Sawmill Equipment For Sale

Band Mills (Wide) (41) Band Mills (Thin Kerf) (49) Debarkers (82) Edger-Boards (59) Forklifts (51) Gang Saws (55) Hogs and Wood Grinders (238) Log Loaders (1) Portable Sawmills (28) Resaws-Band (169) Scragg Mills (36) Trim Saws (84) Unscramblers (33) Wheel Loaders (88) Wood Chippers - Stationary (145)
Air Compressors (167) Airlocks (25) Banding-Strapping Machines (127) Blowers and Fans (129) Boilers (24) Bolter Saws (1) Carriages (Sawmill) (29) Carriage Drives (Sawmill) (57) Chip Bins (18) Chip Cyclones (24) Chip Screens (42) Chipping Canters (3) Chop Saws (67) Circular Saw Husks (8) Circular Sawmills (83) Conveyors (81) Conveyors Board Dealing (79) Conveyors Deck (Log Lumber) (212) Conveyors General (30) Conveyors-Auger (4) Conveyors-Live Floor (9) Conveyors-Run-Around (4) Conveyors-Vibrating (53) Conveyors Belts (200) Conveyors-Barn Sweep (26) Conveyors-Live Roll (121) Dip Tanks (4) Drum Dryers (21) Dry Kilns (46) Dump Hoppers (8) Dust Collection Systems (270) Edger Tailing Devices (6) Edgers-Gang (46) Edgers-Slab (6) Edgers-Vertical (6) Electrical (156) Gang Rip Saws (119) GenSets (29) Hammer Mills (7) Hydraulic Power Packs (95) Knife Grinders (36) Laser Lights (8) Log Home Machinery (14) Log Merchandising Systems (15) Log Turners (Sawmill) (35) Lumber Carts (20) Lumber Sorters (8) Lumber Stackers (28) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (37) Misc (90) Operator Cabs (31) Package Saws (4) Parts and Parts Machines (8) Plywood OSB and Panel Boards (4) Post and Pole Peelers (21) Power Units-Engines (12) Radial Arm Saws (27) Resaws-Circular (2) Scanning Systems (1) Scissor Lifts (55) Screening Systems (9) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (115) Shavings Mills (19) Slab Saws (14) Stake Pointers (1) Step Feeders (3) Straight Line Rips (2) Tie Processings (1) Tilt Hoists (16) Wrap and Packaging (6)

Filtering

Reset All 

thru
 Used     New
Viewing Page 72 of 191
3806 Results Found
Sort By 
Recently Added Items
Unknown
Call For Price
Unknown
Unknown
Call For Price
Unknown
Unknown
Call For Price
Unknown
2000 Morbark 640
$160,000
2000 Morbark 640
Call for Price

MAX-PAK - MP6020-7: Vertical Baler -- Motor: 15 HP. -- Variety of Bale materials: Cardboard; shredded newspaper; aluminum cans; P.E.T. plastics. -- Bale size: 30″ x 48″ x 60″. -- Max. Bale weight: 1,300 Lbs shredded ONP; 1,200 Lbs for OCC.

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

Maxi Mill Quade Scragg with Premium Cab & Controls

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

MAXIFLOW by AQC 9MCH4-72 CARTRIDGE Filter Dust Collector. -- Specifications: 35,000 1CFM range approx (depending on application and ACR required). Filter Cartridge System complete with (72) cylindrical cartridges (130 sq. ft. cloth area per cylindrical cartridge - 13.84"OD x 9.47" ID x 26" long.) for a total 9,360 sq..ft. of filter area. -- Cartridge Specs: SB-820, 100% Polyester Spun-bolded, 8.0 oz/sq. yds. Air permeability 20 -30 CFM/sq. ft. @ 0.5" WG. 200°F continuous operating temperature. -- Comes with: Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges; Sequencing Timer in an enclosure. -- Construction: 11 gage fully welded construction. 1/4" thick plate Tube Sheet. (3) V-shape 66" hoppers under filter housing. Heavy Duty steel legs to position unit approximately 43"' above the ground, providing sufficient clearance for (5) 55 Gal. drums.. Housing rated for +/- 20 " WG. Includes 92) 20" dia. top inlet pipe. -- Equipped with: BAE-SW Size 402TWIN CITY Class 4 Air-Foil Fan belt driven by a 150 HP , 1783 RPM, TEFC Fan generates approx 35,000 CFM . Ground-mounted fan/motor. -- Includes: Control Panel. Sprinkler System. Catwalk/Ladder. Barrels & Ducting. -- Services Required: 110V 50-60 Hz; air supply of approx. 22 CFM @ 90 - 100 PSI. Pulses every 10 sec. -- Overall filter approx. dimensions/Weight: 186 W x 111" Deep x 160" H. 9,500 Lbs. -- Seismic rating zone 4, Wind resistance 160 KPH (100 MPH)

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

MAXIFLOW by AQC V3-6MCH3-36 CARTRIDGE Filter Dust Collector. -- Specifications: 16,000 CFM approx. Filter Cartridge System complete with (36) cylindrical cartridges (130 sq. ft. cloth area per cylindrical cartridge - 13.84"OD x 9.47" ID x 26" long.) for a total 4,680 sq..ft. of filter area; operating at 3.4:1 air-to-cloth ratio. -- Cartridge Specs: SB-820, 100% Polyester Spun-bolded, 8.0 oz/sq. yds. Air permeability 20 -30 cfm/sq. ft. @ 0.5" WG. 200°F continuous operating temperature. -- Comes with: Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges; Sequencing Timer in an enclosure. -- Construction: 11 gage fully welded construction. 1/4" thick plate Tube Sheet. (3) V-shape 66" hoppers under filter housing. Heavy Duty steel legs to position unit approximately 43"' above the ground, providing sufficient clearance for (3) 55 Gal. drums.. Housing rated for +/- 20 " WG. Includes 92) 20" dia. top inlet pipe. -- Equipped with: TWIN CITY Fan, approx. 26" inlet belt driven by a 40 HP , 1800 RPM, TEFC Fan generates 16,000 CFM at 9" WG. Ground-mounted fan/motor. -- Features: ABB 'HVAC' series VFD (Variable Frequency Drive) for variable speed of motor to conveniently control desired CFM.. AfterFilter section with HEPA filters for return air into building with (4) grille sections. -- Services Required: 110V 50-60 Hz; air supply of 12 CFM @ 90 - 100 PSI. Pulses every 10 sec. -- Overall filter dimensions/Weight: 86" wide x 132" long x 160" ht. (156.5" + inlet flange); 6,500 Lbs. -- Seismic rating zone 4, Wind resistance 160 KPH (100 MPH). -- Unit available Oct 1, 2023.

Tony Cornacchione
800-374-5009 ext:432
Call

$ 48,000

McCormick Complete Cut Up System minus the saw with controls and 10 hp hydraulic pack. 20’x24” infeed roll case with turners and positioners, 18’x24” outfeed roll case with measurement pistons, 12’x 29” wide belt conveyor, kicker and 48’x24”wide waste conveyor. Excellent condition. Price Reduced! $48,000 OBO

 Gnadenhutten, OH
Millwood Lumber Inc.
330-603-1794
Call

Call for Price

McCormick Inline Metal Detector with Controls

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

6' 72M McDonough Band Head Rig Weight Strained S/N 157 With Slab Belt

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

8' McDonough Line Bar Resaw w/Linear Positioning Cylinder Only. Out and Ready to Ship.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 218,000

2001 McDonough Precision Duty 42" Carriage. 3 Knees. Pantograph, UHMW Cant Kickers, Brownsville Turners on each Knee. Needs to be rebuilt and will come with a 1 year warranty (same as new).

 Eau Claire, WI
McDonough Manufacturing Co.
715-834-7755
Call

Call for Price

McDonough 6' Band Head Rig with Weight Strain, Line Bar,4x4 Cab 24" x 18' Infeed Rollcase, cant positioner, Controls & 36" 22' Outfeed Rollcase

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

McDonough Hydraulic Unit

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

McDonough 8' Line Bar Infeed

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 32,000

Used, good condition - Call Jeff for more info at 574-370-5050 $32,000

 White Pigeon, MI
Jeff Miller Inc.
574-370-5050
Call

Call for Price

McDonough guide block dresser s/n RDM-980

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

McDonough Guide Dresser

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

McDonough BDM-601 Guide Block Dresser

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 76,000

McDonough 54" Center Split - Call Jeff at 574-370-5050 $76,000

 White Pigeon, MI
Jeff Miller Inc.
574-370-5050
Call

Call for Price

1992 McDonough Left Hand Stub Line Bar Resaw Attachment S/N LBR475 Out and Ready to Ship

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

McDonough 62" Horizontal Resaw Guides and guide cutter included System is still installed and ready to be removed.

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 145,000

This Resaw was originally built in 1995. Left Hand, 6 1/4" wide Wheels for 7" wide x 26' long bandsaws. Air Strain, Pressure Guides, 4 Roll Hydraulically driven Feedworks, Top Wheel Guard, and 60HP Motor and Drive package. Top and Lower Wheels will have new Wheel Bearings installed. Wheels will be resurfaced, balanced and painted. 4 Roll hydraulically driven Feedworks with 12" Roll opening outside the sawline and 6" Roll opening inside the sawline. Once rebuilt, this Resaw will come with a same-as-new 1 year warranty.

 Eau Claire, WI
McDonough Manufacturing Co.
715-834-7755
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved