Pallet Equipment For Sale

Morgan Double Head Notcher Unscrambler lectrical: 480v, 60hz, 3ph This machine is equipped with a hydraulic unscrambler. Includes 5hp Hydraulic Pump. Unscrambler and the saw are able to handle wood planks 26”-70” long approx. Notcher is equipped with (2) 9.5” notching cutterheads. Each notching cutterhead has individual manual lateral adjustment controls. Each head is belt driven via dedicated 25hp motor. Includes control panel with push button controls. Includes side mounted electrical cabinet. Serial: 030102170

Morgan Deduster in good condition. Last used about 6 months ago without problems. Call 800-459-2148 for more info.

Nailmate Nailer. 48x50 Pallets. Located in WI. #C924

N&A Air pop up trim saw

Newman Chamfering Machine

Newman KF-24 Gang Rip with 100HP Electric Motor

Used Tilt Hoist and Infeed Deck | Used 5 Head KM-16 Trim Saw | Used Producto Resaw

Heavy Duty Newman KM-1 Single Head Notcher w/ motor & starter box, w/ indexing head that will notch to unlimited length (3 ph, air cylinder needs rebuilt), Ref #155 Call Rachel 931-797-6284

Newman KM-16 6 head trim saw, hyd drive, includes 2 belt conveyors, all controls, ready for production

Newman KM-16 Overhead 5 Head Trim Saw

2007 | 14,075hrs

1999 | Propane

Northtech FR-200 Frame SawSpecifications: -- Saw capacity of 6" width x 8" vertical capacity. -- Minimum working 2"; high X 12"; long. -- Main drive motor to saw frame is 30HP 3PH, wired 460 --V servo drive system to feed works is 1/4HP 3PH, --Blower to saw frame rack for added cleaning value is 3HP 3PH, -- Body of frame saw is (2) sections allowing for fast access to the saw frame, -- Saw blade speed is fixed at 550RPM, -- Dust extraction requires min 3000 CFM and is arranged with (4) 5" ports, -- Blade size is standard with 500mm L x 40mm W x 0.9mm body in stellite or TCT tip,Equipped with & Features -- Digital electronic oiling system provides proper lubrication to the saw frame guides -- Vertical rail system which allows optimum cooling and long term durability, -- (4) guide blocks are thermo- censored to allow auto shut-off of machine should possible heat buildup occur.Machine dimensions 122"; L X 40"; WX, 79"; H weight 7100 lbs. Machine was new in 2007.

350 Pallets / 6-8 Cords | 480V | 2023 | BTUh 800,000 | Dimensions 40' L x 8' W x 9' 6" H Drying Time: Summer - Drying: 2 - 3 Days / Heat Treating: 2 - 4 Hours Winter - Drying: 3 - 5 Days / Heat Treating: 3 - 6 Hours

OGAM MODEL PO-340 DIP CHAIN GANG RIPSAW ( THis is a Parts machine only )Specifications: -- 60 HP arbor motor, dip chain feed with overhead arbor, 13-3/8" (340 mm) max. rip cap. (between saw blades), 12-5/8" chain width. -- 9-13/16" Mn. to 13-7/8" max. blade dia., 4-3/4" max. depth of cut (manual raise and lower of the spindle), 70 mm dia. arbor runs @ 4,200 RPM; min. board length 19-3/4" (without short stock feed plate-see photo). -- Variable speed belted feed motor 20 to 100 FPM (approximate).Note From Seller: Ogam Gang Rip Saw. 60 HP motor 230/460. I don’t know much about this machine. Bought it used but haven’t been able to hook it up due to our current electrical service. The person I bought it from says it ran well when taken out of service. Can load on a truck.

OGAM - PO-340, ...Dip Chain Gang Rip Saw Specifications: -- 75 HP TEFC Motor, dip chain feed with overhead arbor. -- 4.3"; x 13.3"; Cut capacity. -- 16" Max. blade diameter. -- Power rise and fall. -- 70 mm dia. arbor. -- 2 HP Variable feed speed up to 115 FPM.Equipped with & Features: -- Automatic chain oiler. -- (3) Sets antikickback fingers. -- Adjustable infeed fence. -- Motor load meter. -- Many new saw blades.

Orion Shrink Wrap Machine #C865

Orion Shrink Wrap

(2) 14' 14-Strand Board Singulator Unscrambler

Pacific Trail Gas Yard Saw. #00869