Sawmill Equipment For Sale

Band Mills (Wide) (41) Band Mills (Thin Kerf) (53) Debarkers (79) Edger-Boards (62) Forklifts (45) Gang Saws (53) Hogs and Wood Grinders (243) Log Loaders (1) Portable Sawmills (29) Resaws-Band (167) Scragg Mills (35) Trim Saws (83) Unscramblers (33) Wheel Loaders (90) Wood Chippers - Stationary (145)
Air Compressors (162) Airlocks (25) Banding-Strapping Machines (137) Blowers and Fans (131) Boilers (24) Bolter Saws (1) Carriages (Sawmill) (28) Carriage Drives (Sawmill) (57) Chip Bins (18) Chip Cyclones (22) Chip Screens (43) Chipping Canters (3) Chop Saws (65) Circular Saw Husks (9) Circular Sawmills (79) Conveyors (83) Conveyors Board Dealing (80) Conveyors Deck (Log Lumber) (206) Conveyors General (30) Conveyors-Auger (4) Conveyors-Live Floor (10) Conveyors-Run-Around (4) Conveyors-Vibrating (54) Conveyors Belts (205) Conveyors-Barn Sweep (24) Conveyors-Live Roll (119) Dip Tanks (4) Drum Dryers (20) Dry Kilns (48) Dump Hoppers (8) Dust Collection Systems (267) Edger Tailing Devices (6) Edgers-Gang (45) Edgers-Slab (6) Edgers-Vertical (4) Electrical (157) Fuel Tanks (2) Gang Rip Saws (117) GenSets (29) Hammer Mills (7) Hydraulic Power Packs (96) Knife Grinders (36) Laser Lights (8) Log Home Machinery (14) Log Merchandising Systems (15) Log Turners (Sawmill) (35) Lumber Carts (20) Lumber Sorters (9) Lumber Stackers (26) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (36) Misc (91) Operator Cabs (32) Package Saws (1) Parts and Parts Machines (9) Plywood OSB and Panel Boards (3) Post and Pole Peelers (22) Power Units-Engines (11) Radial Arm Saws (27) Resaws-Circular (2) Scanning Systems (1) Scissor Lifts (54) Screening Systems (10) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (116) Shavings Mills (20) Slab Saws (13) Stake Pointers (1) Step Feeders (3) Straight Line Rips (2) Tie Processings (1) Tilt Hoists (16) Wrap and Packaging (6)

Filtering

Reset All 

thru
 Used     New
Viewing Page 42 of 190
3797 Results Found
Sort By 
Recently Added Items
Precision Husky 58
$34,900
Precision Husky 58
Baker
$40,000
Baker
1997 Cantek UFO-105B
$650
1997 Cantek UFO-105B
2016 Ingersoll-Rand 2475N5
$3,500
2016 Ingersoll-Rand 2475N5
$ 2,738

EXTREMA DC-240.3 TYPHOON Fabric Filtration Dust Collection System. Powerful, portable, and affordable dust collector with roll around casters mounted to a steel platform base.Specifications: -- (2) Oversized Fabric filter top bags, approx. 75 sq. ft.filter area, are placed above plastic collection bags, approx. 18.85 cu. ft. storage capacity. -- 3,950 CFM Output with single-stage blower. -- 5 HP Induction motor. -- Filter bags filter dust particles down to (5) Micron in size. -- Main inlet 10" or dual 4" adapter. Also available in Single Phase.

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

EXTREMA DCF-05 Bag Filter. -- Features a 16" inlet; unit has (5) sections, (5) 1 micron filter bags with (5) plastic collection bags, rings, clamps and legs. -- Modular design enables additional sections to be added or removed. -- Excellent addition to the "DCY Typhoon" Dust Collector!

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

EXTREMA DCY-750.3 TYPHOON Cyclone Dust CollectorCyclone & fabric filtration dust collection system. -- Powerful two-stage dust collection drops out heavier dust particles through a 1/2 HP Rotary Air Lock (included), allowing you to choose the disposal system, before passing finer particals through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags. -- Air volume output rated @ 4,850 CFM with 7.5 HP Induction motor with 12" inlet. -- 14-3/4" Steel blower fan impeller and is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Standard support frame to allow use with a waste hopper under the cyclone.

Bernie Straple
800-374-5009 ext:339
Call

$ 8,999

EXTREMA DCY-1000 TYPHOON Cyclone Dust Collector. Cyclone & fabric filtration Dust Collection System. -- Powerful 2-stage dust collection drops out heavier dust particles through a 1/2 HP Rotary Air Lock with 10 CFM capacity, allowing you to choose the disposal system, before passing finer particles through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags; air volume output rated @ 6,400 CFM. -- Equipped with: 10 HP Induction motor, 16" steel blower fan impeller and is dynamically balanced and 12" inlet. -- Includes: Collection bag snap-in ring for easy addition or removal of plastic bag; filter bags filter dust particles down to (1) Micron in size; low noise operation. -- Supplied with: Heavy Duty support frame to allow usage with a waste hopper under the Cyclone.

Bernie Straple
800-374-5009 ext:339
Call

$ 6,999

EXTREMA DCF-327E Baghouse Dust Collector.Features a 16" inlet; unit has (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) Micron filter. -- Available for outdoor & indoor use; unit is enclosed. -- Excellent addition to the "DCY Typhoon" Dust Collector; ...ask us why!

Bernie Straple
800-374-5009 ext:339
Call

$ 4,398

EXTREMA DC-250.3 TYPHOON Cyclone & Fabric Filtration Dust Collection System. Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter.Specifications: -- (1) Fabric filter bag placed above plastic collection bag. -- 2,975 CFM rated output. -- 5 HP Induction motor. -- 14-1/4" Steel blower fan impeller is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bag filters dust particles down to (1) Micron in size. -- Low noise operation. Includes: Sturdy steel tripod cyclone mounting stand. Drum dollie (drum not included).

Bernie Straple
800-374-5009 ext:339
Call

$ 600

FALK gear reducer: 13:1 ratio; 52 HP. Price $600.00. As-is/where-is. (Inv. # G-10).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 850

FALK gear reducer: 25:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-1).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 850

FALK gear reducer: 40:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-5).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 950

FALK gear reducer: 40:1 ratio; 10 HP. Price $950.00. As-is/where-is. (Inv. # G-6).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 600

FALK gear reducer: 8:1 ratio; 15 HP. Price $600.00. As-is/where-is. (Inv. # G-4)

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 4,500

Fast-Line sawyer/ operator cab, 5' x 10' x 6' tall, nice large size, good condition

Showcase Equipment
260-250-4645
Call

Call for Price

Fas Trac Band Mill with 20 HP Electric Motor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Fastline Super Edger with Hydraulic Power Unit.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 86,250

Fast Line scragg mill, similar to "Big Jake", twin blades 56" dia, electric drive, includes off-bearer belts, price includes controls and machine gone through shop, ready for production

Showcase Equipment
260-250-4645
Call

Call for Price

Fast Line Super Edger with 7 Blades

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Fastline Mdl FLDB Short Log Debarker w/75Hp Motor, Cab & Controls S/N 420982

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Fastline Sharp Chain Scragg Mill w/8' Capacity, 36" Saws, 40Hp Motors, Shop Built Horizontal Bottom Cut Saw, Log Positioning Turners, 30 x 80" Slab Takeaway Belt

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Fastline Super Slab Saw Edger w/25Hp Motor, 14" x 8' Waste Belt Conveyor & Hyd Drive

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Fastline Mdl# FLDB, Short Log Debarker w/75hp Motor, Cab & Controls S/N 420982

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved