Circular Sawmills For Sale
Category
Circular Sawmills
93 Results Found
Call for Price
COMPLETE SAW MILL CARDINAL - SWP complete semi-automatic saw mill consisting of 3-strand log in-feed chain deck; 2-strand chain seperator table; de-barker in-feed chain conveyor, MORBARK rosser head type 60 HP de-barker; c/w out-feed chain conveyor with hydraulic log tipper; 3-strand mill in-feed chain conveyor; CARNIDAL incline separator; CUT-CO 36"twin saw with twin overhead blades; cobination single cant twin slab carrier with manual refuse station; CARNIDAL incline slab de-scrambler; re-saw/grading in-feed roll conveyor; CARDNIAL 689C 42" slab re-saw automatic saw with MUDATA PLC control; 6-strand edger in-feed table; 7-strand re-saw out-feed table; CARDINAL 4-strand finished lumber out-feed table; CARDINAL incline de-scrambler; CANADIAN TRIM double end precision cut to length saw; 6-strand trim saw transfer table; waste/scrap recovery system. HAS THE CAPACITY TO SAW 40,000 BD FT OF 8 FT CEDAR IN 8 HOURS LOCATED IN ARTHURETTE, NB. COMPLETE SAW SHARPENING SYSTEMS INCLUDED. MILL COMES WITH 46 ACRES OF LAND.
Cleereman 3 head-block, 36" carriage, Timber Tiger electric set-works, includes track/ drive/ 60" husk/ cab and all controls, in good working condition
Call for Price
COMPLETE SAWMILL FOR SALE: HMC Debarker, Corley Carriage with 56” headsaw, McDonough Band Resaw w/ Merry-Go-Round, Cornel Slab Saw, 30’ green chain, air compressor, log decks, electrical set up and more. Call 585-538-4750 for more info and pictures. Make offer on sawmill equipment, will separate. Located in Western NY. GENERATOR ALSO AVAILABLE: 3408B 500KW CAT asking $12,000.
$ 227,500
2020 (3) HB American Pioneer Sawmill w/ (3) strand infeed log deck, 140 HD chain type log turner, off bearer system 5 HP mounted on end of frame w/ HD feed works, joystick controls, Siemens S7-1200 Simatic S7 PLC computer setworks, will cut up to 20’ w/ 5 x 5 x 6’ tall rear entry saw cab w/ top mount air conditioner, air ride, sawyers seat, mounted on 50’ frame w/ 200 HP electric motor& 200 HP soft star starter - includes hammer dog mounted on inside of #2 knee for oversized logs, includes cant kickers on each knee for fast action log turner, includes 50’ flat x 30’ incline barn sweep type dust conveyor for saw dust removal S/N AP2020-050, w/ Pioneer (2) saw vertical edger w/ 40 HP electric motor & electric over hydraulic controls mounted on sawmill (NA447 motor base), includes (6) 56” saw blades (ref #74) New Listing! Call Rachel for more photos & information (931) 797-6284
$ 6,000
Used Belsaw Circular saw mill. Need some repair work done. Also have the 3-speed manual gear box.
$ 120,000
Cardinal saw mill! was used for milling timbers used to make crane mats.
$ 6,000
Chase Circular Sawmill includes log turner, feed deck, vertical edger, and 2 blowers. Unable to demonstrate.
Cleereman 3 head-block, Model;36, SN; 115, air set-works, includes track-frame and cable drum, working condition
w/older cab & controls, 3HB, RH, 12V over air, with some wear, in operation today, check it out
3HB, LH, air dogs, Silvatech Compurized setworks, w/controls in the cab, cant kickers, verticla edger, 50hp electric motor, a complete mill, ready to load, little use after rebuilt, in very very good condition, little wear, free loading, MUST SELL
Call for Price
Cleereman Model 40 3HB Carriage Track and Panagraph W/ Saw Cab and Controls
Call for Price
Cleereman Model 36 3HB Carriage Track Panagraph Cab and Controls
Call for Price
Cleereman Model 48 3HB Carriage, Track and Panagraph
Call for Price
36" Cleereman LH Carriage. S/N 36-524-95
Cleereman 4 Head Block Circle Mill 75HP DC Carriage Drive S/N 38-745-98
Call for Price
Cleerman 36 in hydraulic porporational 3-head block right hand carriage w/48ft track; s/n 36833-R-4 Silva Tech computerized set works Cleereman Hydra Power Mod 96213B 10hp Electric/hydraulic proportional power unit; s/n J8772A
$ 9,000
CM Sawmill Comes With Air operated 15ft carriage Selset set works Head works with 48 inch saw 100hp electric motor Hydraulic pack with all hoses FREE Delivery within 100km of Moncton,NB Trailer not included
Call for Price
CMC 3 Head Block Circle Mill cab and controls carriage and Track
Call for Price
Corinth 36" 3 Head Block Carriage, Track,Cab, Control, T-Berry 214 Drive, Mellott #5 Log Turner & Meadows 2 Saw Vertical Edger.
$ 18,000
Handset Sawmill - #2 Corinth Handset Sawmill, 48’ Track on Concrete & Steel W/ Log Turner, Edger, Planer W/ 5 HP Electric Motor, 54” Circle Saw & (2) Extra Carriages (not in use) (Ref # 143) Call Amy Cross for more information (928) 723-9449