Sawmill Equipment For Sale

General Thermodynamics Genset Set up for 480 volts Low Hrs., only 1,728 hrs., 275 KW, Cummins Deisel. Always started very well and ran extremely smooth.outside enclosure has easy access doors all around. Deisel tank holds enough to run genset for at least 24 hrs.+ Cummins Diesel engine

Globe 5 head panel trim saw 5 powered adjustable heads, Lug chain feed air cylinders to raise or drop saw heads Approximate panel capacity: 8 feet WIDE X 26ft LONG Prior used of saw was cutting large full size sheets (8ft+ x 26ft+?) at a particle board manufacturer- directly after sheets came out of the press. Saw has been removed in one piece to reduce reinstallation time & cost- contact us for a delivered price to your location. Stored inside our warehouse Lugs on chains have micro adjustment bolt ( brass) Brands of chain: Woodward & White Contact us for additional details, photos and measurements Approximate shipping information: Overall width: 14 ft. 6inches Overall height: 6 ft. Overall length: 33 ft. 4 inches+- Price includes loading. contact us for a delivered price to your location.

MLS Number 10689968 Globe 5 Head Panel Trim Saw Approximate panel capacity: 8 feet wide X 26ft long Saw was cutting large full size sheets (8ft+ x 26ft) at a particle board manufacturer Lugs on chains have micro adjustment bolt ( brass) Air cylinders raise and drop heads Brands of chain: Woodward & White Overall width: 14 ft. 6inches Overall height: 6 ft. Overall length: 33 ft. 4 inches+-

2025 GoFast Trim Saw. 4 Saws, 12'. Used only 4 Months. #CC0013

2022 GoFast 5hd Trim Saw. #C991

GoFast 2-Head Resaw 10 HP main motors Go Fast Board Deduster

2023 Go Fast 2 Head Resaw $25,000

Go Fast 3 Head Resaw Line with Return System $110,000

GoFast 3hd Bandsaw. with roller guides. 15hp motors. 480V. #00918 Video Link: https://youtube.com/shorts/nDJYcv-RLtc?feature=share

Go-Fast single head resaw, Hydraulic Drive, includes multiple new bands and roller guides, working condition.

2023 Go Fast 6x6 Resaw 15hp motor 480V Good Condition

GO FAST 2-Head 6 X 8 Master Resaw w/6" x 8" Cut Cap. Specifications: -- 15 HP TEFC motors, max. blade height 5-3/4" from conveyor belt x 8" wide; 20"; dia. bandwheels; self-contained hydraulic system with feed speed from 0 - 150 FPM, 6" wide feed belt conveyor and return; and top mounted holddown wheel. -- Complete with: -- Pneumatic blade tensioning system; heavy duty 2-7/16" arbor and bearings; easy crank for adjustable blade position; 3" right-side fences. -- Includes: -- Operator return table; 15'-1" x 1" wide bandsaw blades; 4" square dust chutes (square to round transitions available). Options available: -- Secondary hold-down wheel; outfeed speed-up roller; ripsaw fence attachments; & more.

GO FAST 6 X 12 Master Resaw w/6" x 12" Cut Cap. Specifications: -- 20 HP TEFC motor, max. blade height 5-3/4" from conveyor belt x 12" wide; 20"; dia. bandwheels; self-contained hydraulic system with feed speed from 0 - 150 FPM, 10" wide feed belt conveyor; top mounted holddown wheel. -- Complete with: -- Pneumatic blade tensioning system; heavy duty 2-7/16" arbor and bearings; easy crank for adjustable blade position; 3" right-side fences. -- Includes: -- Operator return table; 15'-1" x 1" wide bandsaw blades; 4" square dust chutes (square to round transitions available). Options available: -- 22 HP Gas Engine; 10 HP 1-Phase; 575 Volt 3-Phase; secondary hold-down wheel; outfeed speed-up roller; ripsaw fence attachments; & more.

GO FAST 6 X 6 Master Resaw w/Powered Return Specifications: -- 15 HP TEFC motor, max. blade height 5-3/4" from conveyor belt; 20"; dia. bandwheels; self-contained hydraulic system with feed speed from 0 - 120 FPM, 6" wide feed belt conveyor; top mounted powered holddown wheel. -- Complete with: -- Pneumatic blade tensioning system; heavy duty 2-7/16" arbor and bearings; easy crank for adjustable blade position; 3" right-side fences. -- Includes: -- Self-adjusting powered belt return conveyor; 15'-1" x 1"-1/1/4" wide bandsaw blades; 4" square dust chutes (square to round transitions available). Options available: -- 20 HP Electric Motor; 22 HP Gas Engine; 10 HP 1-Phase; 575 Volt 3-Phase.

Go Fast Resaw 15 HP Motor Put under power to test, never put into production.

Go Fast 5-Head Resaw Unit was cut into two pieces and can be put back together with a weld in the middle. Approx layout is 31' x 8'

Goring Kerr metal detector, 50"x 45" opening, new electronics - Call Jeff for more info at 574-370-5050

GPI M60MD Low Profile Vertical Baler Specifications -- Bale size: 30";x 60"; ≤ 30";. -- Bale weight (OCC): ≤ 800 Lbs. -- Feed opening: 24" x 60". -- Ram force: 57,805 Lbs. -- Motor size: 5 HP. -- Cylinder size: Twin 4" Bore; 32" stroke. -- Cycle time: 33 Seconds. -- Bale tying: Manual wire; twine; strapping. -- Loading door opening: 24" x 60". -- Unloading door height: 39". -- Operating height: 95-3/4". -- Overall depth: 37". -- Overall width: 78". -- Depth with door open: 73". Features -- Safety interlocks and shielding of all shear & pinch points. -- Loads, ties, & ejects bales from the front of the machine. -- Hydraulic eject system. -- Fully automatic compression cycle. -- Low profile operates under a standard 8 foot ceiling. -- Energy efficient 2-stage pump. -- Reliable and durable hydraulics. -- “I"; Beams & heavy channel used in structural construction. -- Ships upright for easy installation. -- Comes with: Casters for simple and easy maneuverability. -- Meets or exceeds OSHA or ANSI Z245.5 safety standards. -- Made in the U.S.A.

GRC/AIR PURIFICATION METHODS T400-96-10 Pulse Jet Dust Collector With Rotary Air Lock. -- Designed for approx.18,800 CFM @ 101 air-to-cloth ratio; about 1,885 sq/ft of filter media capacity consisting of (96) 12 oz. filtration bags; each 10' long x approx. 7.5" dia.and mounted on galvanized bag cages. -- Bags are accessed via top thru (4) hinged doors. each door contains 24 filter bag/cage assemblies. -- Features: Pulse jet cleaning of filter media controlled by GRC PSS02 Timer Board lets collector remain online during cleaning process (requires 100 PSIG). Top compressed air chamber discharges air thru a bank of GOYEN diaphragm valves, sequentially triggered by timer thru A 203 3-way solenoid valves. -- Includes: BIB 364 Fan floor-mounted Blower powered by a belt-driven 60 HP motor. Approx 38" fan inlet Dust discharged from hopper via bottom poweref 9" screw auger feeding a GRC 113-21124 Rotary Air Lock. A floor-mounted MH Transfer Fan can discharge waste into a nearby enclosed container (Not included).. Note: Picturred Dust Bin is not included. -- Complete with: Structural steel stand; access ladder/platform. -- for Dismantle, Prep, Loading. Freight please call for quote.

Grecon And Flamex Controller Cabinets FM25000