Sawmill Equipment For Sale

Ingersoll-Rand Model 3000, 3 Cylinder, 30hp Air Compressor

Ingersoll-Rand Model 3000, 3 Cylinder, 25hp Air Compressor

Ingersoll-Rand Model 3000, 3 Cylinder, 20hp Air Compressor

Ingersoll-Rand SS3, Vertical Mount, Contractor Series, Air Compressor

Ingersoll-Rand 30hp 200 gallon Air Compressor, horizontal tank.

Ingersoll-Rand Mdl# SSR-EP30U 30Hp Rotary Screw Compressor

Ingersoll-Rand Mdl# T-30 Tank Mounted Air Compressor Pump w/No Motor

INGERSOLL-RAND UP6-15C-125 15 HP Single-Stage Horizontal Tank-Mounted Rotary Screw Air Compressor, with 2,313 Hrs. (as of 2/16/24)Specifications: -- Cap. 55 CFM, Max. pressure 125 PSI. -- Pump speed 6,250 RPM. -- Sound level 69 dBA. Equipped with: -- High efficiency close coupled air end. -- Motor shaft-mounted centrifugal blower. -- Electronic stepper motor inlet air control. -- 2-Stage Air-cooled aftercooler. -- Total positive lubrication system, with Spin-on filter. -- Compartmentalized sound enclosure.Complete with: -- 80 Gallon Cap. 24"; Dia. x 33"; L Horizontal Air Receiving Tank.

INGERSOLL RAND SSR-EP30SE Rotary Screw CompressorSpecifications: -- 30 HP Motor, approx. 120 CFM @ 125 PSI, totally integrated package, single stage rotary screw air end, max. modulate pressure 128 PSI; full sound enclosure keeps noise levels below 75 dBA.Features: -- "Intellisys" Microprocessor based control system, premium instrument panel, air-to-air 2-stage after-cooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter.Control system includes: -- Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns.(23,069) Total operating hours.

INGERSOLL RAND - UP6-15C-150, ...ROTARY SCREW AIR COMPRESSOR & Horizontal TankSpecifications: -- 15 HP Motor, 55 CFM @ 125 PSI; totally integrated package, single-stage rotary screw air-end; max. modulate pressure 125 PSI. -- Full sound enclosure keeps noise levels below 75 dBA. Standard Features Include: -- Instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control. -- Sealed SSR direct drive gear train; total positive lubrication system with spin-on filter. -- Mounted on horizontal tank.. (28,000) Total operating hours.

Ingersoll-Rand screw compressor, 50 hp electric power, approx 225 CFM, good operating condition

Ingersol-Rand Pac-Air screw compressor, 125 hp electric motor, not tested but appears good

INOTECH 200 HP DUAL BOX SHAVING MILLSpecifications for one system: -- (2) 100 HP Motors -- (2) Boxes 48" x 106" -- (2) Cutter Heads 48" Long with 10 Knives Each -- (2) Slide Out Modules for Maintenance of Knives Cutter Head -- Production Capacity up to 2,000 cu./ft. per hour -- In a Very Good Working Condition -- Loaded on your Truck(2) Complete Systems Available.Price is for one Unit unless otherwise stated.

Inovec Positioning & Control System. 30hp Electric / Hydraulic Power Unit to Run Log Knees with Salem Computerized Networks S/N 195839-03

INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL TITAN-60-EC Full Eject Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8" -- Main motor: 20 HP -- Feed opening: 58"; x 35"; -- Bale Size: 60"; x 48"; x 30"; -- Feed conveyor width: 48" -- Ram face pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Cycle time: 32 Sec (14 Sec short stroke)Equipped with: -- Programmable controller with Ethernet -- Conveyor controls and conveyor hopper

INTERNATIONAL TITAN 6-EC Closed Door Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8"; -- Motor: 20 HP -- Cycle time: 32 Sec Cycle Time -- System pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Ram face pressure: 87 PSI -- Feed opening: 58"; x 35"; -- Bale size: 60"; x 48"; x 30"; Equipped with: -- Feed conveyor: 48" wide -- Programmable controller -- Ethernet connection

INTERNATIONAL - TITAN-60-EC, Wide-Mouth Closed-Door Horizontal BalerSpecifications: -- Cylinder: 8" -- Feed opening: 56" x 40" -- Main motor: 30 HP -- Max. ram force: 175,929 LbsEquipped with: -- Ethernet MICROLOGIC 1100 PL Controller -- Regen Hydraulics -- Adjustable serrated shear blade -- Tongue & Groove floor -- AR 400 Floor Plate -- Conveyor controls and conveyor hopper