Sawmill Equipment For Sale

The HCD2M 250 Double Arbor Gang Saw is designed for cutting timbers with a thickness of 9-3/4" and 27-1/2" wide Saw arbors are fixed. Hydraulic feed with knurled rolls top press roll is adjust hydraulically. Cutting rate is 65' per minute. For more information call Jackie Kittrell 931-698-3342 - 931-797-6284

This mighty bull gang edger is ready for work. Cutting 6.25" X 27.5" cuts down to 1/2" boards. This 100 HP single arbor machine has diamond circular saws, Single saw arbor is fixed. Hydraulic feed through with hydraulic top press roll. Infeed table with hydraulic feed roller and fence for accuracy in sawing. This machine is available in a double arbor machine which will cut a little faster than the single. This saw has (2) 50 hp independent arbor motors for the double arbor machine. See it at IWF in August 2024 or order yours today. 931-698-3342

HTPM 250 Machine chips small logs with right and left chipping heads and profilers in one pass the HPM 250 goes behind this chipping module to maximize use of the roughest logs to make good lumber See pictures to see one in production.

This edger is designed to cut cants and boards with max of 4-1/2 in height There are 3 saws with 2 shifting saws. Hydraulic feed with knurled feed rolls. Indeed top press roll is hydraulic comes with motor & PLC controls and joy stick controllers Call Rachel 931-698-3342

4 saw edger with 3 movable saws and saw auto lube system with PLC joy stick controller. Adjustable for 4-3/4" material hydraulic cylinder saw position station Hydraulic feed through comes with motor and PLC control cabinet. Buy and Conveyors with jump up chains available as well. Special Deal Laser Lights and saws will be on this machine only and included in the price call 931-698-3342 Jackie Kittrell

HYM 350 Hydraulic Horizontal Slab Reclaim Saw with operator controls (2) 40 HP motors cuts boards as short as 48" X 4-3/4 to 13-3/4 wide X 1/2 to 4-3/4 thick. This might slab saw will produce boards from slabs that would normally go to the chipper. Reclaim and pay for this mighty saw

this mighty slab saw is compact and can cut singles and doubles. Saws adjust with the touch of a control. Horizontal set up and each independent arbor holds 2 saws and has its own motor for faster recovery for doubles. Air press roll on infeed with fence Hydraulic side feed roll includes motor controls and PLC controls. 60 HP motor Ready to hook to your 440 Volt power Just need a single slab saw? Look at the Akkuslar HYM 350 Call 931-797-6284

This machine is designed for cutting a max height of 4"X 27-1/2 holds up to 6 saws and can be used for a Multi Gang Rip as well.

This beefy mighty machine is perfect for cross ties and custom timbers, and pallet and lumber cants. Single cut or double cut side boards. Excellent log turner with sharp chain feed through for lengths up to 60' special order. Operators controls Nice tailing device with center press roll section for timbers/ cants and ties. Quality and performance with every cut. Simple operation and maintenance. Call Kittrell Sawmill Brokers 931-698-3342

Log head saw cutting system. It is designed to cut logs using your favorite carriage with a diameter range of 6" to 27.3/4" cutting process is provided with maximum precision with two fixed strobe circular saw. That's back and forth on the track this is a double cut head rig. (2) 60 HP motors run 60' per minute. The saw pictured here was a trade in and will be retrofitted at the factory. Call 931-698-3342

This 4 saw 16' x 6" multi saw trimmer will easily cut boards and cants in a multi cut product or simply double end trim. Fixed saw precision end cuts the lumber and 3 movable saws are easily adjusted with a slide and lock motion. Independent saw motors with 5.5 KW or about 7.5 hp motors. Quality and Performance in every cut simple handling, operation and maintenance. Call Kittrell 931-797-6284

Turn out 90MBF in cross and switch ties daily. This quad scragg will cut 6” to 13.7" logs 5’ to 20’ (extensions available)depending upon design of the machine. log Turner infeed 4 independent arbor saws. Hydraulic Sharp Chain Feed Through..... outfeed with can't/rail tie feed through and board separation tailing device. Quality , performance in every cut Simple handling, operation and maintenance. This machine is in stock and has a complete set of new saws and is ready to load Up to 200 HP total saw power depending upon application includes MCC and PLC. Deluxe operator console with chair. Purchase now machine is in stock Great for making cants and crossties as well as lumber with the 220 Gang (in Stock) or the 160 bull edger behind it. infeed and drop out transfer decks just add $95,000 for all 3 conveyors super deal save $83,000 today Call Jackie 931-698-3342

(2) ALJON - 580CL, ...Car Logger BalersLot of (2) Logger Balers: (1) In good working condition and (1) for parts or repair.10' x 19' Chamber and "L-Box" design, swallows vehicles as large as full-size Vans with ease.Specifications: -- Open Chamber: 19-1/4' x 10.1' x 3.6' -- Bale size: 40" x 25" x Variable -- Production: (20 - 25) Per hour -- Scrap metal productions: (17 - 20+) Metric tons/hour. -- Power unit: Diesel EngineFeatures: -- "L-Box" designNOTE: The Baler is in good condition; has approx. (18,000) hours, and includes a spare parts Logger Baler!

ALJON 580CL Car Logger BalersWith a 10' x 19' chamber and L-box design, it can swallow vehicles as large as full-size vans with ease.Specifications: -- Open Chamber: 19-1/4' x 10.1' x 3.6' -- Bale size: 40" x 25" x Variable -- Production: (20 - 25) Per hour -- Scrap metal productions: 17 - 20+ Metric tons/hour -- Power Unit: Diesel EngineFeatures: -- L-Box design -- New in 2005; approx. (10,000) hours

ALJON - 580CL, ...Car Logger Baler10' x 19' Chamber and "L-Box" design, swallows vehicles as large as full-size Vans with ease.Specifications: -- Open Chamber: 19-1/4' x 10.1' x 3.6' -- Bale size: 40" x 25" x Variable -- Production: (20 - 25) Per hour -- Scrap metal productions: (17 - 20+) Metric tons/hour. -- Power unit: Cummins Diesel Engine -- New in 2008 --Rebuilt Cylinder Features: -- "L-Box" design

2 unused 300 HP auto-transformer coils 460 volt open style-no enclosure 2 coil design. Price is $2500 EACH or best offer.

1957 Allis Chalmers Diesel Power Unit. Formerly connected to a 6kw generator. Engine has approximately 1100 hours. Runs excellent. Call 800-459-2148 for more info.

(4) Alvery Live Rolls Approx 4' x 10' Electric.

Alvey-powered roller conveyor S-shape Roll-case system powered or gravity Overall Length 20/23 1/2 feet & width 12 feet 24” overall width Adjustable height Additional roll case available Stored inside We can quote a price including freight

Amadas Industries Swing Hammer Hog Model HMO 13 ODD S/N 37069