Pallet Equipment For Sale

MLS Number 10679774 Cook Grade Lumber Resaw 30 HP Will saw 16" wide No return 1 1/4" to 2" blades

Cornell 42" Gang Edger 150 HP Motor (3 years old) (12) Gang Saws (6 new) (7) Moveable Saws (2 new) (24) Various size collars

Cousins Stretch Wrapper Model LP-SW s/n 250511-5L 9079

Cousins LP2100X Wrapping Machine 115 Volt 1 Phase

Cousins LP-SW Wrapper 115Volt 1 Phase Folded down for shipping

60-100 Cresswood Grinder with Hopper, Conveyor and Control Panel. New Gear Box and Bearings put in within the last year. #00849

Crown Electric Pallet Jack

This line is for sale as one lot. 1. Vertical Reciprocating Conveyor (VRC) - 106x80x72 - Roller Dimensions: 94x3 inch diameter - 72" wide roller deck 2. Chain Transfer Conveyor - Space between rollers is 4 feet (size of Transfer deck) - Rollers on each side measure 94x3. - Roller housings on each side measure 72x96x26. -Total dimensions: 72x224x26. 3. Straight chain driven Conveyor - 72x100x26 - 8' rollers 4. 360° rotating turntable conveyor -Base dimensions: 74x58 -Roller dimensions: 40x3 - Conveyor Dimensions: 72x48x26 5. Straight belt driven conveyors (4 of them) - 54x12x12 belts not included 6. Curved belt driven Conveyor - Exterior curve: 224x48x26 - Rollers are 40" long and vary from 2-4.5" wide along curve. 7. Line conveyors (2) - 144x36x24 - Rollers available for this 8. Stacked rollers -96x66x75 - Roller dimensions: 80x3 9. Straight Gravity Rollers (18 of them) - 148x36x6.25 These rollers were stacked 4 high. Legs are available to stack them or they will work in line. 222' run consisting of 18 pieces. 10. 32' decline belt conveyor - This has damage. See last photo.

Single Head 4 blade Notcher: custom built, lightly used Motor 10 HP, 220/440V, 3 phase Maximum notcher size 9” long x 2-1/2” height x 1-5/8” depth Cutterhead with 4 straight HSS knives installed

Single Head Pallet Notcher - New with warranty! 7.5 HP Motor 220/440 3PH Maximum Notch Size: 9" x 2-1/2" x 1-5/8 Power switch with magnetic starter Cutterhead with 4-stright HSS knives (optional 40 knife cutterhead) Dimensions: 48" L x 36" W x 40" H

60" Pallet DIsmantler Motor 10 HP, 220/440V, 3 phase Switch on/off Band saw 228” long x 1-1/4” wide Table dimensions: 60” width x 48” depth Maximum size pallet to dismantle: 60” wide x any length Maximum distance between the horizontal bandsaw blade from table: 1” and up to 3” if the table stop end is cut. Machine dimensions: 115” length X 52” width x 55” height Weight 1,050 lb.

Custom Built Single Head Notcher Manual

Custom Built Single Head Notcher Manual

This unit has been in storage for some time and will need some TLC.

Doosan D32S | Engine Rebuilt Last Year | Diesel

Eagle 4 Stringer Pallet Nailing Machine 36'x 36" To 48"x 48". Polar Air 20HP Air Compressor w/ Matching Dryer & 2 Air Reciever Tanks.

large Eastey heat shrink tunnel Eastey ET 22-20-MBV2 heat tunnel, inside chamber size 24 wide cx 20” tall 220 volt, 3 phase, 50 amps, Year: April 2012 Model ET 2 (z?) 120-MBV2 Serial# ET242052120402, weight 1,000 lbs, Approximate measures: 26” wide x 20 ½” tall, wire belt measures 23 ½” wide, Can provide test run video under power. No charge for crating item Call for a delivered price to your location

Felins Flex Strap Power Plastic Wrapper

2021 Complete Flomat Sorting Line

FMC Pallet Stacker #C819