Sawmill Equipment For Sale
.gif)
3800 Results Found
Call for Price
Call for Price
Go Fast 5-Head Resaw Unit was cut into two pieces and can be put back together with a weld in the middle. Approx layout is 31' x 8'
Call for Price
Go Fast Resaw 15 HP Motor Put under power to test, never put into production.
$ 16,500
Goring Kerr metal detector, 50"x 45" opening, new electronics - Call Jeff for more info at 574-370-5050
Call for Price
GREENMAX - EPS-AC-100, ...Cold Press DensifierSpecifications: -- EPS Polystyrene Foam Densifier -- Ratio: 50 to 1 -- Volume: 220 Lbs/Hr -- No Conveyor -- Loaded ont your Truck
Call for Price
7' x 36" 3 Strand Board Deck w/ 3 Arm Drop Out Tipple Elec. Drv.
$ 7,000
.jpg?width=300&height=200&mode=pad)
12" G0503 Grizzly Resaw. Hydraulic Fed. 20hp 3 phase. #00875
Call for Price
2004 Grizzly pop up chop saw 24", S/N 24010 Model G0549, 15 HP 3 phase 220V/440V, cuts 8" thick x 21" wide material carbide tip 24" saw w/ machine, flex dust removal piping, Ref #204, Call 931-797-6284
Grizzly G0562ZP Bag Dust Collector 3 HP motor
GRIZZLY G0631 Downdraft Sanding Table28" x 79" Table area with a 1 hp motor using a squirrel cage fan pulling up to 1,437 CFM, to pull the dust away while sanding on Non-maring rubber grommets to suport your work. -- Table surface area 25 1/4" X 76 1/4", table height 31 1/2" -- 1 st stage filter 16" X 25" X 1"; 2nd stage filter 16" X 25" X 2" -- Filter micron: 1/0.3 -- Inlet size 8" Features; -- SHeet metal table construction, -- Easy access filter bay, quiet operation 68 Db, -- Two convenient dust drawers -- Table surface 39-1/2"x 28". -- Filter size 16"x 25"x 2" cleaning down to 0.5 micron. -- Working height of 37".
7.5 HP 220/440 volt 3-phase wired 220 volt 10” dust inlet Total filter serface 261 sq. Ft. 99.9% effective at .2-2.0 microns 3468 cfm @4.3” static pressure
Call for Price
Grizzly G0919 12" 2 Head Resaw
Call for Price
Grizzly 10ph 4 Bag Dust Collector
$ 10,500
Gruber Systems 12’ Vibration Conveyor Tables with 230V 3 Phase Vibrators Seven Available. Six with Vibrators and one without. These powerful 3-phase electric vibrator-equipped Vibe Tables offer heavy-duty performance, quieter operation, and lower compressed air volume requirements compared to pneumatic vibrator equipped tables. Specifications: Frame: Height (to top of wheelway): - 28” (71.12 cm) Width - 24” (61 cm) Length - 120” - 144” (304.8 - 365.76 cm) Wheelway (wheel center to wheel center): Width - 20-1/8” (51.12 cm) Pneumatic Vibrator (@20 psi): PSI required to Start - 25 PSI (1.75 kg/cm²) Vibrations Per Minute (VPM) - 3,200 Force - 255 lb-force (115.6 kg-force) Flow - 9 CFM (0.25 m³/minute) Electric Vibrator (220/440 volt, 3Ø, 60hz. @ 10% setting) Vibrations per Minute - 3,456 VPM Pounds of force - 230 LB Full load current - 1.26 / .69 Amps Starting current - 9.8 / 4.9 Amps
Call for Price
Call for Price
Gruendler 50XD Wood Hog Pkg, s/n 21419, built in 1972, 59" wide x 73" across-the-shaft top infeed opening, bottom discharge, with estimated 2" to 3" square hole screen grates, mounted on steel subbase for direct coupling 350hp 885rpm 575vac motor with Falk coupling. Includes magnetic separation system.
Call for Price
Grutter End Groover with 10HP Motor and control Box
Call for Price
Grutter Dato Blade Windstop Machine with (2) 10HP Motors & 3/4HP Gearbox
Call for Price
Grutter Birdsmouth Rafter Saw
Call for Price
Grutter Tongue Remover with 15HP Motor