Sawmill Equipment For Sale

SHBH500-2 - SMW Wood Shavings Machine - 2 Shafts, 8 Blades, Max Wood Size: 31 1/2"L x 19 1/2"W, Shaves 1/125"-1/64"D, 31 1/2"L Bucket, 1100lbs per hr, 14hp Motor, ~2100lbs. Also Available: SHBH500-4 - SMW Wood Shavings Machine - 4 Shafts, 16 Blades, Max Wood Size: 55"L x 19 1/2"W, Shaves 1/125"-1/64"D, 55"L Bucket, 2200lbs per hr, 31hp Motor, ~3950lbs. SHBH500-6 - SMW Wood Shavings Machine - 6 Shafts, 24 Blades, Max Wood Size: 55"L x 19 1/2"W, Shaves 1/125"-1/64"D, 55"L Bucket, 3600lbs per hr, 41hp Motor, ~4850lbs.

SMW 6K LB Forklift Diesel US motor, Liquid cooled but does not use DEF and Kohler Engine

MJH1000 - SMW Electric Horizontal Band Saw - Saws up to 39"dia, w/ Max 13 3/4"T x 14' 9"L, 27 1/2"dia x 2"-3"W Saw Blade, 29hp Motor w/ 2hp Up/Down & 2hp Forward/Backward Mortors, 19' 6"L and ~9925lbs. Also Available: MJH700 - SMW Electric Horizontal Band Saw - Saws up to 27 1/2"dia, w/ Max 13 3/4"T x 14' 9"L, 27 1/2"dia x 2"-3"W Saw Blade, 25hp Motor w/ 2hp Up/Down & 2hp Forward/Backward Mortors, 19' 6"L and ~9925lbs.

SMW Stationary Cut Off Saw Max cutting wood width 47.25in Max cutting wood length 19.7ft Motor Power 22hp

EG600E - SMW Double Blade Board Edger - Saws up to 2"-24"W x 3/8"-2 3/4"T, 2 14" Saw Blades, 65'-80'per minute feed, Dual 10hp motors. Also available: EG800E - Saws up to 2"-32"W x 3/8"-2 3/4"T, 2 14" Saw Blades, 65'-80'per minute feed, Dual 10hp motors. EG1000E - Saws up to 2"-39"W x 3/8"-2 3/4"T, 2 14" Saw Blades, 65'-80'per minute feed, Dual 10hp motors.

SMW Ultra Portable Horizontal Band Saw 26" cutting diameter, 10' cutting length, Max cutting thickness 19", Blade Size 12' 6" X 1 3/8", Machine length 13' 6", ~1100#, Packing Dimensions 7' 3" X 3' 3" X 5' 3". Available in 9hp Gas, 10hp Electric, or 8hp Diesel

SMW Multi Blade Rip Saw

SMW Horizontal Single Head Band Resaw w/Maximum Cutting Width 16", Maximum Cutting Thickness 4.5", Maximum Processing Thickness 8", Saw Wheel Diameter 24" and 20HP Motor

SHMF1500-800 - SMW Hammer Mill - 27 1/2" x 47 3" Feeding Inlet, 84 Hammer Blades, 3000rpm Blade Roll Speed, 3/4"- 2" Wood Processing Size, 6-8 Tons/hr, 295hp Motor, 4hp Cyclone Dust Discharge with Pipelines, 19' 6" Feeding Conveyor, 26' 3" Outlet Conveyor

MJ1300G - SMW Gas Powered Horizontal Band Sawmill-Wide Cut - Cuts up to 51"dia x 12"T x 14' 9"L, 27 1/2"dia Saw Blade, 1 1/2"-3 1/8"W Blade, 40hp Motor, Machine is 19' 6"L,and ~4850lbs. Also Available in Electric. Also Available: MJ1300E - SMW Electric Powered Horizontal Band Sawmill-Wide Cut - Cuts up to 51"dia x 12"T x 14' 9"L, 27 1/2"dia Saw Blade, 40hp Motor, Machine is 19'L,and ~2875lbs.

PE-50004 - SMW 4 Head Trim Saw - Cutting: 24"-16' 6"L x 3/8"-4 3/4"T x 3/8"-15 3/4"W, 4-18"dia Saw Blade, Each w/10HP Motor, ~490' per 8hr shift, ~5500#. Also Available As 5 Head - PE-60005 - SMW 5 Head Trim Saw - Cutting 24"-19' 6"L x 3/8"-4 3/4"T x 3/8"-15 3/4"W, 5-18"dia Saw Blade, Each w/10HP Motor, ~650' per 8hr shift, ~6600lbs.

DZ-450 - SMW Automatic Cut Off Saw - Cutting: 3/8"-4 3/4"H x 1"-8"W x 4"-8"T, 18"dia Saw Blade, 1/64" Cutting Tolerance, 4" Dust Collection Hole, 3000rpm Spindle Rotation Speed, 40 pieces/min, 16'-100' Feeding Speed, 6' 6"/13'/19' 6"L Feed Table, 47"L Discharge Table, Cylinder Press w/ 73"-102"psi, Schneider Electronic Components, Siemans PLC Touch Screen, 3 Phase 380V 50Hz, 1hp Servo Motor/11hp Cutting Motor. Also Available: DZ-600 - SMW Automatic Cut Off Saw - Cutting: 3/8"-5 1/2"H x 1"-12"W x 4"-12"T, 23 1/2"dia Saw Blade, 1/64" Cutting Tolerance, 4" Dust Collection Hole, 3000rpm Spindle Rotation Speed, 45 pieces/min, 16'-100' Feeding Speed, 6' 6"/13'/19' 6"L Feed Table, 47"L Discharge Table, Cylinder Press w/ 73"-102"psi, Schneider Electronic Components, Siemans PLC Touch Screen, 3 Phase 380V 50Hz, 1.5hp Servo Motor/15hp Cutting Motor.

PE-40003 - SMW 3HD Trim Saw - Cutting: 24"-13'L x 3/8"-4 3/4"T x 3/8"-15 3/4", 3 18"dia Saw Blades, Each with 10 HP Motor, ~320' per 8hr shift, ~4400#. Also Available in 4 Head and 5 Head.

New 2024 Sawmill World Horizontal Band Resaw 18" x 18" Cap w/2.25" Band

2024 Sawmill World Portable 2 Saw Edger Mdl EG6000 w/764CC Gas Engine, 2.75" x 24" Capacity, 9' Outfeed & 58" Infeed Mounted on Single Axle Trailer

2024 Sawmill World SH300 Air Defect Cut Off Saw with 13' Infeed Conveyor, 10' Outfeed Conveyor, 8" Processing Plank Width, 3" Processing Plank Thickness, 480V 7.5 HP Motor

Schneeberger 9 Sculptor Profile GrinderSwiss Made, Schneeberger Automated High Precision Grinder for Finger Joint, router bits, saw blades, straight and milling Cutters. Specifications -- Grinding Motor: 1,500 - 3,000 RPM. -- Cooling Pump: 2,800 RPM. -- Grinding Wheel Speed: 3,000 - 6,000 RPM. -- Grinding Wheel Diameter: 50 - 200 mm. Grinding Wheel Bore: 30 mm. -- Cross Travel of Grinding Wheel: 200 mm. Vertical Travel of Grinding Wheel: 400 mm. -- Grinding Head: Swivel-able. -- Worktable Travel: 400 mm. -- Coolant Capacity: 25 liters. -- Dimensions: 1,226 mm Lenght x 1,160 mm width x 1,180 mm height; Weight - 320 kG.10" Width cap., 11.5" dia., max. profile depth 5.5", radial clearance angle up to 35ø, lateral clearance angle up to 15øEquipped with & Features; -- 2 HP - 1,500 RPM motor, variable grinding speed 2,000 - 4,000 RPM, three sided full jet cooling. -- All std. grinding equipment for HSS grinding, 1-1/2" spindle arbor, (2) wheel flanges, (1) knife holder, dresser.

4"x 48" capacity. Electric drive on feed rollers. Incudes control panel. Air cylinders on press down rollers. Single arbor. 4-22" blades all movable. 4- laser lights. Lubrication system panel. 125 HP electric motor. 200-600V 180 amp soft start. Infee, outfeed roll case is loaded with what is needed, 10 HP. Hyd. pack CALL 740-799-7101 ext.2 This machine has moving parts that are not mentioned. It is loaded to run production.

6"x42" wide overall, includes infeed and outfeed rollers, working condition

Schurman Gang Saw Infeed Positioner