Sawmill Equipment For Sale
3817 Results Found
Call for Price
$ 6,850
DIEHL - DMG -12, ...Profile GrinderSpecifications: -- 1/2" Width cap. and 10-1/2" max. cutting circle. -- 1 HP TEFC Motor with 2,260 RPM grinding spindle. -- (2) 1-13/16" Dia.; 16" X-axis & 6" Y-axis table movement. -- 30° Clockwise & 90° counterclockwise base swivel rotation for face grinding of profile cutters or planer knives. -- +30° to -30° Vertical grinding spindle adjustment. -- 2" In & out adjustment. -- 1" X-Axis & 1-7/8" Y-axis template adjustment. -- 7" Min. & 10" max. grinding wheel dia.Equipped with & Features: --Coolant pump with 5-gallon tank.
Call for Price
The seller has upgraded to a new machine and no longer needs this rip saw. This machine still runs a few times a week at the shop. 15 HP Motor 2 HP Feed Motor 2" Arbor 16" Max blade capacity Chain drive
Call for Price
Diehl model MR-90 Gang Rip Saw Twelve ( 12 ) inch saw arbor width capacity- Roll feed 50 HP 3600 RPM arbor motor -direct coupled wired 480 volts, 3 phase- new motor bearings 2 HP variable speed feed motor 50 to 150 FPM feed speed-variable Four powered top feed rolls- Excellant feed roll gears 12 inch arbor with one (1) sleeve with spacers Adjustable rip fence Serial number : 66M-1668 Cleaned , checked , and painted
DISA NFP 3H OPEN 9,000 CFM 20 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 894 sq. ft.Equipped with: -- DISA "S056-450-CW" 20 HP - 1,755 RPM 208-203/460 V Dual voltage TEFC blower, with Inlet dia. 450 mm (17.72") & Outlet size 16" x 18". -- (48) Approx. 8" Dia. x 8' L "BEANE" media filter bags. -- Trough-style hopper base, with (6) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ALLEN-BRADLEY Switch box, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.
Call for Price
DIXIE AIR SPB Pulse Jet Dust Collector. -- 16,100 CFM @ 9.5:1 air-to-cloth ratio, round baghouse with (108) cloth filter bags of 12' length resulting in a total approx. 1,695 sq ft of filter media area. -- Ground mounted main Blower with 50 HP motor connected in a negative pressure configuration. -- Automatic reverse pulse cleaning system with differential pressure gauge, positive displacement air pump for pulse clean. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed. -- Walk-In Clean Air Service Plenum. Tangential dirty air inlet. -- Electrical control panel. -- Single cone hopper outlet with 10" Rotary Airlock discharge. -- Horizontal shared transfer auger (about 54' long). -- Steel support structure with access ladder and service platform.Professional disassembly, loading on truck and/or transportation available upon request.NOTE: Unit being sold under this record is pictured on the right side on the first two photos. For the larger diameter unit on the left side (PNEUMAFIL) see record "DO-011265".
Call for Price
The seller has confirmed that this Dixie Air dust collection system is in great working/running condition and it is ready to load! - Size: 108-12 - Type: SPB - 50HP - Inlet to the motor - Circumference: 90"
Call for Price
This system was running daily before hte facility shut down 4-years ago. Buyer will need to provide rigging. (240) 4" x 12' Bags 100 HP Main Motor Bags are cleaned by compressed air approx every minute System is approx 1998 Approx 35000-38000 CFM
$ 2,255
Used DODGE TDT26 shaft mounted gear reducer; 25.66:1 ratio, input shaft diameter 2 3/8", bore 5", S/N 1645. Offered as-is where-is. (INV.G-18) Price $2,255.00.
Call for Price
Reliance / Dodge gear reducer, 100 RPM output, 5HP Reliance motor: 230/460V, RPM 1700, SF:1.00, INS. CL:F, Reliance ID# B77Y9718P, Hz:60, Dodge# size:5-147P-DG4A-2-17.1-A1, Four are available, Video of them running available. several other types and sizes available
Call for Price
Donaldson Torit 2DF8 cartridge dust collector Pulse-jet cleaning Torit Downflo 2 DF 8 Pulse-jet cartridge dust collector Nominal airflow range CFM 1,020 to 6,300 Filter area: 1,520 sq.ft. Voltage 208-460 12”Fan Inlet, 5HP , 3450RPM , 2,200 CFM @10” SP. Large fans available Several different fan types, sizes and HP available Demonstration video of fan running upon request Dismantled & stored in warehouse for prompt delivery Prior use on wood dust inside of a building Several other larger and smaller dust collectors in our warehouse Contact us for pricing including freight upon request
Call for Price
DONALDSON / TORIT DWST6-5 Cartridge Dust CollectorDownflo® WorkStations (DWST) fit anywhere on the plant floor and apply NO restrictions to worker movements or visibility. The full line of WorkStations are designed specifically for those in-plant areas where dirty and/or noisy operations are out in the open—grinding, sanding, chipping, batch mixing or welding. The DWST delivers exceptional performance in metalworking, woodworking, and process applications where high filtration efficiency and ledge less construction is often a requirement. Specifications: -- (5) Module System, each with 10 HP motor, 7,000 CFM. -- (4) Ultra-Web cartridges. -- Pulse-cleaning manifolds and ventures, (2) dust drawers. -- (1) Acoustical panel per module. Louvers mounted on lower section of unit.Includes: -- (1) IEC control panel includes 460-volt motor starters, circuit protection for each motor, transformer, programmable logic controller. -- Magnehelic gauge mounted in a panel door, start/stop buttons, and a through-the-door disconnect switch. -- Pulse cleaning can be continuous or after-shift. -- All components are IEC rated. The enclosure is rated Type 12. -- 1"; Compressed Air Regulator with Filter Separator and Gauge, Black Iron Fittings, and Black Iron Piping Required for Cleaning System. -- Provides a 1"; Common Connection Point for Design Shutters to Tie into with Existing Compressed Air System.
DONALDSON / TORIT - 2DF-16, ...Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes "New" AirMax Premium Media Cartridge Filters: Fire retardant. -- Total filter media area: 3,616 ft². -- Air-to-Media ratio @ 8,000 CFM: 2.2:1. -- Automatic Pulse Clean System with: Differential pressure gauge and sequencing control in enclosure. -- (2) Hopper outlets with sealing drum cover kits. -- Steel support structure. -- Includes: 20 HP Top mount, direct-drive Blower. -- Rated for 8,000 CFM. -- Electrical motor starter & controls. -- Includes: Installation/Operation/Maintenance Manuals.Sold with 6-Month Mechanical Warranty
DONALDSON / TORIT - DFT2-16, ...Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes: "New" AirMax premium media cartridge filters: Fire retardant. -- Total filter media area: 4,064 ft². -- Air-to-Media eatio @ 8,000 CFM: 2:1. -- Automatic Pulse Clean System with differential pressure gauge and sequencing control. -- (2) Hopper outlets with: Sealing drum cover kits. -- Steel support structure. -- Includes: 20 HP Top mount, direct drive blower. -- Motor starter & controls Sold with 6-Month Mechanical Warranty
Donaldson Torit DCE- Environmental Control Booth & Dust Collector Torit ECB-4 Modules, complete with control panel Built dust booth and own lighting. Environmental Control Booth Powerful, Self-Contained Dust Collection The Donaldson Torit® DCE Environmental Control Booth, ECB Work Station, is ideal for finishing works on large and irregularly shaped parts. This self-contained working environment is specially designed to remove fine airborne dust from multiple sources without interfering with workers’ movement or visibility to ensure efficient dust control. The unique booth design is complete with lighting, sound- proofing and built-in dust collection. It requires no ductwork, and re-circulates the cleaned air for reduced energy costs. Workers inside the booth enjoy complete freedom of movement, cleaner air and excellent visibility. The powerful filtration capabilities of ECB Work Station prevent migration of dust to other parts of the plant, protecting workers outside the booth from the dust and noise generated inside the booth. Stand-alone unit for easy moving at the plant High filtration efficiency with Ultra-Web® cartridge filters Freedom of movement and improved visibility Flexibility to increase capacity Requires no ductwork Safely recirculates cleaned air for reduced energy costs
Call for Price
Donaldson Torit 2DF8 cartridge dust collector Pulse jet cleaning Torit Downflo 2 DF 8 Pulse jet cartridge dust collector Nominal airflow range CFM 1,020 to 6,300 Filter area: 1,520 sq.ft. Voltage: 208-460 DOES NOT HAVE THE SUPPORT LEGS Several different fan types, sizes and HP available Demonstration video of fan running upon request Dismantled & stored in warehouse for prompt delivery Prior use on wood dust inside of a building Several other larger and smaller dust collectors in our warehouse Contact us for pricing including freight upon request