Air Compressors For Sale

Quincy 75HP Screw Compressor Serial# 940351

Quincy Air Compressor

Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 100 hp electric power, 69,848 hrs, good working condition

QUINCY - QMT15 ACA, ...Air Compressor (Rotary Screw) w/DryerSpecifications: -- 15 HP - 54.9 CFM @ 125 PSIG; 120-Gallon tank mounted with Refrigerated Dryer & Filters. Equipped with: -- 15 HP TEFC Motor; air-cooled aftercooler; high efficiency inlet filter; upward package air discharge; vibration isolation; Wye-Delta start. -- 54.9 CFM @ 125 PSIG; 69 dBA; 120-gal horizontal tank; refrigerated air dryer.Total operating hours: (29,407).Specifications subject to verification

SAMUEL TANK-660V-150PSI 660 Gallon Air Receiver660 Gallon Vertical Air Receiver Tank. • Diameter O.D./I.D.: 42 O.D. • MAWP: 150 PSI @ 400° F • MDMT: -20°F @ 150 PSI • Capacity: 660 Gallons • Pressure: 150Support & Attachments: • 8 Base Ring • Safety Valve & Pressure Gauge - 700/MCTK-SW10-150Recommended Option: Zero Loss Compressed Air Condensate Trap w/WindowPowers through Condensate buildup and Ideal for Compressor applications up to 100 HP (500 SCFM).Ideal for inline filters up to 5000 SCFM. • The WaterHog™ design avoids small passages common on competitor designs, ensuring clog-free operation. • Fully Automatic Operations. No timer or manual settings • No Electrical Connections. WaterHog™ is powered by compressed air, avoiding the need for electrical wiring and connections. • Energy Saving Operation. Zero compressed air loss when properly installed with balance line. • Check with your utility to see if it qualifies for energy efficiency incentives. • WaterHog™ pays for itself when replacing open condensate drain valves or timer traps. • Low Profile. • The 4.7" vertical operating height allows WaterHog™ to fit where other larger units can't. • Max Operating Pressure: 200 psig • Min/Max Control Pressure: 40/130 psig • Min/Max Temperature: 34/170 F • Inlet / Outlet Connections: 1/2 inchPrice ...$ 450.00 (2) Year Warranty Included

SPEEDAIRE - 4B228D, ...Portable CompressorSpecifications: -- 6 HP Reciprocating Air Compressor; Pump # 4B247A; 10.3 SCFM @ 90 PSI; 9.1 SCFM @ 135 PSI. -- Max. pressure rating: 135 PSI; 26-Gallon horizontal air receiver on (2) wheels; motor and flywheel guard.6 HP Motor, wired for single-phase, 240 Volts, 15 Amp. -- Complete with: -- Single-stage Compressor head; air pressure regulator gauge, and tank pressure gauge; start-stop auto or manual cycle controls; pressure relief valve. -- (1) Air discharge port with quick disconnect.

120 Gal. Vertical Air Receiver Tank. -- ASME / NB code for 200 PSIG max. working pressure. -- Equipped with 1/2" safety relief valve (#141478), pressure gauge (#P-500) and manual drain with fittings for installation (shipped loose). -- Primed exterior; approx. weight 260 Lbs.

STEEL FAB 300 Gallon Vertical Air Receiving TankSpecifications: -- Tank size 30" Dia. x 5-1/2' H.

STEEL FAB 400 Gallon Vertical Air Receiving TankSpecifications: -- Tank size 36" Dia. x 6' H.

SULLAIR ES8-30H/A 30 HP Single-Stage Fluid Rotary Screw Air Compressor, with 53,186 Run & 49,602 Load Hrs. (As of 11/2023)Specifications: -- Cap. 111 ACFM. -- Rated pressure 60 - 125/135 PSIG. -- Noise level 85 dBA.Equipped with: -- E-Profile rotor design air end. -- 30 HP 3,530 RPM Motor. -- Air-cooled aftercooler. -- SULLAIR “SUPERVISOR II DELUXE"; Microprocessor controller & graphic monitor system, with LCD Display, Touchpad, Constant pressure & temperature readout of pressure, Power failure auto restart, & Automatic start/stop.

75HP Sullair Screw Compressor

MLS Number 12355436 Sullair 1109E/A Air Compressor 123/135 PSIG Air Pressure Rated Max.

SULLAIR - LS12-60- HH/A/SUL, ...Rotary Screw Air CompressorSpecifications & features: -- 60 HP - 1,770 RPM Motor, rotary screw air end, 150 max. PSI, 250 ACFM; (2) asymmetrical lobe profile rotors, only make contact on a lubricated pitch line to virtually eliminate capacity or efficiency loss. Features: -- Tapered roller bearings on the discharge and cylindrical bearings on the inlet for high load carrying capacity, pressurized fluid lubrication & cooling of the compressor with rigid piping and tubing; efficient 2-stage air/oil separation with replaceable element. Complete with: -- Spin on fiberglass fluid filter; Heavy Duty inlet air filter. -- Capacity modulator stabilizes system pressure and matches output to demand (minimizes need for Air Receiver & reduces wear caused by start/stop). -- Electromechanical gauges & controls, air aftercooling; mounted on a steel frame bed with fork cutouts. -- (73,500) Total operating hours.

SULLAIR 10B-50 ACAC Rotary Screw Compressor (Open Type)Specifications: -- 50 HP - 1,770 RPM Motor, rotary screw air end, 100-110 max. PSI, approx. 180 ACFM; (2) asymmetrical lobe profile rotors only make contact on a lubricated pitchline to virtually eliminate cap. or efficiency loss. -- Equipped with: -- Tapered roller bearings on discharge and cylindrical bearings on inlet for high load carrying capacity. -- Pressurized fluid lubrication & cooling of Compressor with rigid piping & tubing; efficient 2-stage air/oil separation with replaceable element. -- Spin-on fiberglass fluid filter, Heavy Duty inlet air filter, cap. modulator stabilizes system pressure and matches output to demand (minimizes need for air receiver & reduces wear caused by start/stop). -- Includes: -- Electro-mechanical gauges & controls, air after-cooling.

SULLAIR S-ENERGY 2209D AC 30 HP Rotary Screw Air Compressor, with 39,568 Run Hrs. (As of 7/25/24) & Built-In Dryer?Specifications: -- Cap. 127 CFM. -- Operating pressure 125 - 135 PSI. -- Max. operating temperature 235° F.Equipped with: -- 30 HP 1,770 RPM Motor. -- Ethernet connection for remote monttoring. -- Sound enclosure. -- "WS" Digital controller, with LCD Display & Touchpad. Complete with: -- Built-In Refrigerated Dryer.

Sullair LS-100 100HP Screw Compressor

Sullair air dryer, 500CFM, 3 phase, 460 volts, refrigerant type, excellent condition

Sullair SRV-1400 Screw Air Compressor 50HP

MLS Number 10170463 Sullivan-Palatek 5OUD Air Compressor 50 HP New shaft seal

10 HP 575 volt unit. Has between 25-27 CFM. RPM: 1745