Dust Collection Systems For Sale

Dust Collection Systems 

Band Mills (Wide) (43) Band Mills (Thin Kerf) (56) Debarkers (77) Edger-Boards (69) Forklifts (52) Gang Saws (56) Hogs and Wood Grinders (231) Portable Sawmills (37) Resaws-Band (174) Scragg Mills (36) Trim Saws (84) Unscramblers (31) Wheel Loaders (89) Wood Chippers - Stationary (145)
Air Compressors (157) Airlocks (25) Banding-Strapping Machines (167) Blowers and Fans (139) Boilers (26) Bolter Saws (1) Carriages (Sawmill) (29) Carriage Drives (Sawmill) (56) Chip Bins (19) Chip Cyclones (23) Chip Screens (41) Chipping Canters (3) Chop Saws (65) Circular Saw Husks (8) Circular Sawmills (81) Conveyors (78) Conveyors Board Dealing (82) Conveyors Deck (Log Lumber) (206) Conveyors General (30) Conveyors-Auger (5) Conveyors-Live Floor (11) Conveyors-Run-Around (4) Conveyors-Vibrating (47) Conveyors Belts (200) Conveyors-Barn Sweep (25) Conveyors-Live Roll (112) Dip Tanks (3) Drills Single-Multiple (1) Drum Dryers (20) Dry Kilns (47) Dump Hoppers (10) Dust Collection Systems (277) Edger Tailing Devices (6) Edgers-Gang (48) Edgers-Slab (4) Edgers-Vertical (7) Electrical (153) Gang Rip Saws (114) GenSets (28) Hammer Mills (13) Hydraulic Power Packs (94) Knife Grinders (38) Laser Lights (7) Log Home Machinery (14) Log Merchandising Systems (15) Log Turners (Sawmill) (34) Lumber Carts (19) Lumber Sorters (8) Lumber Stackers (28) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (33) Misc (83) Operator Cabs (34) Package Saws (3) Parts and Parts Machines (9) Plywood OSB and Panel Boards (3) Post and Pole Peelers (21) Power Units-Engines (9) Radial Arm Saws (26) Resaws-Circular (3) Scanning Systems (1) Scissor Lifts (53) Screening Systems (12) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (118) Shavings Baggers (2) Shavings Mills (21) Slab Saws (12) Stake Pointers (2) Step Feeders (3) Straight Line Rips (2) Tie Processings (1) Tilt Hoists (17) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 14
277 Results Found
Sort By 
Recently Added Items
Oneida Air Systems XXK200300
Call For Price
Oneida Air Systems XXK200300
STANDARD LISTINGS
Call for Price

AAF PULSE-PAK 21-3H Pulse-Jet Cartridge Dust Collector. (3H) is three-high filter elements. (21) is the total number of Panel Pak V's.The Panel Pak filter element has two flat panels of pleated media in a Vee-Configuration allowing installation and change-out with minimum time and effort. Each cartridge has its own gasket ensuring a positive, air tight seal. -- Consists of two modules: one containing (9) 3x3 filters and the second contains (12) 4x3 filter cartridges, for a total of (21) cartridges. -- Housing dimensions: 191.75" High (with 48" hopper clearance), 104.25" Wide, 94.25" Depth, and Weighs about 6,400 Lbs. -- Air consumption about 6 cubic feet/hr. at 90 PSI of clean dried air. -- Fan and Airlock available at extra cost. please inquire.

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

ACT 3-12 Cartridge Dust Collector Cartridge style downflow dust collector rated at 6,000 CFM. Heavy-duty with 7 and 10 gauge construction. Specifications: -- Blower, 15 HP rated at 6,000 CFM. -- (12) Nano Elite, MERV 15, cartridge filters with 3,046 sq. ft. of filter media that are 99.9% efficient. -- Reverse pulse filter cleaning system. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with quick-lock easy-access filter doors. -- Magnetic motor starter and disconnect. -- 16" inletEquipped with: -- TCBI 15 HP Blower with direct drive, top mount. -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (6) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- Drum Lid Latch Ring. -- Motor starter with disconnect. -- 10 year workmanship and materials warranty -- Made in the USA

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

ACT 3-6 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 4,000 CFM. Specifications: -- Blower, 10 HP rated at 4,000 CFM @ 10" w.c. -- Holds (6) Nano Elite, merv 15, cartridge filters with up to 1,524 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter panel. -- (6) Filter Upgrade to ACT Nano-Elite, flame-retardant, Nano-Fiber media with industry best Merv 15 efficiencyEquipped with: -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (3) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- 12" in-let. -- Silencer for TCBI 1010 year manufactures materials and craftsmanship warranty . Made in the USA

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

ACT 4-16 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 8,000 CFM. Specifications: -- 20 HP Direct drive, top mounter blower rated at 8,000 CFM @ 10" w.c. -- (16) Nano Elite, flame-retardant, Nano-Fiber merv 15, cartridge filters with up to 4,064 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter.Equipped with: -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (8) pulse valves. Goyen diaphragm and solenoid valves -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. Options: -- Fan outlet damper. -- Fan outlet silencer. -- All in one - Starter / disconnect / timer board / pressure gauge Other models available, please check with the Product Manager10 year workmanship and materials warranty -- Made in the USA

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

AER 5,000 CFM Dust System

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

484RF10 baghouse, two dust collector systems available, 6,180 Sq. Ft. cloth area, bolted down rectangular type bags and gasketed cages(484 10ft filter bags Donaldson-Torit type), rotating type arm inside walk-in top plenum, Two fan options Reverse Pulse filter cleaning system- PD pump 7 1/2hp, Explosion vents – pressure relief doors Airlock, Tangential scroll inlet, inlet deflection baffle & air straightener vains 60 degree conical bottom hopper Hopper access door Top walk-in access compartment for filter bags replacement. Abort gate, Has been removed in one piece for quick and easy reinstallation Stored in our yard- ready to load ( no charge) for prompt shipment, Call for a delivered price to your location, Baghouse Approximate height 46ft, diameter 13ft 6”+-, weight? ( F.05.250.)Allied Blower fan, 250HP motor Reliance Electric Duty Master 841 XL , 1785 rpm, 450 BI, serial# 1743, order# 19925, sys.rto, ( Twin city Fan: size 450, type RTF-SW, ARR 1, class 23, serial # 01-163289-1-1) inlet 38”, outlet 36” x 29”, ( F-01-360) 250HP motor Reliance Electric Duty Master 841 XL, 1785 rpm, size 90, serial#1720, order# 19925?, inlet 38”?, 36” x 30” outlet,

 Toledo, WA
Machinery Scene
360-864-2800
Call

Call for Price

AIR CURE 484RF10 Dust Collection System with Rotary Air Lock and Abort Gate.Specifications: -- Filter area capacity 56,000 CFM @ 9:1 Air to Cloth Ratio (ACR), approx. 13'- 2" dia. round baghouse; -- (484) Cloth filter bags of 10' length (3" x 6") oval bags provide for radial movement of bag during cleaning for longer life), 6,180 sq. ft. of filter area. -- Designed for filtration media cleaning via 7.5 HP approx.on board rotary air pump for compressed air operating at about 7.5 PSI. Return air outlet and approx. 48" x 48" inlet for dust laden air. -- Rotating cleaning air manifold driven by 1 HP motor, (1) NEMA IV timer & solenoid/diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. Includes: -- Supplied Fan: ALLIED BLOWER & SHT MTL. SIize: 90 MH fan, 38" inlet dia, with paddle wheel blades powered by 250 HP TEFC motor, ground mounted . Note1: This fan is very versatile as it can operate from 10,000 CFM @ 6" or 7" of water SP all the way up to 40,000 CFM @ approc. 14" of water SP depending on RPM chosen. To be conservative one would keep the upper end to around 1,000 RPM. Motor could be 25 HP or 250 HP at these extremes. Being a radial blade fan it is capable of handling most materials. -- Note 2: Depending on application there is filter area capacity to add another Fan/motor for about 16,000 CFM (as per above). -- Explosion doors; walk-in access door on platform at access door. approx. 18" Rotary Air Lock (RAL) and about 38" Abort Gate with separate support stand and access platform.Features: -- 10-Gauge shell all-welded construction, Tangential scroll inlet and Inlet deflector baffle. -- All cages are unbolted to minimize damage and left in the shell. Bags are removed (to reduce weight on cages) and crated - will likely need to be laundered. -- Actual AIR CURE model is 484AC10. -- Note: Upon installation buyer is responsible for compliance to all applicable NFPA or local, state or Federal codes.Transportation also available at extra cost.

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

AIR CURE 484RF8 Pulse Jet dust Collector.. -- Overall Specs: 30,00 CFM @ 6.1:1 Air-to-cloth ratio, 158" dia. round baghouse with a capacity of (484) cloth filter bags (Bags not Included) of 8' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life), 4,900 sq. ft. of filter. -- Designed for filtration media cleaning via 7.5 HP on board rotary air pump for compressed air operating at about 7.5 psi. Return air outlet and approx. 48" x 48" inlet for dust laden air. -- Filter cleaning: Rotating cleaning air manifold driven by 0.33 HP motor, (1) NEMA 9 solenoid and diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. -- Includes: AEROVENT (TWIN CITY) model 330, type CBA-SW Class 4 Backward Inclined Air Handling Blower, Arrangement 9 with 100 HP TEFC motor; Explosion doors; walk-in access door on platform at top and safety ladder. -- Original cages will be removed and stored separately from the filter. Unique skirt at bottom of cyclone thus no support steel is needed and facilitates anchor bolt installation. -- Depending on application/desired air capacity it can be increased to about 44,000 CFM (@ 9:1 to Air-to-Cloth ration) but to do so will require slightly larger fan/motor. -- Needs new bags as they were discarded.

Tony Cornacchione
800-374-5009 ext:432
Call

$ 7,900

AIREWORKS FX-05-2000 Modular Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, & multiple discharge options.Features: -- "AIREWORKS" has over 20 years of applied experience in developing & building commercial dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing environments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 2,000 CFM / 7-10 IWG with 16.7:1 air to cloth ratio. Equipped with: -- (5) 12" x 6' High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 125 Sq. Ft. of cloth filter area and 16.7:1 air to cloth ratio with 40 Gal. of collection capacity. Complete with: -- Direct drive dynamically balanced centrifugal fan assembly with 5 HP TEFC motor, 1,750 RPM, non-sparking Heavy Duty machined & balanced impeller; 11" inlet dia. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

Bernie Straple
800-374-5009 ext:339
Call

$ 12,600

AIREWORKS FX-10-3500 Modular Dust Collection System. The "FX" Series is a self-contained modular designed unit for interior use that utilizes a dynamically balanced fan.Features: -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options. -- "AIREWORKS" has over 20 years of applied experience in developing & building commercial dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 3,500 CFM / 7-10 IWG with 14:1 air to cloth ratio. Equipped with: -- (10) 12" x 8' High-Efficiency filter bags up and (2) plastic collection bag down. -- The filter bags have 250 Sq. Ft. of cloth filter area and 13:1 air-to-cloth ratio with 80 Gal. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 10 HP TEFC motor, 1.750 RPM -- Non-sparking Heavy Duty machined & balanced impeller; 13" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

AIREWORKS FX-15-5000 Modular Dust Collector. The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- The "FX" series is a self-contained modular designed unit for interior use; it utilizies a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, and offers multiple discharge options. -- Rated at 5,000 CFM / 8.38 IWG with 16:1 air to cloth ratio. -- Equipped with: (12) 12" x 8' High Efficiency filter bags up with 301 Sq. Ft. of cloth filter area. -- Complete with: Direct drive, dynamically balanced, centrifugal fan assembly with 15 HP TEFC motor; Heavy Duty machined & balanced, non-sparking impeller; 15" dia. ductwork inlet. -- Waste collection bin with pneumatic cylinder lift by air switch -- Unit comes with manual motor starter with factory installed wiring from the motor to the starter. -- Sound Level less than 80 db.

Bernie Straple
800-374-5009 ext:339
Call

$ 8,000

AIREWORKS FX-15-4000 Modular Dust Collection System.The "FX" series is a self-contained modular designed unit for interior use, rated at 4,000 CFM.Features: -- It features a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, & multiple discharge options. -- "AIREWORKS" has over 20 years of applied experience in developing & building commerical dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 4,000 CFM / 8.38 IWG with 19.9:1 air to cloth ratio.Equipped with: -- (8) 12" x 8' High Efficiency filter bags up and (2) plastic collection bag down. The filter bags have 201 Sq. Ft. of cloth filter area and 19.9:1 air to cloth ratio with 22 Cu. Ft. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 10 HP TEFC motor, non-sparking Heavy Duty machined & balanced impeller; 12" inlet dia. -- Motor starter not included.

Bernie Straple
800-374-5009 ext:339
Call

$ 15,800

AIREWORKS FX15-5000 Modular VFD controlled Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan. -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options with standard being plastic bags. -- AIREWORKS own Cruise Control system and how it works... Multiple machines can be connected to a single FX collector. The following example shows several machines connected to FX15-5000.Each machine can be isolated by a slide gate when not in use. If machines 1 & 2 total 4,500CFM when they are in use, the sensor will request the Cruise Control software in the VFD to run the fan motor at the required speed to exhaust exactly 4,500CFM. The motor will in this case run at 55.9Hz and consume 11 HP. If machine (4) starts and machine (2) shuts down, then the exhaust requirement drops to 2,200CFM.The Cruise Control will now request the fan motor to spool down to 55Hz and the power consumption drops to 8.6HP. In this way the fan speed and power consumption will automatically be adjusted at all times to match the actual requirement. The built-in Cruise Control guarantee's that the suction is always constant at a minimum power consumption. -- Heavy Duty metal construction,fully welded plenum built using 11 ga. steel. -- Rated at maximum 5,000 CFM pressure range from 8 - 12 IWG. Equipped with: -- (15) 8' tall High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 375 Sq. Ft. of cloth filter area and 21:1 air to cloth ratio with 33 Cu. Ft. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 15 HP TEFC motor, 1,750 RPM. -- Non-sparking Heavy Duty machined & balanced impeller; 15" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

5 HP Mist Collector 460 volt 3 phase

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

 Lenoir, NC
Air Systems Mfg of Lenoir Inc
828-757-3500
Call

Call for Price

APSCO "MH30", material handling fan with belt driven 40 HP TEFC motor. -- 22" Fan inlet dia. (Motor was replaced a couple of years ago). -- Bottom horizontal discharge.

Tony Cornacchione
800-374-5009 ext:432
Call

$ 6,250

ATLANTIC X-5 MODULAR DUST COLLECTION SYSTEM:Specifications: -- Rated @ 3,500 CFM with 5.5" static pressure W.G.; -- (16) 8" x 60" Poly Twill cloth "Quick Release" filter tubes, approx. 440 sq. ft. total cloth area; Discharge to (3) plastic bags. -- Equipped with: 5 HP - 3,500 RPM Blower drive centrifugal fan assembly, anti-spark cast impeller; 13.3/4" inlet dia. -- System includes 230 Volt (factory installed) magnetic starter. -- X-Series Dust Collectors are compliant with NFPA Regulations 664 and 654 for enclosure-less dust collectors.Very strong draw. Quiet. Includes 60 feet, ($2,000) quick clamp disconnect pipes.

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

Duct work as pictured Make a reasonable offer For new applications please call for layout assistance and pricing!!

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Assorted flanges as pictured make a reasonable offer

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Assorted sizes and Features as pictured. heavy duty wielded construction made in USA 60” and 84” filter bag heights please call for pricing upon application

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved