Strapping Machines Banding For Sale

HARRIS PIRANHA Full Closed Door Horizontal BalerSpecifications: -- Cylinder: 10" -- Main motor: 20 HP -- Feed opening: 56" x 36"Equipped with: -- Full Pen

HARRIS GRIZZLY 240-T100-11/9 2-Ram Horizontal Baler with Conveyor72" Incline Conveyor on this Baler; only (2) years old!Specifications: -- Cylinder: 9" -- (2) Main motors: 100 HP -- System pressure: 5,000 PSI -- Main ram face pressure: 283 PSI -- Ejector ram face pressure: 202 PSIEquipped with: -- Operator control station with PLC control -- 72" Green Machine steel belt infeed conveyor -- L & P Pinnacle Tier

HARRIS HRB-SR 2-Ram Horizontal BalerBC-011225: -- Main motor: 100 HP -- Cylinder: 12" -- Bale size: 45" x 45" x 56" -- Force: 198 Tons -- Bale ejector bore: 8" -- Bale ejector force: 88 Tons -- Side ram bore: 6" -- Side ram force: 9 Tons

HARRIS - CENTURION EHD, ...Horizontal Baler -- Bale Separation Door -- Hours: 23,269 ( at time of reading) -- Motors: 200 HP (2 x 100 HP) -- Bale Size: 45" x 30" x 63" -- Hopper Opening: 86" x 105" -- Upgraded Pumps to New Oil Gear 2020 -- New Remanufactured Cylinder 2021 -- Accent Wire Tier 340 -- Came out of Production: November 2022 -- Conveyor NOT Included -- Loaded onto your Truck!

Harris Selco Cardboard Bailing Machine Mdl HL-12HD S/N 70628

HARRIS/SELCO - HLO-60AREB: Horizontal Auto-Tie Baler -- Motor: 2 – 100 HP. -- Cylinder: Rebuilt 12″. -- Hopper: 80″ Long. -- Hours of Operation: 14,000. -- Tons Per Hour/OCC: Up to 26 Tons. -- Includes 72″ MAYFRAN Steel Belt Feed Conveyor.

SELCO - HSO-170AR30: Auto-Tie Baler• 20 HP Motor.• 7"; Main Cylinder.• Bale Size: 30"; x 36"; x (variable).• Cycle Time (No Load): 23 Seconds.• Main Ram Face Pressure: 74 PSI• System Pressure: 2,250 PSI.• Total Compression Force: 86,590 Lbs.

HARRIS-SELCO - HLO-608AR40: Open-End Auto-Tie Horizontal Baler -- Motor: 40 HP. -- 8" Cylinder with: 80" Stroke. -- Infeed opening; 45" x 60". -- Bale size: 48" x 40" x Variable. -- Bale weight: Up to 1,800 Lbs (OCC). -- Production capacity: Up to 6 T/Hr. -- Shear blade. -- Platen force 113,100 Lbs. -- Completely refurbished. -- Warranty: (180) Days Parts/Labor Warranty. -- Loaded onto your truck.

HUSTLER - 48", ...Inclined Infeed Cleated ConveyorThis Conveyor is "New, Never Used," and stored outside. Specifications: -- Width: 48 In. -- Horizontal load area: 8 Ft. -- Inclined height: 21-1/2 Ft. -- Total length: 31-2/3 Ft. -- Main motor: 5 HPEquipped with: -- Oiler -- Cleated

INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler

INTERNATIONAL - AT-4843-850-60, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Opening size: 60" x 46" -- Main motor: 50 HPEquipped with: -- Control panel -- Oil Cooler: Air-Over-Oil -- 10' Bale Run-Out Table -- High temp/low oil level shutdown

INTERNATIONAL TITAN-60-EC Full Eject Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8" -- Main motor: 20 HP -- Feed opening: 58"; x 35"; -- Bale Size: 60"; x 48"; x 30"; -- Feed conveyor width: 48" -- Ram face pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Cycle time: 32 Sec (14 Sec short stroke)Equipped with: -- Programmable controller with Ethernet -- Conveyor controls and conveyor hopper

INTERNATIONAL TITAN 6-EC Closed Door Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8"; -- Motor: 20 HP -- Cycle time: 32 Sec Cycle Time -- System pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Ram face pressure: 87 PSI -- Feed opening: 58"; x 35"; -- Bale size: 60"; x 48"; x 30"; Equipped with: -- Feed conveyor: 48" wide -- Programmable controller -- Ethernet connection

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - MT-4843, ...Manual-Tie Horizontal Baler with Infeed ConveyorSpecifications: -- Cylinder: 8". -- Opening size: 60" x 46". -- Main motor: 40 HP.Equipped with: -- Control panel. -- Oil Cooler – Air-Over-Oil. -- 10' Bale Run-Out Table. -- High-Temp/Low Oil Level Shutdown. -- 48" x 43" x 60" Bale Size.

IBC - NA-1296A-48: Horizontal Closed-Door Baler Model -- 50 HP Motor. -- Main Cylinder: 10″. -- Bale Size: 30″ x 45″ x 60″. -- Hopper Size: 57″ L x 45″ W. -- Platen Pressure: 134 PSI. -- System Pressure: 3,000 PSI. -- Total Force: 235,620 Lbs. -- New cylinder installed approximately (6) months ago.

IBC - "IBC 4343 X 8 – 50 - 63": Horizontal Auto-Tie Baler -- Model: AT-4343-8-50-63. -- Type: Auto-Tie Baler. -- Motor: 50 HP. -- Cylinder Bore: 8";. -- Bale Size: 43"; x 43"; x Variable. -- Manufacturing Date: 2009.

INTERNATIONAL BALER - IB-4430-50, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8". -- Ram force: 125,660 Lbs. -- (6) Tension cylinders: 4" Bore. -- Feed opening: 42" x 50". -- Main motor: 40 HP.Equipped with: -- Shear blade with adjustable striker bar. -- Regin hydraulics. -- LED Indicators for bale functions. -- Autostart electronic beam. -- Oil cooler. -- Replaceable T-1 floor.NOTE: Ram needs some repair.

INTERNATIONAL - NA-1295HD, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 44" x 36" -- Main cylinder bore: 8" -- Total force: 113,000 Lbs -- Ram face pressure: 71 PSI -- Feed opening: 42" x 50" -- Cycle time: 30 sec -- Main motor: 30 HPFeatures: -- PLC Control -- Bale table -- Shear bar -- Heavy-duty welded construction -- Heavy-duty hydraulic system -- Easy-to-operate controls