Misc For Sale

Band Mills (Wide) (46) Band Mills (Thin Kerf) (69) Debarkers (78) Edger-Boards (63) Forklifts (58) Gang Saws (49) Hogs and Wood Grinders (215) Portable Sawmills (37) Resaws-Band (170) Scragg Mills (33) Trim Saws (84) Unscramblers (36) Wheel Loaders (72) Wood Chippers - Stationary (149)
Air Compressors (159) Airlocks (24) Banding-Strapping Machines (155) Blowers and Fans (136) Boilers (27) Bolter Saws (2) Carriages (Sawmill) (34) Carriage Drives (Sawmill) (57) Chip Bins (17) Chip Cyclones (25) Chip Screens (40) Chipping Canters (2) Chop Saws (54) Circular Saw Husks (6) Circular Sawmills (85) Conveyors (80) Conveyors Board Dealing (82) Conveyors Deck (Log Lumber) (245) Conveyors General (23) Conveyors-Auger (5) Conveyors-Live Floor (10) Conveyors-Run-Around (5) Conveyors-Vibrating (47) Conveyors Belts (200) Conveyors-Barn Sweep (24) Conveyors-Live Roll (103) Dip Tanks (7) Drills Single-Multiple (1) Drum Dryers (12) Dry Kilns (43) Dump Hoppers (8) Dust Collection Systems (286) Edger Tailing Devices (4) Edgers-Gang (39) Edgers-Slab (7) Edgers-Vertical (6) Electrical (163) Gang Rip Saws (110) GenSets (42) Hammer Mills (10) Hydraulic Power Packs (85) Knife Grinders (41) Laser Lights (7) Log Home Machinery (15) Log Merchandising Systems (12) Log Turners (Sawmill) (33) Lumber Carts (19) Lumber Sorters (6) Lumber Stackers (20) Lumber Stickers (1) Mat Equipment (3) Metal Detectors (37) Misc (88) Operator Cabs (33) Package Saws (2) Parts and Parts Machines (8) Post and Pole Peelers (25) Power Units-Engines (4) Radial Arm Saws (29) Resaws-Circular (4) Scanning Systems (2) Scissor Lifts (49) Screening Systems (10) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (104) Shavings Baggers (1) Shavings Mills (20) Slab Saws (9) Stake Pointers (6) Step Feeders (3) Straight Line Rips (1) Tie Processings (1) Tilt Hoists (17) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 5
88 Results Found
Sort By 
Recently Added Items
Unknown
$4,750
Unknown
Doucut
$27,000
Doucut
Unknown
$750
Unknown
PREMIUM LISTINGS
Call for Price

End Tally Saber™ is a proprietary touch ruler that tallies your lumber with pinpoint accuracy, stopping all claims in their tracks. Simply hold the Saber™ up to your pack of lumber and touch it! Not only is the Saber™ completely wireless, weatherproof and the fastest way to tally lumber, it also features the ability to generate a Graphic Tally Report™. This mobile device can render a graphic representation of a tallied pack of lumber, including piece count, species, thickness, footage, and more.

 Summerfield, NC
Forestry Systems, Inc.
800-868-2559
Call

$ 79,000

Morbark 1200 $79,000 301-639-7122

 Mount Airy, MD
410-795-1866
Call

STANDARD LISTINGS
$ 7,950

More parts included in wooden box - Call Jeff for more info at 574-370-5050

 White Pigeon, MI
Jeff Miller Inc.
574-370-5050
Call

$ 3,500

Armstrong circle saw leveler. Screen will not light up

 Talladega, AL
Woodland Parts & Service Inc
256-362-5097
Call

$ 22,500

Baker/Augusta Mills Cant sizer Recent rebuild by Baker 3.5"-5.5" cants New bearings New belts 6" belt Lineshaft setup Speed up wheel Work ready

Mitch Stevens
828-773-6986
Call

Call for Price

This shop has been closed about a year due to seller's health. Everything is ready to be removed. - Baker 3-Head Resaw - Baker 2-Head Resaw - (2) Baker Dedusters - Baker Single Notcher - Cornell Chop Saw with infeed deck and powered rollcase - (2) Forklifts - Also available: Misc parts, small saws, air compressors...

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 11,900

Brewer Green Chain 3 Strand 20' Electric motor

Mitch Stevens
828-773-6986
Call

$ 5,800

5 Ton David Round 202 Series Air Winch - Never put into service, stored under cover, speed 19' per minute, capacity 400' of 1/2" wire rope, 5 ton single line load. Sells new for over $14,000…Check it out!

Sawmill Exchange
713-729-6455
Call

$ 2,255

Used DODGE TDT26 shaft mounted gear reducer; 25.66:1 ratio, input shaft diameter 2 3/8", bore 5", S/N 1645. Offered as-is where-is. (INV.G-18) Price $2,255.00.

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

Call for Price

DOOSAN portable lighting with only .2 hours.

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 27,000

21" strand deck, 2 notcher heads, electric drive, some air, 1 head is a notcher & 1 is a groover, 220 V 3 ph., 10' dia. turning table included, in good working condition, call 785-223-0424

Showcase Equipment
260-250-4645
Call

$ 1,850

1-9 S 05662, 10" x 15', painted, HD flighting, hydraulic drive, in very good condition

 Wolcottville, IN
Showcase Equipment
260-250-4645
Call

Call for Price

Krusi Krusimatic G2 Log Milling Machine - Capable of milling dovetails, lap joints, joinery, end cuts, key cuts and drill holes - Fully automated - Still installed and available for inspection

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Call for Price

LANAIR Oil Heater

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 2,000

Lenox Friction Bandsaw Blades: Pallet dismantling blades. 47 per pallet. 2 pallets available. 21'-6" Bimetal 1". .035 10 TPI. $2250.00 per pallet. Shipping weight 175# per pallet. Buyer responsible for cost of shipping. No rust, clean, new, in boxes. Dock side pick up. Asking Price: 2250.00

Sawmill Exchange
713-729-6455
Call

$ 14,500

New steel Logging temporary bridges. 4' x 30' Price is for 3 sections. Single sections sold at $5300 each.

Forestry First
855-588-7871 ext:1
Call

$ 27,000

McDonough Linebar

 Shipshewana, IN
Jeff Miller Inc.
574-370-5050
Call

Call for Price

Mellot Unscrambler

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Call for Price

Miller Dialarc 250 AC/DC Welder

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 29,000

MLS Number 11983452 USNR M6 Millexpert Edger Optimizer Computer System USNR M6 Millexpert computer system for edger. Installed 2010 and took out December 2022. Has one windows 7 analize computer and one data acquisition computer. Seventeen M6 Dynavision scanner heads, an Allen Bradley PLC-5/40E with five 1771 input cards and seven output cards, four 1771 linear positioning cards. Three TT5RBU0240 24” stroke temposonic wands, four 60” stroke TTSRBU0600 wands. Seven Moog model 641F229C valves. Two operator panels.

Carolina Used Machinery
828-773-2204
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved