Sawmill Equipment For Sale

MATTEI BLADE 5 LX-TM-SE, 7.5 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (31.8 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bush on the back and now an oversized radial ball bearing on the front to address the side load created by the belts.MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 7.5 HP TEFC motor, 31.8 CFM @ 115 PSIG; full-voltage motor starter, air-cooled After Cooler. -- MAESTRO XB Controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 120-Gallon ASME Air Receiver Tank. -- Refrigerated Air Dryer. -- Pressure Gauge, Safety Valve, Filter, Oil Separator.

MATTEI BLADE 7 LX-TM-SE, 10 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer ( 39 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 10 HP TEFC motor, 39 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

MATTEI BLADE 11 LX-TM-SE, 15 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (65 CFM @ 115 PSIG).RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with "exclusive Meehanite® iron blades", designed to last 100,000 hours.Features: -- MATTEI "BLADE Series" Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 15 HP TEFC motor, 65 CFM @ 115 PSIG; full-voltage motor starter. -- Air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models. -- MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 120-Gallon ASME Air Receiver Tank. -- Refrigerated Air Dryer. -- Pressure Gauge, Safety Valve, Filter and Oil Separator.

MAX-PAK - MP6020-7: Vertical Baler -- Motor: 15 HP. -- Variety of Bale materials: Cardboard; shredded newspaper; aluminum cans; P.E.T. plastics. -- Bale size: 30″ x 48″ x 60″. -- Max. Bale weight: 1,300 Lbs shredded ONP; 1,200 Lbs for OCC.

MAX-PAK - HOE-2850-308AR, ...Horizontal Open-End Auto-Tie BalerSpecifications: -- Bale size: 30″ x 42″ x 72″ (variable) -- Bale weight: Up to 1,400 Lbs -- Cycle time: 15.23 Seconds -- Motor: 30 HP -- Cylinder bore: 8″ -- Rod: 5-1/2″ -- Stroke: 70" -- System pressure: 3,000 PSI -- Platen force: 143,256 Lbs - 120.49 PSIFeatures: -- Automatic Wire Tie System -- Heavy wall tubular steel frame -- AR 400 floor and platen -- Hydraulic regenerative circuit and air/oil cooler -- NEMA 12 Electrical panel and Control System -- Conforms to: OSHA &ANSI Z245.5 Standards

Maxi Mill Quade Scragg with Premium Cab & Controls

MAXIFLOW by AQC V3-6MCH3-36 CARTRIDGE Filter Dust Collector. -- Specifications: 16,000 CFM approx. Filter Cartridge System complete with (36) cylindrical cartridges (130 sq. ft. cloth area per cylindrical cartridge - 13.84"OD x 9.47" ID x 26" long.) for a total 4,680 sq..ft. of filter area; operating at 3.4:1 air-to-cloth ratio. -- Cartridge Specs: SB-820, 100% Polyester Spun-bolded, 8.0 oz/sq. yds. Air permeability 20 -30 cfm/sq. ft. @ 0.5" WG. 200°F continuous operating temperature. -- Comes with: Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges; Sequencing Timer in an enclosure. -- Construction: 11 gage fully welded construction. 1/4" thick plate Tube Sheet. (3) V-shape 66" hoppers under filter housing. Heavy Duty steel legs to position unit approximately 43"' above the ground, providing sufficient clearance for (3) 55 Gal. drums.. Housing rated for +/- 20 " WG. Includes 92) 20" dia. top inlet pipe. -- Equipped with: TWIN CITY Fan, approx. 26" inlet belt driven by a 40 HP , 1800 RPM, TEFC Fan generates 16,000 CFM at 9" WG. Ground-mounted fan/motor. -- Features: ABB 'HVAC' series VFD (Variable Frequency Drive) for variable speed of motor to conveniently control desired CFM.. AfterFilter section with HEPA filters for return air into building with (4) grille sections. -- Services Required: 110V 50-60 Hz; air supply of 12 CFM @ 90 - 100 PSI. Pulses every 10 sec. -- Overall filter dimensions/Weight: 86" wide x 132" long x 160" ht. (156.5" + inlet flange); 6,500 Lbs. -- Seismic rating zone 4, Wind resistance 160 KPH (100 MPH).

MAXIFLOW by AQC 9MCH4-72 CARTRIDGE Filter Dust Collector. -- Specifications: 35,000 1CFM range approx (depending on application and ACR required). Filter Cartridge System complete with (72) cylindrical cartridges (130 sq. ft. cloth area per cylindrical cartridge - 13.84"OD x 9.47" ID x 26" long.) for a total 9,360 sq..ft. of filter area. -- Cartridge Specs: SB-820, 100% Polyester Spun-bolded, 8.0 oz/sq. yds. Air permeability 20 -30 CFM/sq. ft. @ 0.5" WG. 200°F continuous operating temperature. -- Comes with: Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges; Sequencing Timer in an enclosure. -- Construction: 11 gage fully welded construction. 1/4" thick plate Tube Sheet. (3) V-shape 66" hoppers under filter housing. Heavy Duty steel legs to position unit approximately 43"' above the ground, providing sufficient clearance for (5) 55 Gal. drums.. Housing rated for +/- 20 " WG. Includes 92) 20" dia. top inlet pipe. -- Equipped with: BAE-SW Size 402TWIN CITY Class 4 Air-Foil Fan belt driven by a 150 HP , 1783 RPM, TEFC Fan generates approx 35,000 CFM . Ground-mounted fan/motor. -- Includes: Control Panel. Sprinkler System. Catwalk/Ladder. Barrels & Ducting. -- Services Required: 110V 50-60 Hz; air supply of approx. 22 CFM @ 90 - 100 PSI. Pulses every 10 sec. -- Overall filter approx. dimensions/Weight: 186 W x 111" Deep x 160" H. 9,500 Lbs. -- Seismic rating zone 4, Wind resistance 160 KPH (100 MPH)

McCormick Inline Metal Detector with Controls

McDonough 54" center split resaw, older, cast-iron version with 50 HP, 220 Volt, 3 phase motor. Resaw uses 6" blades. Wheels have 6 3/8" face. Price $6,800 O.B.O. Call Brian 336-269-1238 for more details and pricing.

McDonough 6' Band Head Rig with Weight Strain, Line Bar,4x4 Cab 24" x 18' Infeed Rollcase, cant positioner, Controls & 36" 22' Outfeed Rollcase

McDonough BDM-601 Guide Block Dresser

McDonough 62" Linebar Resaw S/N 62M: 1.25" thick bottom wheel, .75" thick top wheel, mechanical weight strain, swing door to change saw, 150 HP electric motor and v-belt drive (no belts); Linebar with 3 chromed press rolls, hydraulically driven, Temposonic setworks with cylinder, 5 bed rolls; hydraulic power unit for feed rolls and speed control; Infeed with slab lifters, bed rolls, and air operated cant turners; 14' landing table with rooftop chain; 12' runaround landing table with rooftop chain; 7' outfeed runaround with tipples. Located in VA. Removed from service and ready to load on your truck. $49,000 OBO.

MCDONOUGH Bandmill 62″ Bottom Wheel.

54" Horizontal Resaw Wide Blade Excellent Machine 400K Replacement Cost

McDonough Guide Dresser

McDonough Hydraulic Unit

McDonough guide block dresser s/n RDM-980

McDonough 54" Center Split Head Rig

2001 McDonough Precision Duty 42" Carriage. 3 Knees. Pantograph, UHMW Cant Kickers, Brownsville Turners on each Knee. Needs to be rebuilt and will come with a 1 year warranty (same as new).