Sawmill Equipment For Sale
3812 Results Found
Call for Price
1984 Sanborn Min Max Wide Band Sawmill with Live Deck. Detroit 271 engine with the largest injectors that are made for that engine. It starts and runs well. Includes: hydraulic drive 3 chain live deck that is about 16' long and 12' wide with a stop and loader and arms that go across the bed of the mill. The logs must be rolled across the arms to the 4 head blocks. The frame of the live deck is mounted on 3x3x3 concrete cubes. set of 4 large head blocks with the same design as the original but which are about 12" large capacity than the originals. 40 foot long 3 chain green chain with new hydraulic motor and large gear reduction unit, 3 saw Chase 24+" edger with a 271 power unit that starts and runs well. 7 bands here and another 5 being repaired. Maintenance and Repairs Done: - balanced both wheels, reground both wheels - removed some weight from the upper wheel - added a weight strain system instead of a small spring - added vibration damping connections - provided electric shut off and throttle to the engine - added an auxiliary open center hydraulic pump and valves. The pump is driven off the front of the crankshaft of the engine - replaced the bearings throughout the mill - strengthened the take away table to take very heavy loads - installed a new set work screw system - removed the pantograph for hydraulic supply and replaced it with an igus hose and cable carrying chain Call 800-459-2148 for more info.
2000 Sanborn Min Max This is not a whole mill. - Two complete good working Silvatech Set works , - Four Heavy Duty Head Blocks . Board Dogs, Cant Dogs, Turners and Tapers all Hydraulic. These were custom built super heavy duty for this mill . Very well cared for. Great care taken in the removal. - Every thing is under cover. - It’s the complete system with everything you need to put it back together, all labeled and photos. - The spare set works was near new when bought. - Everything is on heavy duty pallets can be shipped. Call 800-459-2148 for more info.
Call for Price
This mill has been damaged, but if you want good parts there are some here. Call 276-472-2199 for more info.
Call for Price
SANDMAN DL7236 Downdraft Sanding Table;The SANDMAN Sanding Table is a dedicated sanding station that doubles as a workbench.Specifications: -- 72" X 36" Rubberized work surface. -- 1.5 HP T.E.F.C. 220V 1-Phase motor with 10-5/8" LAU blower with sealed ball bearings. -- Industrial casters with 4" wheels, (2) ridged, (2) swivel-lock 2-ways. -- Magnetic tool holder. -- Hinged tilt-up top with gas strut lid support for easy filter servicing. -- Adjustable in height from 34" - 38". -- Grid system top adds versatility. -- 10.4 Cu. Ft. of built in storage area with 1 pull out shelf. -- Easy filter service.
SANDMAN DL9648 Downdraft Sanding TableThe DL9648 is a dedicated 96" x 48" sanding table that doubles as a workbench. The Sand Pro DL9648 is perfect for sanding large pieces such as doors or as a multi-person sanding station. Specifications: -- Table height 36", table size 96" x 48". -- (2) 1.5 HP TEFC motors with 7,400 CFM @ 1.5 SP and (2) 16" backward inclined fans. -- (6) Extended surface pleated filters each 20" x 25" x 2" deep w/ 1/2" netted polyester filter. Features: -- (4) 110 V duplex receptacles. -- Rubberized mar-proof top. -- Grid system top for jigs and fixtures. -- Hinged top with gas strut lid support for easy access to filters. -- (2) 10" x 32" Shelves. (2) 18" x 24" Storage drawers. -- Stainless steel hanger for air orbital sanders (choose 5" or 6"). Options: -- 3" Swivel casters (Adds 3/4" to machine height). -- Case of (12) replacement filters. -- Single phase available -- 18 Month Limited WarrantyNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.
SANDMAN M74836 Downdraft Sanding TableGreat sanding table for a singular function such as doing cabinet doors, door fronts, etc. This downdraft table has a 6″ overhang on the front side making it good for sanding while sitting. Machine comes standard with casters, utility tray, & Felt-lined Platforms.Specifications: 48 L x 36" W top surface with heights of 32", 34" $ 36". -- Overhangs of 6" front. 0" back and 4" ends. -- (2) DP20252 Filters and (1) PF4029 pre-filter. -- 1 HP Baldor Motor – Standard Single Phase 110V (13 Amps) -- (18) Month warranty on parts.(Single and 3-Ph 220V available)NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.
SANDMAN DL7236 Downdraft Sanding Table;The SANDMAN Sanding Table is a dedicated sanding station that doubles as a workbench. -- 72" X 36" Rubberized work surface. -- 1.5 HP T.E.F.C. 220V 1-Phase motor with 10-5/8" LAU blower with sealed ball bearings. -- Industrial casters with 4" wheels, (2) ridged, (2) swivel-lock 2-ways. -- Hinged tilt-up top with gas strut lid support for easy filter servicing. -- Adjustable in height from 34" - 38". -- Grid system top adds versatility. -- 10.4 Cu. Ft. of built in storage area with 1 pull out shelf. -- 18 Months Limited WarrantyNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.
SANDMAN M7236 Downdraft Sanding Table110V 1 HP (M7236) T.E.F.C Motor with 15’ power cord. -- 72" x 36" Rubberized work surface. -- 10-5/8" LAU blower with sealed ball bearings. -- Industrial casters with 5" wheels, (2) ridged and (2) swivel-lock 2-ways. -- Hinged tilt-up top with gas strut lid support for easy filter servicing. -- Grid system top adds versatility. -- (18) Month warranty on parts.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.
Call for Price
SANI-TECH SC1040/30 AUGER COMPACTOR -- 10 HP Motor --Hopper Capacity 4.3 Cubic Yards --Auger RPM 10 --Displacement Rate 270 Cubic Yards / Hour -- 20 Yard Compactor
Call for Price
Call for Price
Manufactured by the Morgan family. Multi-Head Trim Saw available in 2, 3, 4, or 5 head models. Each comes with 20" carbide blades and 10hp motor per head. Adjustable heads with variable speed feed. Optional larger blades and motors offered. Product and Waste Conveyors custom built to fit your need. Need parts to fit your Morgan Saws? Give us a call. We are still building the ORIGINAL low profile band resaw.
Call for Price
Manufactured by the Morgan family that brought you the original low profile band is the Wide Cut Resaw. Some available options include hands free return, multiple heads or a line shaft for the customer to supply power. It has 29" diameter solid steel band wheels, a 1-1/2" wide band and a 30 hp motor on a cutting head. The hold down wheels and feed conveyor are powered by a 5 hp hydralic unit. Cutting capacity is 14" wide with a ridged 12" wide UHMW covered infeed conveyor. There is a 1/2" - 6" adjusatble cutting depth capacity and virtually unlimited cant height restrictions.
Manufactured by the Morgan Family that brought you the Original Low Profile Band. Available with or without a return. Hands free return eliminates one operator, saving you on labor. Standard 72" return length . Three phase or single phase electric, gas or line shaft models available. Has two quick sets for conveyor height. Other models available are two, three or four head band resaws. Sawmill Supplies & Equipment is proud to be a small town family owned business. Owned by the Morgans and located in Sarepta, La. Need parts for your Morgan equipment? Give us a call. Tell us what you want and we build it. Standard and Custom equipment available.
Manufactured by the Morgan Family that brought you the Original Low Profile Band Resaw. Available with or without a return. Hands free return eliminates one operator, saving you on labor.Three phase or single phase electric, gas or line shaft models available.Other models available are single, two, or four head band resaws. Sawmill Supplies & Equipment is proud to be a small town family owned business. Owned by the Morgans and located in Sarepta, La. Need parts for your Morgan equipment? Give us a call. Tell us what you want and we build it. Standard and Custom equipment available.
Call for Price
Variable feed speed up to 100fpm with powered infeed and outfeed belts. Very accurate with quick adjust to edge 3 1/2" boards to 16" boards with 1/8" increments. Cuts up to 2 1/4 height and will pass up to 30" wide flitches. Single or 3 phase electric. 10hp on blades / 1hp on feedworks. Optional tables on infeed and outfeed. Call (318)994-2116
Call for Price
PE-40003 - SMW 3HD Trim Saw - Cutting: 24"-13'L x 3/8"-4 3/4"T x 3/8"-15 3/4", 3 18"dia Saw Blades, Each with 10 HP Motor, ~320' per 8hr shift, ~4400#. Also Available in 4 Head and 5 Head.
Call for Price
DZ-450 - SMW Automatic Cut Off Saw - Cutting: 3/8"-4 3/4"H x 1"-8"W x 4"-8"T, 18"dia Saw Blade, 1/64" Cutting Tolerance, 4" Dust Collection Hole, 3000rpm Spindle Rotation Speed, 40 pieces/min, 16'-100' Feeding Speed, 6' 6"/13'/19' 6"L Feed Table, 47"L Discharge Table, Cylinder Press w/ 73"-102"psi, Schneider Electronic Components, Siemans PLC Touch Screen, 3 Phase 380V 50Hz, 1hp Servo Motor/11hp Cutting Motor. Also Available: DZ-600 - SMW Automatic Cut Off Saw - Cutting: 3/8"-5 1/2"H x 1"-12"W x 4"-12"T, 23 1/2"dia Saw Blade, 1/64" Cutting Tolerance, 4" Dust Collection Hole, 3000rpm Spindle Rotation Speed, 45 pieces/min, 16'-100' Feeding Speed, 6' 6"/13'/19' 6"L Feed Table, 47"L Discharge Table, Cylinder Press w/ 73"-102"psi, Schneider Electronic Components, Siemans PLC Touch Screen, 3 Phase 380V 50Hz, 1.5hp Servo Motor/15hp Cutting Motor.
Call for Price
PE-50004 - SMW 4 Head Trim Saw - Cutting: 24"-16' 6"L x 3/8"-4 3/4"T x 3/8"-15 3/4"W, 4-18"dia Saw Blade, Each w/10HP Motor, ~490' per 8hr shift, ~5500#. Also Available As 5 Head - PE-60005 - SMW 5 Head Trim Saw - Cutting 24"-19' 6"L x 3/8"-4 3/4"T x 3/8"-15 3/4"W, 5-18"dia Saw Blade, Each w/10HP Motor, ~650' per 8hr shift, ~6600lbs.