Pallet Equipment For Sale

Miner 4” Edger

MORGAN "3-Head" Multi Blade trim saw: -- Equiped with:(3) 10 HP motors, 10'capacity 5'6" thick with Disconnects & Controls

Morgan 6' Pallet stacker

Morgan In Line Deduster S/N 061495037

Morgan In Line Deduster

10 HP | 230/460 volts

Mosley Resaw needs attention . Power feed. 3phase $2,000 Pasadena, Tx location. Rob

Nailmate Nailer. 48x50 Pallets. Located in WI. #C924

N&A Air pop up trim saw

Newman Chamfering Machine

Newman KF-24 Gang Rip with 100HP Electric Motor

Heavy Duty Newman KM-1 Single Head Notcher w/ motor & starter box, w/ indexing head that will notch to unlimited length (3 ph, air cylinder needs rebuilt), Ref #155 Call Rachel 931-797-6284

Newman KM-16 Overhead 5 Head Trim Saw

Newman KM-16 6 head trim saw, hyd drive, includes 2 belt conveyors, all controls, ready for production

2007 | 14,075hrs

1999 | Propane

Northtech FR-200 Frame SawSpecifications: -- Saw capacity of 6" width x 8" vertical capacity. -- Minimum working 2"; high X 12"; long. -- Main drive motor to saw frame is 30HP 3PH, wired 460 --V servo drive system to feed works is 1/4HP 3PH, --Blower to saw frame rack for added cleaning value is 3HP 3PH, -- Body of frame saw is (2) sections allowing for fast access to the saw frame, -- Saw blade speed is fixed at 550RPM, -- Dust extraction requires min 3000 CFM and is arranged with (4) 5" ports, -- Blade size is standard with 500mm L x 40mm W x 0.9mm body in stellite or TCT tip,Equipped with & Features -- Digital electronic oiling system provides proper lubrication to the saw frame guides -- Vertical rail system which allows optimum cooling and long term durability, -- (4) guide blocks are thermo- censored to allow auto shut-off of machine should possible heat buildup occur.Machine dimensions 122"; L X 40"; WX, 79"; H weight 7100 lbs. Machine was new in 2007.

350 Pallets / 6-8 Cords | 480V | 2023 | BTUh 800,000 | Dimensions 40' L x 8' W x 9' 6" H Drying Time: Summer - Drying: 2 - 3 Days / Heat Treating: 2 - 4 Hours Winter - Drying: 3 - 5 Days / Heat Treating: 3 - 6 Hours

OGAM - PO-340, ...Dip Chain Gang Rip Saw Specifications: -- 75 HP TEFC Motor, dip chain feed with overhead arbor. -- 4.3"; x 13.3"; Cut capacity. -- 16" Max. blade diameter. -- Power rise and fall. -- 70 mm dia. arbor. -- 2 HP Variable feed speed up to 115 FPM.Equipped with & Features: -- Automatic chain oiler. -- (3) Sets antikickback fingers. -- Adjustable infeed fence. -- Motor load meter. -- Many new saw blades.

OGAM MODEL PO-340 DIP CHAIN GANG RIPSAW ( THis is a Parts machine only )Specifications: -- 60 HP arbor motor, dip chain feed with overhead arbor, 13-3/8" (340 mm) max. rip cap. (between saw blades), 12-5/8" chain width. -- 9-13/16" Mn. to 13-7/8" max. blade dia., 4-3/4" max. depth of cut (manual raise and lower of the spindle), 70 mm dia. arbor runs @ 4,200 RPM; min. board length 19-3/4" (without short stock feed plate-see photo). -- Variable speed belted feed motor 20 to 100 FPM (approximate).Note From Seller: Ogam Gang Rip Saw. 60 HP motor 230/460. I don’t know much about this machine. Bought it used but haven’t been able to hook it up due to our current electrical service. The person I bought it from says it ran well when taken out of service. Can load on a truck.