Sawmill Equipment For Sale
.gif)
3602 Results Found
.jpg?width=220&height=170&mode=crop)
$ 40,000
1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense
Call for Price
Baker 2-Head Resaw 20 HP Motors Return Conveyor
Call for Price
$ 17,500
.jpg?width=300&height=200&mode=pad)
Baker 12" resaw w/ cross over chains and return. Machine has four sets, all manual, line shaft ready. Located in PA. #C916
$ 12,500
Baker/Augusta Mills Cant sizer Recent rebuild by Baker 3.5"-5.5" cants New bearings New belts 6" belt Lineshaft setup Speed up wheel Work ready PRICE REDUCED
$ 10,500
.jpg?width=300&height=200&mode=pad)
Baker C Resaw with Return. Located in NY. #C929
$ 75,000
SHOWCASE REBUILT! Baker 5 head resaw, electric drive, includes return belt and 1 turn table, PRICE INCLUDES A COMPLETE REBUILD AND A FULL WARRANTY!
Call for Price
Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide
$ 12,500
Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital display, electric drive, includes spare parts/ blades, excellent condition
$ 60,000
2016 Baker 3665D Bandsaw Mill Two owner 65HP diesel Loaded 3500 hours New tracks, chains, wheels, sprockets, many hoses and bearings, lots of welding and straightening, new blade guides Spare wheels and parts included
$ 7,500
Call for Price
Brand new...never used...still on the original pallet.
Call for Price
Baker Side Transfer Belt - Hydraulic drive, 5 1/2" x 40" side shift belt, 24" x 5', 21" belt.
$ 7,500
.jpg?width=300&height=200&mode=pad)
Baker A single Head Bandsaw with 18hp Kohler motor #00899
Call for Price
Baker Band Resaw Return conveyer 480 volt 3 phase 6" x 12" capacity
Call for Price
Single head Baker resaw | 3 Phase 480V | 30HP | Capacity is roughly 6" wide x 6" tall
$ 2,500
2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition
Call for Price
Baker Furnace Inc Dry Kiln 3 phase 110V
Call for Price
Dry Kilns (cream), Conventional Heating System, 600,000 BTU Propane, single phase, 120V control voltage, 3 phase 208V motor voltage, open volume: 672 cubic feet, max operating temperature: 500F, owners manual included, excellent condition, 2 units available