Portable Sawmills For Sale
Category
Portable Sawmills
35 Results Found
MEADOWS MILLS 100H CHAIN LOG TURNER -- Hydraulic Cylinders: One 2" x 12" with 1 1/2" rod -- Turning Chain: #100 chain with 3/4" dog width and 13 bits -- Drive: H60TB13 sprocket with bushing, H60SDS25 sprocket with bushing, #60 drive chain, and chain guard -- Drive Shaft: 1 11/16" diameter 1018 cold roll -- Idler Shaft: 1 11/16" diameter 1018 cold roll -- Frame: Base constructed from 3" x 4" tubing, uprights constructed from 8" channel and 4" channel, head frame constructed from 3" x 4" x 3/8" angle and various flat bar -- Drive Motor: Charlyn 103-1032 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 10 gpm & 950 psi -- Controls: not included in base price
MEADOWS MILLS 120H Chain Log TurnerSpecifications: -- Hydraulic Cylinders: Two 2" x 12" with 1-1/2" diameter rod -- Turning Chain: #120 chain with 1" dog width and 13 bits -- Drive: H80TB13 sprocket with bushing, 80Q25 sprocket with bushing, #80 drive chain, and chain guard -- Drive Shaft: 2-3/16" diameter 1018 cold roll -- Idler Shaft: 2-3/16" diameter 1018 cold roll. Construction: -- Frame: Base constructed from 10" x 25.4 Lbs beam, feet constructed from 4" x 6" tubing, head frame: Constructed from 8" x 3" x 4" tubing -- Drive Motor: Charlyn 104-1253 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 12 GPM & 950 PSI -- Controls: not included in the base price
2000 Polvson Wide Band Sawmill - Cap 36" x 25' - Isuzu 75 HP Diesel Engine with approx 1500 hours - Fully Hydraulic - No Set-works - Built in 3 blade edger on the machine that works but the belts are disconnected. 2 blades are moved hydraulically and one is manually adjusted. - Uses 21’6” long blades, 4-6” wide, 19 gauge, 1-3/4” tooth spacing - Armstrong No.2 bandsaw sharpener included - Includes 9 blades, 4" -6" wide and 7 Wood-Mizer new blades- 3" wide Call 800-459-2148 for more info.
2013 or 2014 TimberKing 1400 - Portable - 27 HP Kohler gas engine - Cap 32" x 20' - Hydraulic up and down - Clutch - 4 Retractable stops - Chain Log Turner - Winch Log Loader - Ramps - Taper Jack Call 800-459-2148 for more info. Price Reduced
$ 21,000
Timberking 1400 - 23.5 HP Kohler Command HP gas - Approx 400 - 500 hours - Portable - Can demonstrate as still in operation Call 800-459-2148 for more info.
Good-running, good-cutting Timbering 2200, Serial #xxx1171 originally shipped in October of 2017, Has 2,212 hours on its Tier 3 Kubota 48.9HP Diesel engine, The mill runs and cuts well, has new belts all around, new oil and filters, new hydraulic fluid and filters, a new debarker motor and new battery, Price on a new 22-series mill with debarker would be $85,890 with an eleven month lead time. Asking price on this mill $69,995.That means you save $15,895 off the new mill price...and get the mill right now! Also have 2 boxes of new blades. Call 800-459-2148 for more info.
2016 Timberking 2200 Sawmill -Less than 600 hours -49hp Kubota diesel engine -About 40 blades come with mill. -Very good sawmill runs and operates as it should -All hydraulics
VICKERS - 60 HP, ...Hydraulic Power PackHydraulic Power Pack with all the bells and whistles: VICKERS Pump & valves and a SENTINEL tank. Hydraulic Power Pack Includes -- Variable volume, pressure compensated, piston pump. -- Capacity: 8 Cu. in./rev. -- Pressure rating: 4,000 PSI. -- Driver: 60 HP Electric motor; 1,750 RPM. -- Reservoir: 200 Gal. -- Kidney Loop: Gear pump w/filter. -- Air-cooled Heat Exchanger. -- Return line filter. -- Liquid lever switch and temperature switch. -- Fluid inspection window.NOTE: This item was installed earlier but never used. Year of manufacturing is approximate.
$ 90,000
This Wood-Mizer LT-70 Super Hydraulic Wide comes with a 55hp diesel engine with ONLY 60 hour on it! It has always been kept under cover and has been very well maintained by the Woodmizer dealer in Newnan, GA. This unit comes with the pedestal control station w/fully proportional joystick controls allowing the operator to be positioned anywhere to control all head & bed functions. It also has a de-barker, Lube-Mizer and 6 box of blades. This Sawmill is ready to go to work! Call 423-405-8280 for more info or to make an offer. [email protected]
$ 39,000
Wood-Mizer LT300 with enclosed cab and heat and air. 16' Log deck. Lumber Belt conveyor. Approx 50 new blades and 50 used blades. Manual/Parts book. Call 800-459-2148 for more info.
2006 Wood-Mizer LT40 Super Hydraulic - 51 HP CAT Engine - 6300 Hours - Debarker - Lube Mizer - Accuset 2 Setworks - Engine starts immediately - Recent Service - Engine Cover Call 800-459-2148 for more info.
Year 2000, 2670 total hr. hours will probably go up yet, 38 hp Kohler gas engine, Only 1000 hr. since new, setworks, debarker, Lubmizer, 50 sharp blades, 4 gas tanks, Owners manuals for everything, Call 717-423-0010 for more info.
2001 Wood Mizer LT40 Super Hydraulic, Wood Mizer LT40 Super Hydraulic with re-saw attachment with setworks, Replaced the hydraulic motor for the re-saw and replaced the guides. 25HP Electric Motor. Road ready. Can be switched to portable power - costs around $4000-$5000 from Wood-Mizer. Call 800-459-2148 for more info.
Fully Hydraulic, Wide increases max width of cut to 34", Diesel engine with 1800 hours, Portable, Debarker (not connected), Lubemizer, Fine Adjust Legs, Remote Operating Station, Cap: 36” log diameter, 21’ log length, and production up to 675 bf/hr. Call 800-459-2148 for more info.
Wood-Mizer LT40 Hydraulic Band Sawmill, Portable, Debarker, Lubemizer, Serviced in November 2023, very little use, 2005, CAT Diesel Engine 37 HP, 991 hours. Call 800-459-2148 for more info.