Pallet Equipment For Sale

Pallet Chief Pallet Stacker

Also available NEW 15hp atlas copco screw compressor with air dryer and storage tank, all NEW equipment ready to go. The pallet machine is a PC 3 designed to build 3 or 4 stringer pallets as small as 48x48 and as large as 92x86. This machine includes a self stacker and an additional set of roller beds to discharge a stack on to. $92,500 for the pallet machine and $14,000 for the compressor with all components new and ready to go today! please give me a call if interested 706-599-3559

PALLET CHIEF II WITH DELUXE STACKER • Like New Pallet Chief PC2, Model # 6450. Sold As-Is, Where-Is. • Pallet Chief’s #1 selling model. • Purchased new in April 2016 (one owner). • Like new condition, well maintained, and ready for work immediately. • 1-Man operation and minimum setup time. • Always stored and operated inside. • Highly accurate nail placement, increased speed and productivity. • Includes: Nailing station, transfer table, deluxe stacker, and 10-foot accumulation table. • Can produce pallets sizes from 30 x 30" up to 64 x 50" with up to 4 stringers • Production capacity of 300-400 standard sized pallet per 8-hour shift. • Uses large coil nails for longer use between reloading. • Uses four (4) Heavy Duty pneumatic nail guns (CN70) mounted on a carriage. • Two (2) additional spare CN70 nail guns included. • Requires only 110v and 120psi air supply. • Includes six (6) sensor bars for up to 12 ready pallet configurations (2 per bar) • Sensor bars are easily changed and adjusted as needed. • Operator pulls the carriage forward, and it moves over adjustable pins linked to a sensor. The sensor activates the nail guns. • Assembly Station: -- Stringers are inserted into place by operator. Operator places bottom deck boards against adjustable indexing pins and activates nailing carriage. After nailing cycle is complete, operator flips pallet over. Indexing pins are then lowered for placement of top deck boards. After top deck boards are placed, nailing carriage is again activated. • Deluxe Stacker Station: High production deluxe stacker with fifteen (15) height cap. Assembled pallets are manually pulled from assembly station on back stroke of nailing carriage and onto infeed of stacker. -- Lifting fingers are retracted and lowered under pallet. Fingers then extend and lift stack of pallets. Process is repeated until capacity of stacker is reached. Stack is pushed onto a roll-out table and off-loaded with forklift (maximum 3 stacks).

Wired for 230V. Several upgrades over the years. Parts included in sale. Still in production averaging 520-600 pallets per day. Forth stringer pocket included and 8FT roller bed for stacks. Extra air tank is included. Guns are not included. Sold as is.

SCMI Beam Saw was functioning well when taken out 12 years ago, scoring saw, and some blades. Needs to go $3,500. 713-304-8544

Timberland deduster or can be used for an unscrambler

Timberland Deduster, drum type, excellent condition. Rob 713-304-8544

2022 Woodpecker Junior Nailing Machine NEW! NEVER UNCRATED! 4 Run holder. Electronic nail gun firing system includes 2 unique firing devices. Ability to build top and bottom or top only wing pallets. The Woodpecker Junior is an American made, highly efficient, single operator nailing machine. Many customers see the production of 500 or more pallets per day running the Woodpecker Junior with the available stacker. Standard size: 50” L x 56’’ W (maximum with 4 stringers) 24’’ L x 26’’ W (minimum with 3 stringers) Maximum Pallet Size: 50” L x 56” W, 4-Stringer, Woodpecker Junior Stacker with Powered Infeed and Discharge Conveyor, and 10’ Rollout Conveyor Standard Features & Benefits Include:, Steel Track, Rollers, and Heavy-Duty Channel Frame, Variable Electric Drive, 480V or 240V, Rear Pallet Push-Out to Optional Stacker, 2 Firing Systems:, (Auto-Board Sensor Firing System w/FPM Speed Meter, Slot Sensor Firing System)Top & Bottom Board Flushers, Quick Clamps Included for Nail Guns and Jig Adjustment, Boards Hold Downs and Double Air Clamps, Complete System Positive Lubrication System, Quick Adjuster on Right Jig, 4 - Nail Chutes, 1 - Firing Rail w/ Pins & Hardware, Machine Requirements: 1” air supply line with a minimum of 60 gallons of storage/accumulation within 10 feet of machine. 7 HP air compressor or larger to produce 28 CFM of clean, dry air.

Advanced Production Tools Hydraulic 4x6 Lift Table

Alvey Pallet Repair Conveyor Line 3 Strand w/Chain & Drive Electric

(2) 8' Round Tables w/ Hydraulic Drive

Deckmaster Lead Board Remover Good working condition

Baker Chamfer Machine

Baker Pallet De Stacker

Baker M4 in Line Deduster. S/N 96-231

1994 Baker Deduster, model BDD-O. 3 phase, electric. In good working order.

Baker resaw Model BPQ-O, S/N 01-337 w/ 15 HP motor w/ motor control, hydraulic drive and on-board hydraulic power pack, (ref #158) Call Ethan for more information 931-607-4738

Bob Hannah Board Chamfer

BrewCo B1600 from river city rapids- complete band resaw assembly - Call Jeff for more info at 574-370-5050

Brewco Band Saw Edger