Sawmill Equipment For Sale

EXTREMA DC-4100 Baghouse Dust CollectorThe "DC-4100" baghouse dust collector is designed to achieve maximum airflow with a superior filtration area. This is achieved by using (36) smaller diameter filter bags to have more filter media in the same space as other similar dust collectors of its size. More filter area means better airflow with less filter maintenance. A manual bag shaker is included.The DC-4100 meets the NFPA664 CFM requirements for indoor dust collectors. The compact design allows this maximum filtration unit to use a depth of less than three and one half along a wall. The 10HP main motor has a dynamic balanced impellor and a magnetic starter is included.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 361 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (36) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 12".

EXTREMA DC-240.1 TYPHOON Fabric Filtration Dust Collection System. -- Powerful, portable, and affordable dust collector with roll around casters mounted to a steel platform base. -- (2) Oversized Fabric filter top bags, approx. 75 sq. ft.filter area, are placed above plastic collection bags, approx. 18.85 cu. ft. storage capacity. -- 3,950 CFM Output with single-stage blower. -- 5 HP Induction motor. -- Filter bags filter dust particles down to (5) Micron in size. -- Main inlet 10" or dual 4" adapter.

EXTREMA - DCY-1220 L3 TYPHOON: Cyclone Filtration Dust Collection System. -- Powerful 2-stage dust collection drops out heavier dust particles through a Rotary Air Lock, allowing you to choose the disposal system before passing finer particles through the fan and filter. -- Air volume rated @ 8,800 CFM. -- Unit includes: 20 HP Motor with a Soft Start already wired in. -- Rotary air lock with: 1 HP Motor @ 38 CFM. -- Low noise operation. -- Standard support frame: LEG 3; 164" clear height x 149" clear width x 91" clear depth. Includes after filter Baghouse DC-327E. Features: 16" Inlet; (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) micron filter. -- Unit is enclosed.

EXTREMA XF-DC4.3 Power FeederExtrema has a wide range of power feeders that range from compact junior feeders to large 5-roller feeders. The XF-DC4 Series features a 4-roller system with variable speeds. Includes the 2/3HP DC brushless servo motor for higher torque and better variable speed control than a 1HP AC motor.Features: -- 4 Rollers -- FWD & REV -- 1PH or 3PH 230V -- DC Brushless Servo Motor -- 120mm x 60mm Rollers -- Infinitely variable feed speeds 7-72ft/minSpecification: -- Horsepower: .7HP -- Number of Rollers: 4 -- Number of Speeds: Variable -- Speeds: 7-72 -- Min Speed (ft/min): 7 -- Max Speed: 72 -- Suspension: 3/4" -- Roller Size: 120mm x 60mm Rollers -- Weight: 141 lbs

Falcon 5 Saw 16ft Drop Saw Trimmer with 6inch Capacity, Waste Conveyor

FALK gear reducer: 13:1 ratio; 52 HP. Price $600.00. As-is/where-is. (Inv. # G-10).

FALK gear reducer: 40:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-5).

FALK gear reducer: 40:1 ratio; 10 HP. Price $950.00. As-is/where-is. (Inv. # G-6).

FALK gear reducer: 25:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-1).

FALK gear reducer: 8:1 ratio; 15 HP. Price $600.00. As-is/where-is. (Inv. # G-4)

Farm Boy Ag System 9ft x 25ft Galvanized Dry Storage Bin

FARR GOLD GS4 DUST/FUME/MATERIAL COLLECTOR: 3,000 CFM Rated cap., 1,300 sq. ft. filter area from (4) cartridge filters, approx. 2.3:1 air: cloth ratio . -- Equipped with: 5 HP Pull thru motor; dirty air is pulled into the filter area at bottom of filter media section allowing gross dust particles to fall into collector barrels located beneath pyramidal hopper discharging to a sealed drum (not included) -- Fine dust is pulled up thru the cartridge filters; dust filter cartridges are cleaned by automatic pulse jet with minimum compressed air consumption; cleaned air continues thru blower and is returned to the building air supply thru a silencer.. -- Includes: Cyclone with slide gate discharging into a sealed barrel (not included), electrical control panel, support stand with clearance under hopper, discharge for a waste bin,. access door, some pipe as pictured. -- Note this unit is still in use. Please inquire for availability date.

Fas Trac Band Mill with 20 HP Electric Motor

Fast Line scragg mill, similar to "Big Jake", twin blades 56" dia, electric drive, includes off-bearer belts, price includes controls and machine gone through shop, ready for production

Fastline Slab Edger with 40hp Motor

Fastline Mdl FLDB Short Log Debarker w/75Hp Motor, Cab & Controls S/N 420982

Fastline Super Edger with Hydraulic Power Unit.

Fast Line Super Edger with 7 Blades

Fastline Sharp Chain Scragg Mill w/8' Capacity, 36" Saws, 40Hp Motors, Shop Built Horizontal Bottom Cut Saw, Log Positioning Turners, 30 x 80" Slab Takeaway Belt

Fastline Super Slab Saw Edger w/25Hp Motor, 14" x 8' Waste Belt Conveyor & Hyd Drive