Pallet Nailer and Assembly Systems For Sale
Category
Pallet Nailer and Assembly Systems
46 Results Found
Also available NEW 15hp atlas copco screw compressor with air dryer and storage tank, all NEW equipment ready to go. The pallet machine is a PC 3 designed to build 3 or 4 stringer pallets as small as 48x48 and as large as 92x86. This machine includes a self stacker and an additional set of roller beds to discharge a stack on to. $92,500 for the pallet machine and $14,000 for the compressor with all components new and ready to go today! please give me a call if interested 706-599-3559
PALLET CHIEF II WITH DELUXE STACKER • Like New Pallet Chief PC2, Model # 6450. Sold As-Is, Where-Is. • Pallet Chief’s #1 selling model. • Purchased new in April 2016 (one owner). • Like new condition, well maintained, and ready for work immediately. • 1-Man operation and minimum setup time. • Always stored and operated inside. • Highly accurate nail placement, increased speed and productivity. • Includes: Nailing station, transfer table, deluxe stacker, and 10-foot accumulation table. • Can produce pallets sizes from 30 x 30" up to 64 x 50" with up to 4 stringers • Production capacity of 300-400 standard sized pallet per 8-hour shift. • Uses large coil nails for longer use between reloading. • Uses four (4) Heavy Duty pneumatic nail guns (CN70) mounted on a carriage. • Two (2) additional spare CN70 nail guns included. • Requires only 110v and 120psi air supply. • Includes six (6) sensor bars for up to 12 ready pallet configurations (2 per bar) • Sensor bars are easily changed and adjusted as needed. • Operator pulls the carriage forward, and it moves over adjustable pins linked to a sensor. The sensor activates the nail guns. • Assembly Station: -- Stringers are inserted into place by operator. Operator places bottom deck boards against adjustable indexing pins and activates nailing carriage. After nailing cycle is complete, operator flips pallet over. Indexing pins are then lowered for placement of top deck boards. After top deck boards are placed, nailing carriage is again activated. • Deluxe Stacker Station: High production deluxe stacker with fifteen (15) height cap. Assembled pallets are manually pulled from assembly station on back stroke of nailing carriage and onto infeed of stacker. -- Lifting fingers are retracted and lowered under pallet. Fingers then extend and lift stack of pallets. Process is repeated until capacity of stacker is reached. Stack is pushed onto a roll-out table and off-loaded with forklift (maximum 3 stacks).
This machine was removed from production about 3 years in working condition. Currently under power. Seller believes it to be about 10 years old. Set up for 30x42 3-stringer w/3 bottom & 6 top decks Production rate they did was about 250-275/day per 8hr shift Does not have all of the inline air filters & water traps. Seller does not use the bottom spacers Machine needs some tubing and minor parts to get the bottom pop-up spacers functional. 110V
Call for Price
Call for Price
Call for Price
Eagle 4 Stringer Pallet Nailing Machine 36'x 36" To 48"x 48". Polar Air 20HP Air Compressor w/ Matching Dryer & 2 Air Reciever Tanks.
Call for Price
2000 GBN Excalibur Pallet Nailing machine, making block pallets with it now. 3 stringer. 480 v. 3 phase. Serial # 2004
Call for Price
Call for Price
2001 GBN Excalibur Nailing Machine with a large customized hydraulic infeed conveyor, stacker, outfeed conveyor and repair station. Producing block pallets. 480 vac 3-Phase
Call for Price
This system produces approx 2,000 pallet per day with four men. System includes: Tipper, accumulator, two roll tracts, automated bar code reader, (5) automatic stackers Upgraded parts include: Electric motors, bearings, rollers, photo eyes, proximity switches, hydraulic hoses Includes: Pallet Track System by Innovative Data Systems
Call for Price
Magnum Cheetah Pallet Nailer, 3 Nailer Heads, Nail Hoppers, Automatic, Includes Automatic Stacker
2019 Pallet Chief IV with Deluxe Stacker Model 7060-3434 4 stringer MAX CN70PAL nail guns Transfer table Deluxe stacker Complete pallet nailing system Bought new in 2019
Call for Price
Call for Price
2021 Pallet Chief II with stacking table able to handle up to 22 pallets. include 6 cn95 max guns brand new which is about a 900.00 14 boxes of nails is about a 1100.00 value Owners manual and spare/extra nail placement guides. It is fully functional with no issues in brand new condition. This machine runs in 110 volts single phase and 90 psi. It is available for immediate pickup. 2000ish Pallet Chief II Fully functional - would recommend Pallet Chief's rebuild kit $1000 Runs in 110v single phase and 90 psi Has 22 pallet stacker also included
Pallet Chief II with Deluxe Stacker 4-Stringer System Palet size: 30"x30" up to 48"x48" Includes: (4) Max Nail Guns CN70PAL Deluxe stacker conveys finished pallets into stacks approximately (15) high and allows for up to (3) stacks of production before a forklift operator is needed to clear the roll out table. This allows for continuous pallet production as the ‘nailer’ never has to stop and provides flexibility for the forklift operator as it creates a window of time in which the machine can be unloaded rather than a ‘right now’ work stoppage event. Machine was used very little as our production needs turn out to be smaller quantities and more variable type work rather than large production runs of the same size.