Sawmill Equipment For Sale
.gif)
3830 Results Found
.jpg?width=220&height=170&mode=crop)
EXTREMA DC-4100 Baghouse Dust CollectorThe "DC-4100" baghouse dust collector is designed to achieve maximum airflow with a superior filtration area. This is achieved by using (36) smaller diameter filter bags to have more filter media in the same space as other similar dust collectors of its size. More filter area means better airflow with less filter maintenance. A manual bag shaker is included.The DC-4100 meets the NFPA664 CFM requirements for indoor dust collectors. The compact design allows this maximum filtration unit to use a depth of less than three and one half along a wall. The 10HP main motor has a dynamic balanced impellor and a magnetic starter is included.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 361 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (36) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 12".
EXTREMA DCF-327E Baghouse Dust Collector.Features a 16" inlet; unit has (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) Micron filter. -- Available for outdoor & indoor use; unit is enclosed. -- Excellent addition to the "DCY Typhoon" Dust Collector; ...ask us why!
EXTREMA DB-75 TYPHOON BLOWER. Capacity 7.5 HP motor and rated at 4,700 CFM. -- Solid heavy gauge steel construction. -- Heavy duty 13.5" dia. dynamically balanced steel impeller. -- 12" Inlet, 13.5" impeller, 14" outlet. -- Rotatable collection port for use in a variety of applications. -- Safety guards on all inlets. -- Complete with magnetic starter. -- Note: 460 Volt available
EXTREMA DCY-1220 L3 TYPHOON Cyclone Filtration Dust Collection System. -- Powerful two-stage dust collection drops out heavier dust particles through a Rotary Air Lock, allowing you to choose the disposal system, before passing finer particles through the fan and filter. -- Air volume rated @ 8,800 CFM. -- Unit includes; 20 HP Motor, with a Soft Start already wired in. -- Rotary air lock with a 1 HP motor @ 38 CFM. -- Low noise operation. -- Standard support frame LEG 3 164" clear height x 149" clear width x 91" clear depth. Includes After-filter Baghouse DC-327E - Features a 16" inlet; unit has (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) Micron filter. -- Unit is enclosed.
$ 850
FALK gear reducer: 25:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-1).
$ 850
FALK gear reducer: 40:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-5).
$ 950
FALK gear reducer: 40:1 ratio; 10 HP. Price $950.00. As-is/where-is. (Inv. # G-6).
$ 600
FALK gear reducer: 8:1 ratio; 15 HP. Price $600.00. As-is/where-is. (Inv. # G-4)
$ 600
FALK gear reducer: 13:1 ratio; 52 HP. Price $600.00. As-is/where-is. (Inv. # G-10).
$ 4,500
Fast-Line sawyer/ operator cab, 5' x 10' x 6' tall, nice large size, good condition
Call for Price
Fas Trac Band Mill with 20 HP Electric Motor
Call for Price
Fastline Super Edger with Hydraulic Power Unit.
$ 86,250
Fast Line scragg mill, similar to "Big Jake", twin blades 56" dia, electric drive, includes off-bearer belts, price includes controls and machine gone through shop, ready for production
Call for Price
Fast Line Super Edger with 7 Blades
Call for Price
Fastline Mdl FLDB Short Log Debarker w/75Hp Motor, Cab & Controls S/N 420982
Call for Price
Fastline Sharp Chain Scragg Mill w/8' Capacity, 36" Saws, 40Hp Motors, Shop Built Horizontal Bottom Cut Saw, Log Positioning Turners, 30 x 80" Slab Takeaway Belt
Call for Price
Fastline Super Slab Saw Edger w/25Hp Motor, 14" x 8' Waste Belt Conveyor & Hyd Drive
Call for Price
Fastline Mdl# FLDB, Short Log Debarker w/75hp Motor, Cab & Controls S/N 420982
MLS Number 11955127 Filer-Stowell42 Inch Sawmill Carriage No controls 200 HP DC drive motor Control cabinet and spare parts 125 HP DC drive motor also available at extra cost.
