Pallet Equipment For Sale

Approx. 1999 GAP 960 3 Stringer Nailer with Stacker

Gap 960 3 Stringer Pallet Nailing Machine S/N 99929

2023 | Lil' G2 Nailer | 48x48 | Comes with 10 HP Air Compressor

2005 | Stringer Feeder | 480v | Board Hoppers | Great Running Condition

480v | Setup for Stringers | Can be converted to Block Pallets

GBN Explorer Pallet Nailer

GBN 48" Block & Mat Assebly with Hydraulic Power Unit

GBN 48" Block & Mat Assembly with Hydraulic Power Unit.

GBN Excalibur Pallet Nailing Machine

GBN 48" Parts Machine with Hydraulic Power Unit.

PRICE REDUCED 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs 6x8 Slave Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Self- contained Hydraulic System Runs off First Saw - Easy Crank for Adjustable Blade Position - Top Mounted Powered Tire Hold Down Wheel - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 60” L, 90” W, 48” H - Approx. Weight: 1340 lbs Additional options included: -Air holdover -6” fence -1.25” blade and guides - (2) 15 HP Motors (230/480/3/60 TEFC) 2 HEAD Resaw Control Panel - 480V Line Voltage Location: Salem, MO

Go Fast Deduster with Hydraulic Power. Has not used in years. Selling to make room in work area. Cap 5"-6" width and 6' - 7' Length. Width of belt is about 5" - 6". Call 800-459-2148 for more info.

10HP Notchers available with 3 phase or single phase motors. Great for notching NEW wood stringers. The design is compact, low maintenance, and easy to operate. Notches up to 72" long material, extension kits are available. Profile Technology cutting heads. Units are typically in-stock. Manufactured in New London, WI. Dust Collection is recommended, but not required.

The Go Fast NXL Single Head Notcher is a compact, heavy duty, and SAFE machine for your notching needs. Notch new or recycled material or even 6” wide cants. A dual hand control check valve requires that the operator has both hands on the push buttons while the table is moving through the cutter. The cutter head is well guarded and never exposed to the operator. In addition to a front clamp, a top clamp is included to help hold the material down while it is being notched. Unfortunately many other notchers do not include this feature which results in you replacing more cutter tips and spending more money.

The Go Fast TS10 Trim Saw is a heavy duty and compact machine, perfect for trimming boards to size. The easy to use moveable length stops are quick to adjust and allow for multiple, simultaneous board sizes. SIMPLE, SAFE AND STURDY: The easy stop system makes it SIMPLE for the operator to cut boards to length. The operator can SAFELY cut boards without ever having to stand on the blade side of the machine or have their hands near rotating shafts and sprockets. STURDY is one thing Go Fast had in mind when making the TS10 Trimmers. Weighing approximately 1,600 LBS with 3X3 tubular framing, you can bet that these saws will be around for the long run!

NXL-M Single Head Notcher. 20HP motor, can notch 4 stringers at a time. Notches new or recycled material. Equipped with a pop-up guard. Table floats on linear bearings and takes minimal effort for the operator to move.

RESAW-RM6X6 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -1" Blade - 10 HP Motor (220/1/60 TEFC) - Completely Prewired for 220V Single Phase - Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - Mounted at Operators Station - 39 FLA -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs

GO FAST DD79 DEDUSTER High Speed Board Deduster 230V 3Ph

The Go Fast Deduster is the solution to sawdust left on boards. Material can be fed by hand or from an inline process into the machines hopper. An adjustable gate allows the rubber feed belt to pull the bottom board forward to the feed wheel and through the top and bottom rotating brushes. THE DIFFERENCE: There are several features that set the Go Fast DeDuster apart from the rest, and it all starts with the brush! Our side sweeping disc brushes sweep sideways, providing cleaner boards than traditional drum brushes. They also do not require an air collection. BOARD KNOCKER: Our famous board knocker system helps meter the boards through the machine one at a time. It breaks frozen and sticky boards apart and prevents 99% of jams!

The “Twin NXL” is a heavy-duty double head notcher designed to fill the gap between today's entry-level single head pneumatic notchers and high-end, expensive, auto-feed double head notchers. Notch new or recycled material or even 6" wide cants.