Sawmill Equipment For Sale

Band Mills (Wide) (41) Band Mills (Thin Kerf) (54) Debarkers (79) Edger-Boards (63) Forklifts (44) Gang Saws (53) Hogs and Wood Grinders (246) Log Loaders (1) Portable Sawmills (31) Resaws-Band (165) Scragg Mills (36) Trim Saws (83) Unscramblers (33) Wheel Loaders (94) Wood Chippers - Stationary (143)
Air Compressors (157) Airlocks (24) Banding-Strapping Machines (139) Blowers and Fans (131) Boilers (24) Bolter Saws (1) Carriages (Sawmill) (29) Carriage Drives (Sawmill) (57) Chip Bins (18) Chip Cyclones (22) Chip Screens (40) Chipping Canters (3) Chop Saws (65) Circular Saw Husks (9) Circular Sawmills (79) Conveyors (81) Conveyors Board Dealing (80) Conveyors Deck (Log Lumber) (205) Conveyors General (30) Conveyors-Auger (5) Conveyors-Live Floor (10) Conveyors-Run-Around (4) Conveyors-Vibrating (53) Conveyors Belts (206) Conveyors-Barn Sweep (24) Conveyors-Live Roll (119) Dip Tanks (4) Drum Dryers (20) Dry Kilns (49) Dump Hoppers (8) Dust Collection Systems (263) Edger Tailing Devices (6) Edgers-Gang (45) Edgers-Slab (6) Edgers-Vertical (5) Electrical (157) Fuel Tanks (2) Gang Rip Saws (115) GenSets (29) Hammer Mills (6) Hydraulic Power Packs (94) Knife Grinders (35) Laser Lights (8) Log Home Machinery (14) Log Merchandising Systems (13) Log Turners (Sawmill) (35) Lumber Carts (20) Lumber Sorters (9) Lumber Stackers (27) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (36) Misc (91) Operator Cabs (32) Package Saws (1) Parts and Parts Machines (9) Plywood OSB and Panel Boards (3) Post and Pole Peelers (21) Power Units-Engines (9) Radial Arm Saws (27) Resaws-Circular (2) Scanning Systems (1) Scissor Lifts (54) Screening Systems (10) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (116) Shavings Mills (21) Slab Saws (13) Stake Pointers (1) Step Feeders (3) Straight Line Rips (2) Tie Processings (1) Tilt Hoists (16) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 71 of 190
3781 Results Found
Sort By 
Recently Added Items
1998 Summit PR-9S
Call For Price
1998 Summit PR-9S
2022 Riehl Steel 2ohp
$12,500
2022 Riehl Steel 2ohp
Caterpillar 3304
$20,000
Caterpillar 3304
Unknown
$12,500
Unknown
Call for Price

MATH-EX (6) Position (Person) Basic Recycling Sort Line Specifications: -- 16 Feet x 32" Inclined feed conveyor with 48" high hopper and 2" high cleats @ 36" centers. -- 36 Feet x 32" Sort conveyor with infeed transition guides and Belly rest skirt one side. -- Sort platform with OSHA stair and handrail. -- (6) Sort chutes with 52" of clearance. -- 1-1/2 HP, 460 volt, 3-phase drives. -- (2) VFD Controllers mounted in control panel -- Pedestal style stand. -- Emergency pull cord stop or-E-stop for sort conveyor -- Motor wire and flex conduit for (2) conveyors shipped loose. -- (1) 6" Diameter Ceramic Drive Pulley -- (1) Stainless steel Back ChuteOptional Equipment: -- (2) VFD Controllers mounted in control panel -- Pedastal style stand -- Emergency pull cord stop or E-Stops for sort -- More wire and flex conduit for (2) conveyors

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

MATH-EX (6) PERSON BASIC RECYCLING SORT LINE -- 16 Feet x 32" Inclined feed conveyor with 48" high hopper and 2" high cleats @ 36" centers. -- 36 Feet x 32" Sort conveyor with infeed transition guides and Belly rest skirt one side. -- Sort platform with OSHA stair and handrail. -- (6) Sort chutes with 52" of clearance. -- 1-1/2 HP 460 volts 3 phases drives. -- (2) VFD Controllers mounted in control panel -- Pedestal style stand. -- Emergency pull cord stop or-E-stop for sort conveyor -- Motor wire and flex conduit for (2) conveyors shipped loose. -- BRAND NEW WITH WARRANTY -- ALLOWS 7 TO 8 WEEKS DELIVERY -- LOADED ON YOUR TRUCK

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

MATH-EX 4-Position (Person) Basic Recycling Sort Line Specifications: -- Slider bed belt conveyor: Model 600, Style B. -- Frame construction: 10-auge, bolt together. -- Pulley diameter: 6" Dia. -- Conveyor length: 16'. -- Angle of incline: 25°. -- Effective width: 32". -- Belt: Black PVC 120 COS. -- Endura-cleat: 2" High @ 48" centers. -- Side skirts: 12" High (tob), 12-gauge. -- Belt return: Bottom pans. -- Belt speed: 60 FPM. -- Drive mount/side: Shaft mount, right-hand side. -- Motor: 1 HP, 460 V, 3-Ph. -- Live load capacity: 394 Lbs. (fixed speed). -- Controls: Start/Stop control - (2) e-stops - mounted and wired. -- Infeed height: 0" BOF. -- Discharge height: 83" BOF. -- Supports: provided.Included Features: -- Black side guides -- Bottom pans. -- Infeed hopper. -- Transition guides.Overall floor-length: 174" (end to end).Approximate shipping weight: 1,876 Lbs (includes platform and controls.) Plus packaging.

Katie Lechelt
800-374-5009 ext:452
Call

$ 45,323

MATTEI OPTIMA 30, 40 HP Variable-Speed Rotary Vane Compressor (89-189 CFM @ 102-145 PSIG)RELIABLE ROTARY VANE AIRENDSThe inverter adjusts the motor’s rotational speed, adapting the air delivered by the compressor to the actual air demand. OPTIMA can save up to 35% of the annual operating costs. Ideal for automotive, commercial and industrial applications.Features: -- MATTEI Optima Series Air Compressors quiet cabinet constant-duty Rotary Vane Compressors feature an inverter to match their operation to suit the load profile required by the compressed air system to ensure maximum energy savings under varying air demands.Equipped with: -- 40 HP TEFC motor, 89-189 CFM @ 102-145 PSIG; MaestroXS microprocessor control and protection system, AC inverter, premium efficient TEFC motors, quiet acoustic enclosure, air-cooled aftercooler, intelligent timed electronic condensate drain and separator kit and are filled with Mattei Rotoroil 8000 F2 synthetic oil; 2" NPT outlet.Includes: -- “W"; Version includes water-cooled oil and after cooler, add;...$ 1,463

Jim Reedy
800-374-5009 ext:455
Call

$ 35,971

MATTEI ERC 1030L, 40 HP Rotary Vane Compressor (154 CFM @ 125 PSI)Features: -- No wear on compressor's moving mechanical parts; pulse-free air; low oil volume and consumption. -- Direct-coupled compressor and motor; slow 1,800 RPM; compact, quiet design - 81 dB (A) in an open-frame design.Equipped with: -- Bearingless air-ends - rotor stator unit (RSU) is the rotor which is simply supported by two (2) white metal Babbitt bushings that routinely deliver >100,000 hours of life. -- 40 HP ODP motor; 154 CFM @ 125 PSIG; air cooled aftercooler with 18°F approach temperature, 3-stage oil separator produces 3 ppm in compressed air. automatic drain valve; cleanable filter.Complete with: -- Efficient oil injection system guarantees a perfect holding among the moving parts, cooling and lubrication. An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades. -- Automatic load/no load, load matching modulation, automatic with modulation; 1" dia. air outlet.

Jim Reedy
800-374-5009 ext:455
Call

$ 25,555

MATTEI ERC 1018L, 25 HP Rotary Vane Compressor (105 CFM @ 125 PSI)Features: -- No wear on compressor's moving mechanical parts; pulse-free air; low oil volume and consumption. -- Direct-coupled compressor and motor; slow 1,800 RPM; compact, quiet design with 81 dB (A) in an open-frame design.Equipped with: -- Bearingless air-ends; rotor stator unit (RSU) is the rotor which is simply supported by (2) white metal Babbitt bushings that routinely deliver > 100,000 Hours of life. -- 25 HP ODP Motor; 105 CFM @ 125 PSIG; air cooled aftercooler with 18° F approach temperature'; 3-stage oil separator produces 3 PPM in compressed air, automatic drain valve; cleanable filter.Complete with: -- Efficient oil injection system guarantees a perfect holding among the moving parts, cooling, and lubrication. -- An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades. -- Automatic load/no load, load matching modulation; automatic with modulation; 1" dia. air outlet.

Jim Reedy
800-374-5009 ext:455
Call

$ 13,176

MATTEI ERC 507L 10 HP Rotary Vane Compressor (43 CFM @ 125 PSI)Features: -- No wear on compressor's moving mechanical parts; pulse-free air; low oil volume and consumption. -- Direct-coupled compressor and motor; slow 1,800 RPM; compact, quiet design - 77 dB (A) in an open-frame design.Equipped with: -- Bearingless air-ends - rotor stator unit (RSU) is the rotor which is simply supported by two (2) white metal Babbitt bushings that routinely deliver >100,000 hours of life. -- 10 HP ODP motor; 43 CFM @ 125 PSIG; air cooled aftercooler with 18°F approach temperature, 3-stage oil separator produces 3 ppm in compressed air. automatic drain valve; cleanable filter.Complete with: -- Efficient oil injection system guarantees a perfect holding among the moving parts, cooling and lubrication. An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades. -- Automatic load/no load, load matching modulation, automatic with modulation; 1" dia. air outlet.

Jim Reedy
800-374-5009 ext:455
Call

$ 14,164

MATTEI BLADE 4 LX-TM-SE, 5 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (20.4 CFM @ 115 PSIG). RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 5 HP TEFC motor, 20.4 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

Jim Reedy
800-374-5009 ext:455
Call

$ 15,353

MATTEI BLADE 5 LX-TM-SE, 7.5 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (31.8 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bush on the back and now an oversized radial ball bearing on the front to address the side load created by the belts.MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 7.5 HP TEFC motor, 31.8 CFM @ 115 PSIG; full-voltage motor starter, air-cooled After Cooler. -- MAESTRO XB Controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 120-Gallon ASME Air Receiver Tank. -- Refrigerated Air Dryer. -- Pressure Gauge, Safety Valve, Filter, Oil Separator.

Jim Reedy
800-374-5009 ext:455
Call

$ 16,554

MATTEI BLADE 7 LX-TM-SE, 10 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer ( 39 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 10 HP TEFC motor, 39 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

Jim Reedy
800-374-5009 ext:455
Call

$ 19,547

MATTEI BLADE 11 LX-TM-SE, 15 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (65 CFM @ 115 PSIG).RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with "exclusive Meehanite® iron blades", designed to last 100,000 hours.Features: -- MATTEI "BLADE Series" Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 15 HP TEFC motor, 65 CFM @ 115 PSIG; full-voltage motor starter. -- Air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models. -- MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 120-Gallon ASME Air Receiver Tank. -- Refrigerated Air Dryer. -- Pressure Gauge, Safety Valve, Filter and Oil Separator.

Jim Reedy
800-374-5009 ext:455
Call

$ 22,533

MATTEI BLADE 18 LX, 25 HP Direct-Drive Rotary Vane Compressor (112 CFM @ 116 PSIG)Direct-Drive Air Compressors combine legendary vane technology with traditional shaft-to-shaft coupling to provide industry leading performance at affordable prices. As quiet as 66 dB(A), all models turn at a slow 1,800 RPM. -- Equipped with: 25 HP Premium efficient TEFC motor; Wye-delta starter; quiet acoustic enclosure, 67 dB(A); air-cooled after cooler; protection system MaestroXS. -- Features: MAESTRO XB controller with expansion module allowing real time clock and daily/weekly programming, Continuous and Automatic operating modes with standard load/unload operation on all models, moisture separator & zero-loss electronic condensate drain (shipped loose); phase reversal protection; network ready. -- Includes: (3) Year parts warranty, (10) years on Air-End. Add Optional Refrigerated Air Dryer AC-300295

Jim Reedy
800-374-5009 ext:455
Call

$ 33,602

MATTEI BLADE 22i, 30 HP Direct-Drive VSD Rotary Vane Compressor (71 - 112 CFM @ 102 - 145 PSIG)Direct-Drive Air Compressors combine legendary vane technology with traditional shaft-to-shaft coupling to provide industry leading performance at affordable prices. As quiet as 66 dB(A), all models turn at a slow 1,800 RPM.Equipped with: -- 30 HP Premium efficient TEFC motor; VSD Drive; quiet acoustic enclosure, 67 dB(A); air-cooled after cooler; protection system MaestroXS. -- Features: -- MAESTRO XB controller with expansion module allowing real time clock and daily/weekly programming, Continuous and Automatic operating modes with standard load/unload operation on all models, moisture separator & zero-loss electronic condensate drain (shipped loose); phase reversal protection; network ready. -- Includes: -- (3) Year parts warranty, (10) years on Air-End.

Jim Reedy
800-374-5009 ext:455
Call

$ 2,914

MATTEI MNC 0055 Refrigerated Air Dryer (55 SCFM).MNC Series non-cycling dryers run continuously and control the refrigerant gas to maintain dew point keeping your air system free of water. Theyare the most cost effective method for applications where the ambient temperature remains above freezing.Features: -- Simple Microprocessor-based control provides dew point, temperature, functionality monitoring and time drain control. -- Equipped with: -- Removable cabinet for easy access to internal components; moisture dewpoint indicator and automatic condensate drain. -- Nominal Cap. based on 100° F ambient temperature; 100° F inlet temperature; 100°F, inlet pressure 100 PSIG. -- Max. Ambient temperature: 122°F°; Max. inlet temperature 158°F; min. ambient temperature 41°F (5°C); max. inlet pressure 203 PSIG (14 Bar G). -- Includes: Refrigerant: R134A; 3/4" NPRT-F Connection; .47 Kw.

Jim Reedy
800-374-5009 ext:455
Call

$ 3,880

MATTEI MNC 0110 Refrigerated Air Dryer (110 SCFM).MNC Series non-cycling dryers run continuously and control the refrigerant gas to maintain dew point keeping your air system free of water. Theyare the most cost effective method for applications where the ambient temperature remains above freezing.Features: -- Simple Microprocessor-based control provides dew point, temperature, functionality monitoring and time drain control. -- Equipped with: -- Removable cabinet for easy access to internal components; moisture dewpoint indicator and automatic condensate drain. -- Nominal Cap. based on 100° F ambient temperature; 100° F inlet temperature; 100°F, inlet pressure 100 PSIG. -- Max. Ambient temperature: 122°F°; Max. inlet temperature 158°F; min. ambient temperature 41°F (5°C); max. inlet pressure 203 PSIG (14 Bar G). -- Includes: Refrigerant: R134A; 1" NPRT-F Connection.

Jim Reedy
800-374-5009 ext:455
Call

$ 7,234

MATTEI MNC 250 Refrigerated Air Dryer (250 SCFM).MNC Series non-cycling dryers run continuously and control the refrigerant gas to maintain dew point keeping your air system free of water. Theyare the most cost effective method for applications where the ambient temperature remains above freezing.Features: -- Simple Microprocessor-based control provides dew point, temperature, functionality monitoring and time drain control. -- Equipped with: -- Removable cabinet for easy access to internal components; moisture dewpoint indicator and automatic condensate drain. -- Nominal Cap. based on 100° F ambient temperature; 100° F inlet temperature; 100°F, inlet pressure 100 PSIG. -- Max. Ambient temperature: 122°F°; Max. inlet temperature 158°F; min. ambient temperature 41°F (5°C); max. inlet pressure 203 PSIG (14 Bar G). -- Includes: Refrigerant: R134A; 2" NPRT-F Connection. Also available in 230 volts, 1-Phase.For reliable operation and to meet warranty conditions, a prefilter must be installed. -- MF1-0339-1.5GNPT Prefilter add; ...$ 853, to be piped in front of the dryer. -- MF2-0339-1.5GNPT Afterfilter add; ...$ 853, to be piped after the dryer (prevents oil buildup in the tubes and keeps the condensate drain cleaner).

Jim Reedy
800-374-5009 ext:455
Call

$ 60,316

MATTEI OPTIMA 45, 60HP Variable-Speed Rotary Vane Compressor (102-145 CFM @ 102-145 PSIG)RELIABLE ROTARY VANE AIRENDSThe inverter adjusts the motor’s rotational speed, adapting the air delivered by the compressor to the actual air demand. OPTIMA can save up to 35% of the annual operating costs. Ideal for automotive, commercial and industrial applications.Features: -- MATTEI Optima Series Air Compressors quiet cabinet constant-duty Rotary Vane Compressors feature an inverter to match their operation to suit the load profile required by the compressed air system to ensure maximum energy savings under varying air demands.Equipped with: -- 60 HP TEFC motor, 102-145 CFM @ 102-145 PSIG; MaestroXS microprocessor control and protection system, AC inverter, premium efficient TEFC motors, quiet acoustic enclosure, air-cooled After Cooler. -- Intelligent timed electronic condensate drain and separator kit and are filled with Mattei Rotoroil 8000 F2 synthetic oil; 2" NPT outlet.

Jim Reedy
800-374-5009 ext:455
Call

$ 29,500

MAX-PAK - HOE-2850-308AR, ...Horizontal Open-End Auto-Tie BalerSpecifications: -- Bale size: 30″ x 42″ x 72″ (variable) -- Bale weight: Up to 1,400 Lbs -- Cycle time: 15.23 Seconds -- Motor: 30 HP -- Cylinder bore: 8″ -- Rod: 5-1/2″ -- Stroke: 70" -- System pressure: 3,000 PSI -- Platen force: 143,256 Lbs - 120.49 PSIFeatures: -- Automatic Wire Tie System -- Heavy wall tubular steel frame -- AR 400 floor and platen -- Hydraulic regenerative circuit and air/oil cooler -- NEMA 12 Electrical panel and Control System -- Conforms to: OSHA &ANSI Z245.5 Standards

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

MAXPAK - HCE60-FE-9: Horizontal Closed Door Baler -- Main Cylinder: 9". -- Motor: 50 HP. -- Full Eject. -- Bale sizes: 60"; x 30"; x 48"; .

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

MAX-PAK - MP6020-7: Vertical Baler -- Motor: 15 HP. -- Variety of Bale materials: Cardboard; shredded newspaper; aluminum cans; P.E.T. plastics. -- Bale size: 30″ x 48″ x 60″. -- Max. Bale weight: 1,300 Lbs shredded ONP; 1,200 Lbs for OCC.

Katie Lechelt
800-374-5009 ext:452
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved