Sawmill Equipment For Sale

Sturtevant 20" inlet, 16"x14" Outlet. 36" Fan w/30HP Motor

Sullair SRV-1400 Screw Air Compressor 50HP

75HP Sullair Screw Compressor

MLS Number 12355436 Sullair 1109E/A Air Compressor 123/135 PSIG Air Pressure Rated Max.

SULLAIR - LS12-60- HH/A/SUL, ...Rotary Screw Air CompressorSpecifications & features: -- 60 HP - 1,770 RPM Motor, rotary screw air end, 150 max. PSI, 250 ACFM; (2) asymmetrical lobe profile rotors, only make contact on a lubricated pitch line to virtually eliminate capacity or efficiency loss. Features: -- Tapered roller bearings on the discharge and cylindrical bearings on the inlet for high load carrying capacity, pressurized fluid lubrication & cooling of the compressor with rigid piping and tubing; efficient 2-stage air/oil separation with replaceable element. Complete with: -- Spin on fiberglass fluid filter; Heavy Duty inlet air filter. -- Capacity modulator stabilizes system pressure and matches output to demand (minimizes need for Air Receiver & reduces wear caused by start/stop). -- Electromechanical gauges & controls, air aftercooling; mounted on a steel frame bed with fork cutouts. -- (73,500) Total operating hours.

Sullair LS-100 100HP Screw Compressor

Sullair air dryer, 500CFM, 3 phase, 460 volts, refrigerant type, excellent condition

SULLAIR ES8-30H/A 30 HP Single-Stage Fluid Rotary Screw Air Compressor, with 53,186 Run & 49,602 Load Hrs. (As of 11/2023)Specifications: -- Cap. 111 ACFM. -- Rated pressure 60 - 125/135 PSIG. -- Noise level 85 dBA.Equipped with: -- E-Profile rotor design air end. -- 30 HP 3,530 RPM Motor. -- Air-cooled aftercooler. -- SULLAIR “SUPERVISOR II DELUXE"; Microprocessor controller & graphic monitor system, with LCD Display, Touchpad, Constant pressure & temperature readout of pressure, Power failure auto restart, & Automatic start/stop.

SULLAIR LS-10, 30 HP SCREW AIR COMPRESSOR: -- Specifications:30 HP Motor, rotary screw air end, approx. 115 PSIG - 125 PSIG max; Mounted upon 150 Gal. receiver tank.Approx. Dimensions: 64" x 32" x 65"; Approx. Weight: 2,500 lbs. -- 2,630 Approx. total operating hours. Hour meter: Inoperable.

SULLAIR 10B-50 ACAC Rotary Screw Compressor (Open Type)Specifications: -- 50 HP - 1,770 RPM Motor, rotary screw air end, 100-110 max. PSI, approx. 180 ACFM; (2) asymmetrical lobe profile rotors only make contact on a lubricated pitchline to virtually eliminate cap. or efficiency loss. -- Equipped with: -- Tapered roller bearings on discharge and cylindrical bearings on inlet for high load carrying capacity. -- Pressurized fluid lubrication & cooling of Compressor with rigid piping & tubing; efficient 2-stage air/oil separation with replaceable element. -- Spin-on fiberglass fluid filter, Heavy Duty inlet air filter, cap. modulator stabilizes system pressure and matches output to demand (minimizes need for air receiver & reduces wear caused by start/stop). -- Includes: -- Electro-mechanical gauges & controls, air after-cooling.

SULLIVAN PALATEK D185PJD AIR COMPRESSOR (GAS/DIESEL): -- Specification:Mobile Air Compressor with JOHN DEER 4024TF281A, 2.4 L (4) cylinder diesel engine; PINTLE hitch. 29-Gal single fuel tank, 210 CFM (5.9 m³/Min.) @ 100 PSIG., idle speed 1,650 RPM, full load speed 2,500 RPM. -- Equipped with:Tapered roller bearings, adjustable pressure from 70 - 100 PSIG. large, 108 mm & 127 mm dia. twin screw air end & automatic 0 - 100% capacity control, with two stage dry type air filter, oil level sight gauge.One-piece canopy removable in a matter of minutes for ease of serviceability and maintenance. Pitched roof to allow water drainage, meets 2010 US EPA sound requirements. 15" Wheels with steel belted radial tires. -- (1,893) Hours on the unit.

MLS Number 10170463 Sullivan-Palatek 5OUD Air Compressor 50 HP New shaft seal

Sumitomo 40" Whole Log Metal Detector with infeed and outfeed wheels, Trough, Electronics. With Trough Actual Pass threw is 31" Wide x 36" Tall. Set in Place Hook up and Roll.

SUMMIT PR-9S 2-Ram Horizontal Baler -- Motor: 60 HP. -- Main Cylinder: 9". -- Eject Cylinder: 8". -- Feed Opening: 60" x 44" x 46". -- Cranston Wire Tie. -- Infeed Conveyor. -- Loaded onto your Truck.

Sumner 60" 12 Knife Stationary Chipper

Sumner 8 Knife Chipper

Sunrise Mat Drill Good operating condition Please see videos

Superior Systems 75HP paddle wheel fan, material handling fan Fan wheel size: diameter 33”, width 9”, thickness 3/8”+, Inlet 19” diameter, Outlet 18” x 16”, Reliance motor: 75HP, 1780 RPM, 460 volt, frame 365T, encl.: TEFC, Fan has been repainted blue Test run of fan with demonstration available

700 HP/150 PSI Superior Wood Fired Boiler (Rebuilt in 2018) Also included: All Boiler Controls in Room

Supreme Mfg rollcase 20" wide x 20' long, 6" dia rolls, 1 7/16" dia shafts, electric drive, BRAND NEW!!