Sawmill Equipment For Sale

In Stock. Brand new AKKUSLAR Model CBK 600 multi cut & double end trimmer 6.2" to 19.6" w/ controls mounted on machine. 5 Saw with 4 easy slide and lock movable saws 7.5 HP each motor. Electric Feed Through sharp chains. Includes a set of wear parts. Lead times for US Only for a quick turnaround will be for a limited time only. Price and performance will amaze you with this 50 year manufacture of sawmill machinery. Quality and performance with every cut simple handling and operation easy access for maintenance also available in a 16' trimmer This machine includes a set of 5 saws at no additional charge. Call Kittrell Sawmill Brokers for more information (931) 797-6284

Turn out 80 MBF in cross and switch ties daily. This quad scragg will cut 6” to 13.7" logs 5’ to 20’ , log Turner infeed 4 independent arbor saws. Hydraulic Sharp Chain Feed Through..... outfeed with can't/rail tie feed through and board separation tailing device. Quality , performance in every cut Simple handling, operation and maintenance. This machine is in stock and has a complete set of new saws Special comes with log loading conveyors and lumber drop out conveyor Up to 200 HP total saw power depending upon application includes MCC and PLC. Deluxe operator console with chair. Purchase now machine is in stock Great for making cants and crossties as well as lumber with the 220 Gang (in Stock) or the 160 bull edger behind it. infeed and drop out transfer decks just add $95,000 for all 3 conveyors super deal save $83,000 today total with conveyors see new price 0% down and no processing fee on leasing Call Jackie 931-698-3342. Try before you buy!

Brand new Double Arbor Gang Saw. In stock price will not be available after this machine sells. This one is 8". This machine is a durable heavy duty machine with 50 plus years experience behind it. MCC and operator console included. This is a limited offer as this machine comes with one complete set of saws. comes with a set of spare ware parts. Parts are stocked in the US by Kittrell Sawmill Brokers FOB Columbia, TN Will load on your truck. Call Jackie 931-698-3342. Retail price $225,000 save $26,150 Quality and performance with every cut Simple handling, operation and maintenance. Call Kittrell 931-797-6284 Try before you Buy

2019 Baker 3665D, only 30 hours, comes w/log deck, 3 strand 20' off bearing deck, debarker, bed extension to cut up to 30' log. Like NEW condition. Price Reduced! $98,000 OBO 616-302-8516

LOWEST HOUR BAKER 3667D ANYWHERE – RUNS AND LOOKS LIKE NEW !!!! Always inside and rarely used by a hobbyist !!! $65,000obo including Setworks, Dinasaw Blade Sharpener and Blade Setter. Baker 3667D Sawmill fully hydraulic, Model No.: BBS-0, Serial No. : 05-430, 67-HP (49.59 kw) John Deere 4-cylinder diesel engine (liquid cooled) with glow plugs, Link to 78 page owner’s manual and complete specs: https://www.baker-online.com//FileStream.aspx?FileID=158, Cutting Capacity:,36 in (91 cm) maximum diameter, 28 in (71 cm) through center, Log Length Capacity: 16 ft Band Blades: 17 ft 4 in x 2 in (5.28 m x 50.8 mm) or 17 ft 4 in x 1 ½ in (5.28 m x 38.1 mm) 17 ft 4 in x 1 ¼ in (5.28 m x 31.75 mm) Blade Thickness: 0.042 in (1 mm) Band Wheels: 28 in (71 cm) diameter; all-steel with crown Sawdust Removal: 6” (152mm) outlet; min. 1,300 CFM suction recomended at dust removal chute Also included: 2/ Dinasaw Blade Sharpener Model No.: RBA Serial No.: RBA 0707181 3/Dinasaw Blade Setter Serial No.: JSD2108, REDUCED to $59,995 - Call 828-779-7102

40 HP 3 PHASE ELECTRIC MOTOR LOG DECK HYDRAULIC POWER PACK

Baker Model A Resaws comes with: Return conveyor, Powered Hold Down, Power Hold Over, Infeed/Outfeed Turnarounds, 240V 3Phase

Brewer Cant cut to length cut up line. Haul-up, unscrambler, infeed roll case, single trim saw, outfeed roll case, Enclosed and air conditioned saw cab with joystick controls. All original Brewer Equipment in good condition. Ready to run. 480v. 3 ph.

COMPLETE SAW MILL CARDINAL - SWP complete semi-automatic saw mill consisting of 3-strand log in-feed chain deck; 2-strand chain seperator table; de-barker in-feed chain conveyor, MORBARK rosser head type 60 HP de-barker; c/w out-feed chain conveyor with hydraulic log tipper; 3-strand mill in-feed chain conveyor; CARNIDAL incline separator; CUT-CO 36"twin saw with twin overhead blades; cobination single cant twin slab carrier with manual refuse station; CARNIDAL incline slab de-scrambler; re-saw/grading in-feed roll conveyor; CARDNIAL 689C 42" slab re-saw automatic saw with MUDATA PLC control; 6-strand edger in-feed table; 7-strand re-saw out-feed table; CARDINAL 4-strand finished lumber out-feed table; CARDINAL incline de-scrambler; CANADIAN TRIM double end precision cut to length saw; 6-strand trim saw transfer table; waste/scrap recovery system. HAS THE CAPACITY TO SAW 40,000 BD FT OF 8 FT CEDAR IN 8 HOURS LOCATED IN ARTHURETTE, NB. COMPLETE SAW SHARPENING SYSTEMS INCLUDED. MILL COMES WITH 46 ACRES OF LAND.

#120 • Cleereman Carriage (1st of an entirety) Serial #: 36"“361"“91. Model: 36. # of Axles: 4. # of Headblocks: 4. Auto Lube System: track lube only. Carriage Type: Automated. Center to Center of Track Wheels: 50". Linear Positioning: no. Log/Cant Turners: no. Overall Carriage Length: 16'. Scanner: no. Setworks: yes. Setworks Make: 12V/Air. Wheel Size: 12". Features and Notes: First a lot of an entirety.Cleereman setworks, includes controls in cab, pantograph arm, tong dog. Rigging Fee $500

CM&E Chipping Heads

2023 Comact 16' rotary lug loaders. RH operation for southern yellow pine. Included is lug loaders, hydraulic power units, and electronics. We have 2 of these new machines available. $325000 each 318-413-2692 or [email protected]

14ft Double edge trimmer, Hyd controls Great Condition With New Paint job.

#135 • Cornell 4 Saw Edger (1st of an entirety) Serial #: 720-4"“83 . Model: HE-42. # of Blades: 4. # of Moveable Blades: 3. # of Stationary Blades: 1. Arbor Size: 2.5''. Blade Type: Circle. Cut Capacity: 6" x 42". Drive Type: Line-Shaft. Edger Set Up: Stationary. Infeed Measurement: 46" x 9'8" not included with edger. Lasers: yes. Outfeed Measurement: 6" x 15' and 16" x 15' tailing belts, not included with edger. Features and Notes: Right side has 2 moving equalizing blades, Left side has one stationary and one moving blade, 19'' blades, including 3 lasers, no drive included.No setworks included.Rigging Fee $500

6" x36" capacity, infeed/ outfeed, 1 movable blade, this unit is completely rebuilt and ready for production comes with a 6 month warranty , LIKE NEW CONDITION

Will cut up to 8"X6" board. I use it for flooring and paneling. Has 12V electric dogs and all systems work as they should. Will cut a 24' log. Is mobile but needs lights hooked up. 27HP Kohler Command runs saws and the carriage runs off a 6HP Kohler.

Dixson 2HB Sawmill, hydraulic dogs, 4 inch tapers, 150hp John Deere power unit, 24 hydraulic in feed, 16’ outfeed deck. Very good condition, $25,000 - Call 218-638-2810 or 218-410-0548

5 Units - L400/ LMI Dynavision scanners. $2000 each 574-825-2129 or [email protected] email

High Temperature Dehumidifiers - Specifically Designed for Lumber Drying. The gentle approach to drying lumber, ensures drying quickly & without damage, every time. Typical Drying Capacities: 1,170 BF Softwood. Call for more details and other solutions at 1-855-873-6800

Hutto Machine Single Shaver $15,000 If interested please call Reed Koger at 870-722-4486 or Sandy Webb 501-672-4004