Chip Bins For Sale

Chip Bins 

Band Mills (Wide) (37) Band Mills (Thin Kerf) (27) Debarkers (68) Edger-Boards (40) Forklifts (55) Gang Saws (31) Hogs and Wood Grinders (201) Portable Sawmills (19) Resaws-Band (113) Scragg Mills (20) Trim Saws (71) Unscramblers (39) Wheel Loaders (65) Wood Chippers - Stationary (120)
Air Compressors (140) Airlocks (22) Band Choppers (1) Banding-Strapping Machines (101) Blowers and Fans (112) Boilers (16) Bolter Saws (1) Carriages (Sawmill) (27) Carriage Drives (Sawmill) (52) Chip Bins (19) Chip Cyclones (19) Chip Screens (40) Chipping Canters (1) Chop Saws (32) Circular Saw Husks (3) Circular Sawmills (68) Converyors-Lug Loader (1) Conveyors (78) Conveyors Board Dealing (98) Conveyors Deck (Log Lumber) (201) Conveyors General (23) Conveyors-Auger (6) Conveyors-Live Floor (13) Conveyors-Run-Around (5) Conveyors-Vibrating (41) Conveyors Belts (167) Conveyors-Barn Sweep (24) Conveyors-Live Roll (115) Dip Tanks (2) Drum Dryers (16) Dry Kilns (23) Dump Hoppers (2) Dust Collection Systems (245) Edger Tailing Devices (4) Edgers-Gang (36) Edgers-Slab (4) Edgers-Vertical (5) Electrical (178) Fuel Tanks (1) Gang Rip Saws (75) GenSets (41) Hammer Mills (3) Hydraulic Power Packs (71) Knife Grinders (39) Laser Lights (5) Log Home Machinery (9) Log Merchandising Systems (12) Log Turners (Sawmill) (30) Lumber Stackers (24) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (26) Misc (105) Operator Cabs (25) Package Saws (2) Parts and Parts Machines (5) Post and Pole Peelers (27) Power Units-Engines (9) Radial Arm Saws (26) Scanning Systems (3) Scissor Lifts (46) Screening Systems (3) Setworks - Sawmill (5) Shapers (1) Sharpening Equipment (107) Shavings Baggers (4) Shavings Mills (21) Slab Saws (6) Stake Pointers (4) Straight Line Rips (2) Tie Processings (2) Wrap and Packaging (3)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
19 Results Found
Sort By 
STANDARD LISTINGS
Custom Built  Chip Bin
Call for Price

(2) 17 Unit Chip Bins available Straight wall units Designed to handle hog fuel Systems were only run for a short amount of time.

Carolina Machinery Sales, Inc
704-288-1904
Call

Peerless Mfg 20 UNITS  Chip Bin
$10,000

Peerless bin: - It holds 20 units, or about a chip-truckload - It runs on hydraulics - It has an augur across the top to distribute the material evenly into it - Already disassembled, ready for pickup

Sawmill Exchange
713-729-6455
Call

Peerless Mfg 21 unit  Chip Bin
Call for Price

Peerless 21 unit chip bin, ready to load

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Peerless Mfg 21 Unit  Chip Bin
Call for Price

Peerless 21 unit chip bin, ready to load

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Peerless Mfg BINS  Chip Bin
Call for Price

SEVERAL CHIP BINS

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Peerless Mfg 20 Unit Bin  Chip Bin
Call for Price

 Portland, MT
Ellison Sales, Inc.
503-244-0161
Call

Peerless Mfg 14 Unit  Chip Bin

(2) 14 Unit Peerless Chip Bins Down and Ready to ship.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Unknown 21 Unit  Chip Bin
Call for Price

21 Unit Chip Bin

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Unknown 21 Unit  Chip Bin
Call for Price

21 Unit Chip Bin w/No Controls or Hydrayulic Power

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Unknown 21 UNIT  Chip Bin
$25,000

UNKNOWN 21 UNIT CHIP BIN (Clam-Shell): -- Specifications:Chips are discharged by (2) hydraulically operated Clam-Shell type bottom doors for a 78" x 96" free fall opening,Opening & closing via (2) 5" dia. double acting cylinders w/stroke of approx 48";Braced, wide flange steel beam support structure with 14' truck height clearance. -- Complete with:Weather covers, bin level indicator, operator's platform, upper catwalk w/handrail & (1) caged ladder.Unit holds (21) units or the equivalent of 4,200 cu. ft. by volume. -- Note:Controls & Hydraulic pump are NOT included with this unit.

Bill Christoffersen
800-374-5009 ext:365
Call

Unknown 30 unit  Chip Bin
Call for Price

30 Unit chip bin w/cyclone

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Unknown HI631  Chip Bin
Call for Price

HERCULES 2000 CAP MDL HI63-SP S/N01439

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Unknown Walking Floor  Chip Bin
Call for Price

Hydraulic Walking Floor Material Bin.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Unknown Flying Dutchmen  Chip Bin
Call for Price

APPROX 24' DIA DUST BIN W/FLYING DUTCHMAN BOTTOM UNLOADER W/CONTROLS & ELECTRICAL & 12" X 35' AUGER W/ELECT DRV (372). There is also an 8' Auger.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Unknown LoadingSys  Chip Bin
Call for Price

Chip Loading System w/ Air Lock 60hp. Chipper Pipes, Guards & Transition

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Unknown Walking Floor  Chip Bin
Call for Price

WApprox 10' x 40' Walking Floor Bin with Hydraulic Power Unit & Auger feeder at the End.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

US Metal Works 20 unit bin  Chip Bin
Call for Price

U.S. Metal Works truck bin, 20 unit chip bin Hydraulic pump/motor Dismantled in October 2020, and ready to load on truck at no charge in Toledo WA. 98591 Call for a price including freight Contractor that dismantled chip bin is available to re-install chip bin- customer will contact contractor directly for cost. Add 10” ( footing/peirs) to the legs in length to compensate for cutting chip bin legs flush to the top of the concrete pad, had to cut for dismantling.

 Toledo, WA
Machinery Scene
360-864-2800
Call

2021 US Metal Works 20 UNIT  Chip Bin
$64,500

(20) Units cap. Rapid Discharge Bin, prefabricated for nut & bolt erection, exterior constructed of 12 guage structurally reinforced steel. -- Chips are discharged by (2) hydraulically operated shell clamp type bottom doors for a 78" x 96" free fall opening, opening & closing via (2) 5" dia. double acting cylinders w/stroke of 48", 15 HP hydraulic pump motor with 20-gallon reservoir; braced, wide flange steel beam support structure with 14' truck height clearance. -- Complete with: Weather covers, (1) bin level indicator, embed plates w/detailed foundation plans, operator's platform, upper catwalk w/handrail & (1) caged ladder. - It holds (20) units or the equivalent of 4,000 cu. ft. by volume. - Price includes (1) coat of green primer for exterior & (1) coat of safety yellow for handrailing, ladders & guards. - Price does not include foundation, installation or starters & switches for electric motor. -- This is a representative photo - other sizes are available on application.

Bill Christoffersen
800-374-5009 ext:365
Call

Western Pneumatics 30 unit  Chip Bin
Call for Price

30 unit chip bin, Western Pneumatics truck bin Approximate measurements: 15ft inside width, 18ft long inside- 20ft long outside. Hydraulic pump,15hp, 230/460 volt Dismantling and installation available Ladder & platforms Cyclone, airlock, and fan sold separately Contact us for a delivered price. Additional photos and videos available

 Toledo, WA
Machinery Scene
360-864-2800
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved