Hogs and Wood Grinders For Sale

HAMMEL 750D HAMMERMILL NEW IN 2019Approx 3,000 Hours --Hydraulic recycling machine with 2 slow running tool shafts --Suitable for Wood (Old wood, construction & demolition wood, rhizomes, green waste, pallets, cable drums) or Rubbish (Domestic waste, industrial and commercial waste) and Paper, paper rolls, aluminum profiles and balesAdvantages: --Increased performance for more throughput --low energy consumption --Very easy to maintain --User-friendly handling by IFM control --Better accessibility of the control panels --Low noise --Tilt funnel with increased inclination for optimum material flow --Mobile on a chain or semi-mobile on a hooklift

HUSTLER - FC-2, ...ScreenSpecifications: -- OD at the longest point: 104" -- Long at longest point: 122" -- Tall at the tallest point: 65"Equipped with: -- (2) Shutoff switches

Jeffrey 34WB Hammermill Hammer Hog S/N 11979, Top opening is 21" x 33", Bottom discharge, No drive, Includes 35" x 55" x 60" tall Hopper

Jeffrey Hammer Mill 30WB S/N 14168

Jeffrey waste grinder, 34" wide capacity, top feed/ bottom discharge, includes new set of hammers and screens, very good condition and ready to work

16" Used JMC MCINTYRE SHEARAn affordable efficient 407mm (16″) blade shear with enough power and speed to handle a wide variety of cutting tasksRobust, affordable, efficientBuilt originally for scrapyard use, the McIntyre 407 shear is robust enough to withstand the most difficult of working environments. It is now our most popular alligator shear with more than 2000 still in daily use worldwide. The McIntyre 407 is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 407 can also be used to cut ferrous metals.Technical DataMachine dimensions: 1590 x 712 x 1350mmBlade Length: 407mm / 16";Tip to tip opening: 225mm / 8.8″Shearing height: 931mm / 36.6";Weight with oil: 900kgOil capacity: 200 Litres / 44 GallonsNoise Level: 75 +/- 3dBACut control: Single Cut repeatingStandard ElectricalRequirements: 32A / 3ph / 380-415v / 50HzPower Rating: 7.5 kW / 10hpMotor speed: 1450 rpmMax system Pressure: 214 Bar / 3100 psiMax Shear force: 120 TonnesFully open cut speed: 11 dry cycle cuts per min40% Stroke cut speed: 28 dry cycle cuts per minCutting Capacity: 56mm (2";) Round Bar / 45mm (1.5";) Square Bar

50 HP JORDAN - MS4220: Dual Shaft Shredder with Infeed ConveyorSpecifications -- Overall length: 141". -- Overall width: 56". -- Overall height: 98". -- Cutting chamber size: 42" x 20". -- Hopper size: 1-1/2 - 2 Cubic yard. -- Cutter assembly height: 13-1/2". -- Motor horsepower: 50 HP. -- Approx chamber weight: 4,570 Lbs. MS-4220 is a most popular midrange Shredder with: Power to handle tougher jobs; cost that can fit into your demanding budget. MS-4220 can be used to Shred: Paper, plastic, passenger tires, carpet, and an many other materials. Shredder is designed with: Counterrotating dual speed shafts; cutting group continuously changes knife tip position. This helps the knives grab & pull through hard to hold materials. MS-4220 Industrial Shredder offers: Midsize chamber capacity; horsepower to handle many of the most demanding applications. For a cost-effective Shredder, this unit cannot be beat for volume reduction & material shredding. The MS-4220 Industrial Shredder is a "Workhorse."

KEESTRACK - Frontier: Portable ScreenerTechnical Specifications -- Capacity: Up to 600 ton. -- Weight: 30 Ton. -- Screen box (L x W): 4,500 x 1,800 mm. -- Feed hopper in HB450: 8 cbm. -- Hydraulic folding hopper for transport. -- Heavy-Duty Plate Apron Feeder: 3,560 x 1,300 mm. -- Loading height. Open back wall: 2,420 mm; half open back wall: 2,850 mm; closed back wall: 3,260 mm. -- Side loading length: 4,400 mm Screen box L x 4,500 W x 1,800 mm Hydraulic liftable screen box. -- Screen box can be set in several inclination: Standard walkway beside screen box; Standard Long Life. -- Grease: Interval every (250) Hrs. -- The 1st (2,500) Hrs of its life was used to screen mulch. The rest was used to screen concrete. Needs a starter, but we just wired a direct push button to it. Great shape: Has some surface rust but just cosmetic.New main belt & fines belt in the last (100) Hrs.

Kimwood Grinder with 200HP Electric Motor

LAMB 23x27 inch opening grinder with 150 HP motor, 1 3/8” screen and starter control. 460 volt 3-phase

MIZAR- 16" BLADES" Alligator Shear - IN STOCK -- Blade Length: 15,75 in (400 mm) -- Cutting Speed: 8-9 cuts/min. -- Cutting Force: 221.000 Lbs -- Pressure: 160 bars -- Motor: 7,5 kW -- Width: 36 in Length: 71 in Height: 59 in -- Weight: 2750 Lbs -- Electrical Components: Siemens -- 1 Year Warranty

MIZAR - 24" Blades: Alligator Shear - IN STOCK READY TO SHIP -- Blade Length: 24" (600 mm) -- Cutting Speed: (8 - 9) Cuts/Min. -- Motor: 7.5 kW. -- Width: 36"; length: 71"; Height: 59". -- Weight: 2,750 Lbs. -- Electrical Components: SIEMENS. -- 1-Year Warranty.

Horizontal feed machine, recently re-serviced with new anvils, bolts, and holders, plus a chute for underneath. In very good working condition and ready for use. Optional right-hand heavy gearbox also available. Make your offer today!

Montgomery waste grinder, 34" capacity, top-feed, includes feeding hopper, price includes going through shop, good working condition

Features 20" opening with top feed and bottom discharge. Feed mechanism requires some electrical work. Includes screen in working condition. Option to purchase an electric motor. Make your offer today!

MONTGOMERY BLO-HOG Top-Feed Wood GrinderSpecifications: -- 13" x 18-1/2" Top feed opening; 75 HP direct drive motor at 1,200 RPM. -- Unique cutting action involving stationary anvils positioned on the side of the machine with rotating teeth (hammers) that pass through rectangular pockets formed by these anvils. -- This positive cutting action between the teeth and anvils performs what amounts to the first particle-sizing function in a two stage process. -- The second sizing action occurs when the material cut by the action of the teeth against the anvils is directed downward and across a curved particle-sizing screen which fits underneath the rotating element. -- The machine is mounted on a elevated base providing ample room for discharge. -- Actual model is ER 18S315FHDL.

New shaft, left-hand, 3-15/16" bearing journals, crated. We originally built this shaft and shipped it to our customer for them to store as a spare in their warehouse. We later purchased it back after the mill closed.

Montgomery Model 26HD-HZF Horizontal-Feed Hog, s/n 1616, Rear Discharge with 13-1/2” I.D. flanged elbow and clean-out, 26” wide x 8” high infeed opening, 3-15/16” spherical roller bearings, screen with 1” holes and baffles, 4” x 30” flywheel on left side with guard cover, shaft guard cover on non-flywheel end; 100hp 1765rpm TEFC motor with slide base, v-belt drive and guard cover. Hog/motor package is approximately 9’ long x 6-1/2’ wide x 5’ high, and its weight is estimated to be about 9,000 pounds.

34HD-ER Top Feed/Bottom Discharge Hog, s/n 1606, 34” x 13” infeed opening, 4-7/16” spherical roller bearings, 6” x 36” oversized flywheel with guard cover, shaft guard cover on non-flywheel end, 4-groove 5V 28.3” driven sheave on hog; includes v-belt drive guard cover and v-belts. Hog is approximately 7’ long x 3-1/2’ wide x 4’ high, and it weighs about 8,000 pounds.