Boards Edger For Sale

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- Kohler 30 HP gasoline engine with electric start and including battery and fuel tank -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls, fixed and movable laser light.

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- 30 HP electric motor with 480 volt 3 phase magnetic starter included -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls

Miner B-53 STATIONARY Board Edger -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 14"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls -- Laser lights aligned with each saw

Morgan Scragg Mate Edger 20hp on Saw Arbors

Morgan 2 Saw Edger

Morgan Mini Champ 4 Saw Edger

1 with a return belt. 1 without lineshaft,no hyd. or air. Wheels in need of crowning but in working condition.Edger 4"x 36" 2 blade 1 movable 6'in & out deadroll,lineshaft working condition. You have the option to buy both resaws or just one. Joe Yoder 1741 Soldier Rd. Fort Scott, Kansas 66701

PHL Edger high speed 4 saw edger; Complete with the following features: --Independently shifted blades. --48″ opening. --2-3/4″ max cut depth. --125 HP Arbor Motor. --Operates up to 800 linear feet per minute. --Infeed Table and Outfeed Table with Picker and Hydraulic Power Unit. NOTE: Removed from service November 2015. Set up for transverse scanning. No scanner included.

Reckart 2 Saw Edger with 2 Movable & 3 Stationary Blades, Lazer Light Bridge and Infeed Roll Case

Salem 2 Saw Edger S/N 152747-92 with Infeed Roll Case

Features 2 equidistant shifting saws ball bearing shifting collars Temposonic hydraulic linear positioned saws Knurled and chromed feed rolls blade access on left belt tailing device dead roll infeed Programmable push button controls and jog to position controls arbor motor hydraulic unit

Variable feed speed up to 100fpm with powered infeed and outfeed belts. Very accurate with quick adjust to edge 3 1/2" boards to 16" boards with 1/8" increments. Cuts up to 2 1/4 height and will pass up to 30" wide flitches. Single or 3 phase electric. 10hp on blades / 1hp on feedworks. Optional tables on infeed and outfeed. Call (318)994-2116

EG600E - SMW Double Blade Board Edger - Saws up to 2"-24"W x 3/8"-2 3/4"T, 2 14" Saw Blades, 65'-80'per minute feed, Dual 10hp motors. Also available: EG800E - Saws up to 2"-32"W x 3/8"-2 3/4"T, 2 14" Saw Blades, 65'-80'per minute feed, Dual 10hp motors. EG1000E - Saws up to 2"-39"W x 3/8"-2 3/4"T, 2 14" Saw Blades, 65'-80'per minute feed, Dual 10hp motors.

2024 Sawmill World Portable 2 Saw Edger Mdl EG6000 w/764CC Gas Engine, 2.75" x 24" Capacity, 9' Outfeed & 58" Infeed Mounted on Single Axle Trailer

2024 Sawmill World Wide Double Blade Edger w/Setworks

Schurman 6TA48 Combination Edger SN: 2121 3 phase 480 volt (2) 200 HP motors

Timber King T-802 Edger -22hp Kubota diesel engine -2 blades -Built in metal skids Works as it should!!!!

2x21 bd. Edger. 2 blade 1 movable, with another spacer. Infeed & outfeed belt with pressdown roller. 20 HP gas motor. In Good working condition. Write Riverside Hardwoods 663 McAtee Rd. Cadiz,KY. 42211 Call 270 522 3438

Chipping Edger I/F O/F

2 Saw Edger 20 HP 3 Phase