Sawmill Equipment For Sale

58" Large Mouth Soderhamn Chipper 6K w/ Andritz Turnknife disposable knife system. Includes motor, common base, & guards. This unit is ready to ship & go to work.

84" Soderhamn Veneer Feed Box Assembly

Soderham Chip Pack 48"

Soderhamn 48" 4 Knife Wood Chipper w/ 100hp Motor s/n: 735

Soderhamn S/N 030031 150HP Electric Motor

48" SODERHAMN/PRECISION chipper. HFVD; 6 knife; standard 14 3/4" knife length; pockets in good condition; 12" round discharge; 3 fan blades; 11" round wood capacity x 26" diagonal length.

Soderhamn 48" 3 Knife Stationary chipper S/N 616

30" dia Cambio ring debarker, 6 arms, steel infeed press wheels, all electric, all electrical and controls included, recently in production and in good working condition, infeed/ outfeed also available, call for price

2009 Soderhamn Ericksson Cambio 71-45 AIR-TEN, CAMBIO 71-45 AIR-TEN DEBARKER, SECOND HAND, Debarker for logs. For clean and gentle debarking. - Technical data Rotor opening: 450 mm - Min. log diameter: 65 mm - Min. log length: 2.5 m - Rotor speed and feed speed: 410 rpm, 75 m/min - Feedwork motor: 7.8/5.7 kW at 1460/985 rpm - Rotor motor: 37 kW at 1470 rpm - Weight net: 3,150 kg - Dynamic load: 48,000N. Call 800-459-2148 for more info.

4000# capacity 96” x 64” table size raised height 38-1/2" Lowered height 14-1/2" pneunatic operation Rotatable table 360 degrees safety skirts

PalletPal Spring Lift Table Specifications Load capacity 400 to 4500 lbs., depending on springs Load size .......50" wide x 50" long x 72" high (max.) Length 45 1/4 inches Width (base frame) 36 3/4 inches Compressed height 9 1/2 inches Extended height 27 3/4 inches Rotating ring, outside diameter 43 5/8 inches Rotating ring, inside diameter 40 5/8 inches Adjustment for sloping floors Can adjust for floor slope up to 1:25 using optional adjustable feet 4 Available

Southworth 8'x 3' Electric Scissor Lifts

SPEC AIR Model R120-26RD-OC Baghouse Filter Auto Shaker Type Dust Collector Loaded with features. -- Capacity of approx.15,500 CFM and the following features and components: -- EB-26, 60 HP SPEC AIR, Air Handling Fan , 15.500 CFM @ 16" SP mounted in a negative pressure configuration (clean air side) with return air and with automatic 26" dia.Abort Gate Damper according to NFPA-68-69 CODE. 110 volt actuated by the Spark Detection System. -- HANSENTEK AN104 Spark Detection/Suppressions system Per NFPA 64-68 and c/w BPS-9X4 Booster Pump & FLEXCON P2P20 Tank. -- 1,961 sq. ft. of filter area using (97) high efficiency Polyester bags. Operating at 7.9 to 1 ACR (Air to cloth ratio). -- 26"; Diameter Inlet & outlet duct. -- Tangential inlet with Backflow Damper, according to NFPA-68 CODE. -- Top mounted motorized bag shaker. mechanism powered by 1.5 HP. -- Rotary Air Lock with 96" clearance. (4) leg support steel frame & Safety access ladder. -- Explosion Venting Doors, according to NFPA-68 CODE. -- Filter Bag size approx. 9" dia. x 9' long, -- Inline 26" dia. Silencer muffler on return air duct. -- Ground mounted Belt Driven Fan complete with TEFC motor and inspection door. -- Features: 60 HP Soft Start Controller. -- ENGINEERED ELECTRIC Control Panel with starters and controls. -- Manometer gauge to monitor differential pressure (life) of filter media. -- Housing/Support Steel dimensions: 120" long x 120" wide x 32' high. Approx. 13, 500 Lbs. -- Some pictured pipe is included.

20’ speed cut system. Was pulled out of production September 26th.

SPEEDAIRE - 4B228D, ...Portable CompressorSpecifications: -- 6 HP Reciprocating Air Compressor; Pump # 4B247A; 10.3 SCFM @ 90 PSI; 9.1 SCFM @ 135 PSI. -- Max. pressure rating: 135 PSI; 26-Gallon horizontal air receiver on (2) wheels; motor and flywheel guard.6 HP Motor, wired for single-phase, 240 Volts, 15 Amp. -- Complete with: -- Single-stage Compressor head; air pressure regulator gauge, and tank pressure gauge; start-stop auto or manual cycle controls; pressure relief valve. -- (1) Air discharge port with quick disconnect.

Sprecher & Schuh starter

Sprout-Bauer Hammer Mill Model 38-12 H.M. - S/N 90-0269 W/100HP Electric Motor

Sprout-Bauer Hammer Mill 38-12.4 H-Mill S/N 88-1530 W/ 100HP Electric Motor.

Sprout- Waldron shaker screener, was running when pulled out of production.

Sprout Waldron Mdl 2548 Hog with 200HP Motor