change system for main/scoring blades. -- Options Include: (1) Non-Powered in/out-feed staging conveyor with fork cut-outs as pictured. Micro In-feed for thin an

Holzma HPL11 Rear Load Panel Saw Still under power. Ready to be removed the end of January 2024

Holzma OPT.HpPS81/38 Panel Saw

HOLZMA - HPP 380 32/32: Front Load Automatic Panel SawSpecifications -- 126" (3,200 mm) Rip cutting capacity & pull back; 3.74" (95 mm) saw blade projection.18 HP (13.5 kW) Main saw motor and 3 HP (2.2 kW) scoring motor; scoring saw adjustment via "CADMATIC" control. -- Saw CarriageVariable saw carriage travel speed from: 16 - 426 FPM (5 - 130 MPM); constant return: 426 FPM (130 MPM). -- Pusher FenceElectronically controlled overhead program fence; equipped with: (6) Clamps that open up to 100 mm (3.9").Rack & Pinion driven on both sides; forward speed: 262 FPM (80 MPM); return speed: 262 FPM (80 MPM). -- Operator InterfaceHOLZMA Power Control with "CADMATIC" + "Windows XP" Operating System; virtually unlimited cutting dimensions memory.TFT 17" Flat Screen monitor, REAL-TIME moving graphics; panel grooving & numeric display.Industrial keyboard; 1.44 MB Floppy & DVD R/W drives; capable of online operation via RS 232 or USB port for possible link to an office PC. -- Complete with:Automatic "CENTRIC" side aligner with front & rear forks; holding ripped strips squarely against the right-angle fence.(3) Front air flotation tables; 67" x 25" (1.700 mm x 650 mm). Rear support rails with non-marking roller modules. -- Options include:Label Printer as pictured & label printing software -- Actual model is HOLZMA HPP 380 32/32.

HOLZMA - HPP 350 38/38: Front Load Automatic Panel Saw -- Specifications149.6" (3,800 mm) Cut length; 145.7" (3,700 mm) pull back; 3" (80 mm) saw blade projection. 18 HP (13.5 kW) Main saw motor; 3 HP (2.2 kW) scoring motor; scoring saw adjustment is from the "CADMATIC 4.0" control. -- Saw CarriageTravel speed: 16 - 492 FPM (5 - 150 MPM); constant return 492 FPM (150 MPM). -- Pusher FenceOverhead program fence with: (7) Gripper clamps; clamps open up to 90 mm (3-1/2"); rack & pinion drive on both sides.Forward speed: 82 to 295 FPM (24 - 90 MPM); return speed: 295 FPM (90 MPM). -- Operator InterfaceHOLZMA "Power Control 22" with: "CADMATIC 4.0 PROFESSIONAL" + "Windows XP" operating system. Virtually unlimited cutting dimensions memory.TFT 19" flat Touchscreen monitor, REAL-TIME moving graphics; panel grooving & numeric display.Industrial keyboard; 1.44 MB Floppy & CD ROM drives; capable of online operation via RS 232 or USB port for possible link to office PC. -- Complete with: Automatic "CENTRIC" side aligner with front & rear forks holding ripped strips squarely against the right angle fence.(3) Front air floatation tables: 85" x 31.-1/2 (2,160 mm x 800 mm). -- Options Include:Label Printer as pictured. -- Actual model - HOLZMA HPP 350 38/38.

HOLZMA - HPP 350 31/31: Front Load, Automatic Panel Saw -- Specifications122" (3,100 mm) Cut length; 122" (3,100 mm) pull back; 3" (80 mm) saw blade projection.18 HP (13.5 kW) Main saw motor; 3 HP (2.2 kW) scoring motor; scoring saw adjustment from the "CADMATIC 4.0" control. -- Saw CarriageTravel speed: 16 - 426 FPM (5 - 130 MPM); Constant return: 426 FPM (130 MPM). -- Pusher FenceElectronically controlled overhead program fence with: (6) Gripper clamps; clamps open up to 90 mm (3-1/2").Rack & Pinion drive on both sides; forward speed: 82 to 262 FPM (24 - 80 MPM); Return speed: 262 FPM (80 MPM). -- Operator InterfaceHOLZMA Power Control with: "CADMATIC 4.0" + "Windows XP" Operating System; virtually unlimited cutting dimensions memory.17" TFT Flat screen monitor; REAL-TIME moving graphics; panel grooving & numeric display.Industrial keyboard, 1.44 MB Floppy & DVD R/W drives; capable of online operation via RS 232 or USB port for possible link to office PC. -- Complete with: Automatic "CENTRIC" side aligner with: Front & rear forks holding ripped strips squarely against the right angle fence.(1) Front air floatation tables: 86" x 25" (2,160 mm x 650 mm); (2) front air floatation tables: 69" x 25" (1.760 mm x 650 mm); rear support rails with non-marking rollers. -- Options Include: ZEBRA "Z4M" Plus thermal label printer; (4) sets main/scoring blades; miscellaneous spare parts. -- Actual model: HOLZMA HPP 350 31/31

- SAW BLADE PROJECTION 3.2" - CUTTING LENGTH 126" - PROGRAM FENCE SPEED 295 ft/min - SAW CARRIAGE SPEED 492 ft/min - MAIN SAW MOTOR 18.5 HP - SCORING SAW MOTOR 3 HP - AVERAGE TOTAL AIR REQUIREMENT 4.3 cfm - COMPRESSED AIR REQUIREMENT 87 psi - EXTRACTION SYSTEM 1port 960 cfm - TOTAL CONNECTED LOAD 27 HP - WORKING HEIGHT 36" - AIR TABLES (3) 3/4 x 85"

HOLZMA HPP-11-32 OPTIMAT FRONT LOAD PANEL SAW:Specifications & features: 3,200 mm (126") Cutting length & pull-back behind the cutting line; 125 mm (4.9") saw blade projection; 30 HP (22.3 kW) main & 3 HP (2.2 kW) scoring motor. -- Variable saw carriage travel speed from 0 - 410 FPM (0 - 125 MPM), constant return of 410 FPM (125 MPM). -- Equipped with: Main blade 18" (450 mm) dia. and scoring blade 8" (200 mm dia.). -- Electronically controlled overhead pusher fence, rack & pinion drive on both sides by AC Servo motor; forward speed from 0 - 262 FPM (0 - 80 MPM), return speed of 262 FPM (80 MPM); equipped with (8) gripper clamps (open up to 4.7"). -- HOLZMA CADmatic Operating system; 15" color monitor (displays cutting dimensions); data input by keyboard or 1.44 MB floppy disk drive & downloading from office PC is possible. -- Control panel mounted on double swiveling arm for ergonomic positioning by the operator. -- Includes: Combi-rollers rear machine table with profile rails, rollers spaced at 50 mm centers; front with (3) air floatation tables, 85" x 26" (2,159 x 660 mm) each. -- Complete with: Angular square fence, automatic side aligner for crosscutting, (2) aligning devices on program fence; "Quick Saw Changing System" for main & scoring blade.

LAZZARI JUNO 3200 Sliding Table Saw with 126" Carriage TravelSpecifications: -- 13" Wide anodized aluminum sliding table w/lateral handle; 45° tilting arbor, 13-3/4" blade cap., 4-3/4" max. depth of cut, 49" rip cut cap. -- 9 HP Main motor, (3) cutting speeds 2,800 - 4,000 & 5,600 RPM, 1 HP - 8,500 RPM scoring unit with external fine adjustment, manual height & tilt adjustment, all point slide lock, on/off switches at end of sliding table. -- Complete with: -- Steel overarm protection guard, outfeed table extension, rip fence w/micro-adjust, crosscut fence with (3) flip stops. -- Includes: -- Three-phase transformer.

MAYER - PS 80P: Front Load, Automatic Panel Saw -- Specifications125.9" (3,200 mm) Cutting length & 122" (3,100 mm) pull back; 3.14" (80 mm) max. saw blade projection.12 HP (9 kW) Main saw motor; 320 mm main saw blade (3,800 RPM); 30 mm bore dia.; 1.5 HP (1.1 kW) score blade; 150 mm (8,680 RPM); 30 mm bore.Electronically controlled saw blade height adjustment; electronically controlled scoring blade horizontal (side-to-side) adjustment; "QUICK CHANGE" main & scoring blade system. -- Saw CarriageInfinitely variable forward cutting speed from: 5 - 262 FPM (1.5 - 80 MPM); constant return speed of: 262 FPM (80 MPM).Automatic cutting length adjustment; rack & pinion drive (not chain); AC Servo motor drives on the saw carriage with rack & pinion on hardened & ground guideways. -- Pusher FenceElectronically controlled overhead program fence; forward speed: 0 - 82 FPM (0 - 25 MPM); return speed:196 FPM (60 MPM); fence retracts: 122" (3,100 mm) Behind cutting line; AC Servo motor drives on the pusher fence with: Rack & Pinion on hardened & ground guideways.(6) Material gripper clamps open up to: 80 mm (3.1"); (3) Are closely spaced in crosscut area; the other (3) are at equal distance in rip cut area. -- Operator InterfaceMAYER "PC 5400" + Windows Operating System with: "REAL TIME" graphic display; 14" Color monitor mounted in a pivoting console.3-COM Network interface: 10/100 MBs with RF45 (TP) connection; (2) serial, (1) parallel interfaces, and SVGA graphics adapter; data input by keyboard or downloading from office PC is possible.PC 5400 Control System features: Automatic cutting length (material is scanned by sensor underneath the packet on the saw bed); electronically controlled automatic cutting height adjustment (also can be used for grooving by entering depth and width of groove at control).Automatic trim calculation: Constant display of remaining material in both axis during programming (eliminates need for operator calculations during programming). -- Complete with:Left angle crosscut fence: 78.7" (1,999 mm) long;, automatic crosscut aligner from: 3/4" - 47.2" (19 - 1,199 mm) with automatic presetting.Rear slotted pressure beam to minimize offcut; (3) front mounted air flotation tables: 79" x 24" (2,000 x 600 mm); segmented transparent plastic safety guards on front of pressure beam; wire mesh screen enclosure around rear machine table. -- Actual model - MAYER PS/80P/3200

Milwaukee 8" Panel Saw

(2) Saws sold as a pair Used for ripping 48" plywood and wafer board Saws can be adjusted anywhere on the shaft. Single Phase motors and variable speed drive motor, 2hp on main shaft.

Northtech NT 16R-10 Tilting Arbor Table Saw Infeed Roller 10 HP Motor

ORIGINAL 3691-03 Overhead Rail Panel SawSpecifications: -- Sturdy welded steel frame for saw head and beam arm; 7.5 HP motor; 1" dia. arbor; 1-3/8" long arbor; saw head with automatic electro-mechanical motor brake. -- 20" Max. blade dia.; 7" max. cutting depth @ 90°; 3-1/2" @ 45°; 62" long x 1", 4" & 6" thick max. crosscut cap. -- Complete with: -- 36" x 60" MDF table; heavy gauge steel base & legs for solid support. -- Includes: -- Upper & lower blade guards; magnetic starter and overload protection. -- Single-phase option available for;...$ 250.

ORIGINAL 3691-01-7 Overhead Rail Panel SawSpecifications: -- Sturdy welded steel frame for saw head and beam arm; 7.5 HP motor; 1" dia. arbor; 1-3/8" long arbor; saw head with automatic electro-mechanical motor brake. -- 20-1/2" Max. blade dia.; 8" max. cutting depth @ 90°; 4" @ 45°; 60" long x 1" max. crosscut cap. -- Complete with: -- 36" x 60" MDF table; heavy gauge steel base & legs for solid support. -- Includes: -- Upper & lower blade guards; magnetic starter and overload protection.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5x Entry-level Vertical panel saw for cutting various materials, straight & square to 1/32". Specifications: 3.25 HP Industrial Duty saw motor; 8" saw blade cap. with 1-3/4" max. material thickness; 64" crosscut (vertical position) with spring-loaded counterbalance system; unlimited rip-cut length cap. Features: Saw head rotates 90° to switch between rip and crosscut modes; adjustable scales on a 10' welded steel frame. Complete with: Zinc plated 1-3/4" guide tubes with "Nylatron" 4-roller bearing system; +/- 1/32" squaring or straight cutting tolerance. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SAFETY SPEED MFG 7400 Vertical Panel Saw: Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 2 HP single-phase Induction Saw Motor. -- 8" Blade cap. with 2-1/8" max. material thickness. -- 64" Crosscut (vertical position) with spring loaded counterbalance system. -- 120" Frame length with unlimited rip cap. -- 90° Saw head rotation to switch between cross- and rip cut modes. -- Triangulated welded steel frame with base mounted aluminum rollers. -- Midway fence for small part cutting. -- Adjustable scales on a 10' welded steel frame. -- Heavy extruded beams utilizing dual-V bearings. -- 0.005" Squaring or straight cutting tolerance. -- Optional material scoring attachment. 120" L x 46" W x 96" H (Crated Dimensions - 125" L x 51" W x 101" H). Machine pictured with Optional Wheels and Frame.Also available with 3 HP single-phase motor.

Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 3 HP Industrial-duty saw motor. -- 8" Blade cap. with 1-3/4" max. material thickness. -- 64" Crosscut (vertical position) with spring loaded counterbalance system. -- Unlimited rip capacity. -- 90° Saw head rotation to switch between cross- and rip cut modes. -- Triangulated welded steel frame with base mounted aluminum rollers. -- Option: Midway fence for small part cutting. -- Option: Adjustable scales on a 10' welded steel frame. -- Zinc plated 1-3/4" guide tubes with "Nylatron" 8-roller bearing system. -- ± 1/64" Squaring or straight cutting tolerance. -- 120" L x 36" W x 90" H (Crated Dimensions - 125" L x 41" W x 95" H). -- Machine pictured with Optional Wheels and Stand.

Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 3 HP Worm drive industrial duty saw motor. -- 8" Blade cap. with 1-3/4" max. material thickness. -- 74" Crosscut (vertical position) with spring loaded counterbalance system. -- Unlimited rip capacity. -- 90° Saw head rotation to switch between cross- and rip cut modes. -- Triangulated welded steel frame with base mounted aluminum rollers. -- Midway fence for small part cutting. -- Adjustable scales on a 10' welded steel frame. -- Zinc plated 1-3/4" guide tubes with "Nylatron" 8-roller bearing system. -- ± 1/64" Squaring or straight cutting tolerance. -- 120" L x 36" W x 98-1/2" H (Crated Dimensions - 125" L x 41" W x 103-1/2" H). -- Machine pictured with Optional Wheels and Stand.

SAFETY SPEED MANUFACTURING SR-5U Panel Saw and Router CombinationSpecifications: -- 10' Steel welded frame; 3.25 HP, 15 amp industrial duty saw motor; 3-1/4 HP, 11 amp Industrial duty router motor. -- 8" Blade cap. with 1-3/4" max. material thickness. -- 62" Crosscut (vertical position) with spring-loaded counterbalance system. -- Equipped with: -- MID-WAY FENCE system with stop as standard equipment which makes processing small panels more efficient; patented self-adjusting router carriage provides for a consistent depth of cut when routing. -- Features: -- Unlimited rip capacity; 90° saw head rotation to switch between rip and crosscut modes; adjustable vertical and horizontal rulers; chrome plated 1-3/4" guide tubes with 8 "Nylatron" roller bearing system; adjustable floating router head. -- Includes: -- (4) Material clamps; (2) blind dado stops. -- Can be changed from saw to router in less than a minute and has accuracy of 1/64" straight and square.Optional: -- "Gold", "Silver" and "Bronze" Packages are customized to maximize the benefits for building component shops and save when purchased together."Bronze Package": 5' Quick stop gauge, saw blade 840ATB1 for general purpose wood, fixed stand, wheels."Silver Package": 8' Quick stop gauge, dust collection kit (vacuum additional); saw blade 860ATB for fine wood, fixed stand, wheels."Gold Package": Mid-way fence, 8' quick stop gauge, saw blade 860NRATB for melamine, veneer and laminates, fixed stand, wheels.Other Options available: Extensions, Stop bar gauge, mid-way fence; flip stops, dust hood and hose kit, dust vacuum system (1 HP or 2-1/4 HP), hold down bar, specialty saw blades and router bits.Contact Product Manager for prices on optional equipment. -- 120" L x 36" W x 90" H (Crated Dimensions - 125" L x 41" W x 95" H).