Sawmill Equipment For Sale
3815 Results Found
$ 19,900
Complete EDMISTON mill. Mill ran in March 2024. Includes: 3 strand log deck with top/loader; chain log turner; 4 headblock mill with track / frame / cab and control panel; chipper slab belt; dead rolls; 48" Precision chipper, blow pipe, and electrical (needs work before running); All electrical panels; spare saw blades. MUST BE REMOVED BY END OF AUGUST. Price includes all components $19,900.00
$ 7,900
EDMISTON board edger. Includes: infeed;50 HP electric drive; starter; NO OUTFEED. Price $7,900.
Complete Edmiston Sawmill Set Up, Including: Frick Edger, Log Decks w/ Stop & Load, (2) Deutz Power Units and MORE, $20,000
Call for Price
Call for Price
Edmiston 2 Saw Edger HYD set w/Split Saw & Tailing Belt, includes 40 HP electric motor & substructure
$ 7,500
Edmiston Type #2 vertical edger w/ (2) moveable saws w/ 50 HP motor (ref #154) Call Logan 304-641-6640 Call for pictures
$ 40,000
Edmiston (4) head block carriage Model 36 w/ track & bumpers w/ Tyrone Berry SMA 225 hydraulic carriage drive & power unit, includes (2) saw hydraulic set vertical edger w/ saws, Silvatech setworks & saw cab - No husk frame... great to run with a band mill or we can find you a husk frame. (Price is loaded on buyer’s truck) (Ref #151) Call Amy Cross for more information. 928-723-9449
$ 11,500
$ 89,500
Edmiston 48” (4) HB circular sawmill, tong dog, includes chain type log turner, 30 HP hydraulics for carriage & turner, mill cuts up to 24’, includes husk frame w/ top saw, 15’ slab dump conveyor, Tyrone 150 HP shot gun carriage drive (only 4 years old!) w/ Z-Set setworks or can use standard Edmiston setworks, Note: Seller's new mill will need to be onsite before taking this out. Seller will remove. (ref #181) Call Amy for more information (928) 723-9449
The mill is a 56” Edmisten’s that was capable of cutting longer lengths. Up to 34’. The carriage is 20’ long with 5 headblocks.
Call for Price
Call for Price
Call for Price
ELETTROMECCANICA 365710 AUTOTRANSFORMERAuto Transformer Specifications: -- 35 KVA; 220 - 230 V; 60 Hz Primary Transformer to 380 Y+N; 50 Hz secondary.
Call for Price
ELGI EG30-125 Rotary Screw Air Compressor; 40 HP - 170 CFM @ 125 PSIG40 HP Rotary Screw Compressor (Direct Drive); Air-End equipped with "eta-V" profile rotors. Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: -- Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: -- Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: -- Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty
Call for Price
ELGI EG37-125 Rotary Screw Air Compressor; 50 HP - 212 CFM @ 125 PSIGELGi’s Encap series screw compressors are designed to encapsulate all functional components and compressor within a common housing. With its small footprint, high reliability and low maintenance requirements, the compressors are ideal for all industrial applications where size, efficiency and cost matter.Specifications: • Horsepower: 50 • Starter: Wye Delta • CFM: 207 • PSIG: 125Standard Features: • 6 Year Airend Warranty • Low Sound Enclosure • Premium Efficiency NEMA motor w/F insulation • TEFC Drive and Fan Motor • High Ambient Oil Cooler for low operating temperature • UL/cUL Certified Control Panel with Wye-Delta Reduced Voltage Starter • Controls & Indications: Microprocessor Controller includes • Maintenance Schedules • Pressure Transmitter • Temperature Transmitter • Auto Restart • Remote Start / Stop • Modulation and Load / Unload Controls • Phase Monitor • DCS Connection through Rtu/RS 485 PortExtended Warranty (Parts and labor):Extended Warranty coverage requires commissioning report submitted within 30 days of the compressor start-up, the use of ELGi replacement parts, adherence to ELGi’s maintenance schedule, testing, and conditions as outlined below. Failure to follow these terms will void the Extended Warranty.Air End:72 months from date of start-up or 78 months from date of shipment from an ELGi warehouse, whichever occurs first.
Call for Price
ELGI EN04-125 5 HP ENCAP Series Rotary Screw Compressor; 19.3 CFM @ 125 PSIG Equipped with: -- Efficient air filtration system where air enters through a pre-filtered enclosure. -- After cooler is standard on all models to enable high efficiency TEFC, Super E, 5 HP motor operation up to 115°F ambient temperature.Complete with: -- "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Includes service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely.Includes: -- 3-Stage efficient air-oil separation (less than 2 PPM). -- Single door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety. -- (230 volt, 1-phase option available).
Call for Price
ELGI EN05-125 7.5 HP ENCAP Rotary Screw Compressor w/Tank & Dryer; 26.5 CFM @ 125 PSIG.ELGI's 7.5 HP Rotary Screw Air Compressor wRefrigerated Dryer mounted on a 60 gal. receiver tank.Equipped with: -- 7.5 HP motor operation up to 115°F ambient temperature; "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Includes service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start, and the ability to hook up to a RS 485 connection to monitor the system remotely.Includes: -- 60 Gal. receiver tank, 25 CFM Refrigerated Air Dryer; single-door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety. -- (230 Volt, 1-Phase option available).Compressor weight approx 860 LbsCompressor dimensions approx 54" x 45" x 58"
Call for Price
ELGI EN07-125 10 HP ENCAP Rotary Screw Compressor w/Tank & Dryer; 38 CFM @ 125 PSIG.ELGI's 10 HP Rotary Screw Air Compressor w/20 CFM Refrigerated Dryer mounted on a 120 gal. receiver tank. -- Equipped with: 10 HP motor operation up to 115°F ambient temperature; "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely. -- Includes: 120 Gal. receiver tank, 40 CFM Refrigerated Air Dryer; single-door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety.