Pallet Equipment For Sale

New 2024 UpSTAK Board Stacker machine for sale. Includes unscrambler, 7.5HP Motor, 15 layers per minute package, 7' Outfeed, and HMI controls. Wired for 480V. READY TO SHIP. CLICK ON VIDEO TO SEE MACHINE UP CLOSE.

RESAW-RM6X6 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -1" Blade - 10 HP Motor (220/1/60 TEFC) - Completely Prewired for 220V Single Phase - Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - Mounted at Operators Station - 39 FLA -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs

6x8 Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Operator Return Table - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 84” L, 90” W, 48” H - Approx. Weight: 1400 lbs 6x8 Slave Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Self- contained Hydraulic System Runs off First Saw - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 60” L, 90” W, 48” H - Approx. Weight: 1340 lbs - (2) 10 HP Motors (220/1/60 TEFC) 2 HEAD Resaw Control Panel - 220V Line Voltage (Single Phase) - 16" Tall X 16" Wide Enclosure (UL Type 1,3R,4,12) - 120V Control Voltage - Service disconnect in panel door - (2) 10HP 220V Motor starters, breaker w/OL - (2) Start/ Stop buttons for each motor w/ legend plates (Head 1, Head 2) - (1) Emergency Stop Button w/ legend plate- Completely for 220V, Pre-wired Motor Starters with Start/ Stop Buttons and Circuit Overload Protection 5' Roller Case Section with Adjustable Legs - 16ga Rollers - 2 Leg Sets with Braces - Height Adjustable from 26" to 32" - Galvanized Finish (Not Painted)

2NXL Notcher, never used -480V -Standard Teeth -Dust Chutes -Startup Kit with new teeth TWIN NXL Pneumatic Notcher - (2) 12” Diameter X 9” Wide Index-able Notching Heads - 0"- 2-1/2" Tall Notch Capacity - Up to 6” Material Width, 4” Material Height (Other Heights Available), Up to 112” Material Length (longer available) - Production: Up to 1750 Stringers Per Hour - Center boot quick adjust from 14” to 18” Wide via Hand Crank - Center boot adjustable from 12.5" to 19.5" Wide via with additional setup - Can optionally be used as a single head notcher for other center boot widths - Dual 2" Bore Tie Rod Air Cylinders for Clamps & Table - Heavy Duty 3/8” Thick Steel Table Top - Twin Top Clamps - 1-1/4" Linear Bearing Slide Assemblies - Air System Includes: Dual Hand Safety Controls, Lockout Valve, and Regulator - Operating Height: 37” - Dimensions: 120” L, 60” W, 51” H - Approx. Weight: 2980 lbs

Used NXL Notcher -230V 3PH -Dust Chutes -Standard Teeth NXL Pneumatic Notcher - 12” Diameter X 9” Wide Index-able Notching Heads - 0" - 2-1/2" Tall Notch Capacity - Up to 6” Material Width, 4” Material Height, Up to 60” Material Width (longer available) - Production: Up to 800 Stringers Per Hour - Top Hold Down Clamp - Dual 2" Bore Tie Rod Air Cylinders for Clamps & Table - Heavy Duty 3/8” Thick Steel Table Top - 1-1/4" Linear Bearing Slide Assemblies - Air System Includes: Dual Hand Safety Controls, Lockout Valve, and Regulator - Operating Height: 37” - Dimensions: 60” L, 90” W, 50” H - Weight: 2000 lbs

April 2024 - Go Fast board deduster w/ side brushes, debur and board knocker, D3 Series 6" wide 1/4 - 2 1/2" thick boards, 5 HP 480 V (3) phase, 5 HP variable feed hydraulic self-contained, So new packing slip still attached, Ref #204, Contact Jackie Kittrell 931-698-3342

April 2024 - Go Fast MET-20 multi-end trim saw 44 FLA, 10 HP blade motors, 1 1/2 HP feed through motor VFD, includes 12" waste conveyor & 1/2 HP material take away, belt conveyor 12", 20" carbide tip saws - 2060 chain, material spec 12' long x 12" wide x 4 1/2" thick, mounted motor controls, Ref #204, Contact Jackie Kittrell 931-698-3342

2021 | 480V | Produces up to 800 Stringers Per Hour

3 Head | 6x8 Resaw Model | 480V

Yard Saw | UNK Year | 480V | 90" Usable Bar Length

8 foot bar 11HP electric motor 489 volt 3 phase

Hazeldine Chamfer Machine

Hazeldine Chamfer Machine

Chop Saw. This machine is a Hazeldine upright chop saw. Item #00708

Hazelthorn Chamfer Machine

Hazlethorn Pallet Notcher Model A10

Heartland Board End Trimmer

Hemco Sorter Line System includes: - Unscrambler - Board Singulator - Even end roll case - 34 Sling Bays - 10 Slot Bays - Stacker Outfeed - Trim Saw

2020 | 480V | 62" useable bar length

Holtec Stationary Package Saw