Sawmill Equipment For Sale

NEDERMAN S-1000 BAG FILTER Dust Collector w/ Auto Bag ShakerThe NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. It's the ideal solution for a smaller shop or single work-cell operation.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 360 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 16". Includes: -- Auto Bag ShakerAvailable in 208/230/460 V, 60 Cy, 3 Ph. Must specify Voltage at time of orderAvailable option:- Aluminum Impeller: - 45 Gallon Drum Discharge - Single Drum (3 REQUIRED)- 230 Gallon Dump Bin: Available spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN S-750 BAG FILTER Dust Collector w/ Auto Bag ShakerThe NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- Specifications: 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 11". -- Available in 208/230 or 480 V, 60 Cy, 3 Ph. Must specify voltage at the time of orderIncludes: -- Auto Bag ShakerAvailable options:42 Gallons Drum Discharge - Single Drum (3 REQUIRED)230 Gallon Dump BinAvailable spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN - NFSZ 3000-2: Modular Filter with Two Modules, Variable Frequency Drive & Rotary Air Lock Waste Discharge 12,000 CFM Approx. @ 6.56 to 1 air-to-cloth ratio; negative pressure; expandable Heavy-Duty Baghouse Dust Collector System.Designed for: Small to medium-sized air flows with large material concentration (dust loading).Specifications -- Total 1,830 sq./ft. (170 sq./m) of filter area; total of (100) filter bags. - Each module contains: (50) Filter bags @ 915 sq./ft. filter area per module. -- Consists of (2) Filter module sections with: Combined explosion & access door in each section; each with: 2 HP Regenerative Fans for cleaning of filter media. -- Unit is ATEX rated. Hopper for collected material to Rotary Air Lock (RAL) discharging into a waste bin (bin not included). -- Equipped with: (1) Ground-mounted 50 HP - 1,800 RPM TEFC direct drive motor with: VAGON Variable Frequency Drive & NEDERMAN "R56-500-0" Blower Package with: 20" Inlet pipe to fan inlet box.Filter housings are under negative pressure and fan is mounted on the clean air side. -- Fan Capable of approx. 14,600 CFM; motor & fan are a common steel base/frame with ground level installation. -- Features & Includes: Variable Speed motor drive; includes: Certificate of Conformity for Components (USDecla034US-B); Support Stand. -- Complete with: (2) Separate electrical panels. - For VFD Drive & Control panel: Remaining starters and controls. Drain with plug: Quick open access doors and inlet flange. -- Includes: Approx. 22" outside pipe filter header to fan inlet; square to round fan discharge adaptor; approx. 10' high support steel structure. -- Baghouse Dimensions are: 94.5 x 94.5" (2400 x 2,400 mm) for the two modules.Height of baghouse shell: Approx. 167" (4,250 mm), not including support legs. -- Actual model: NFSZ 3000 2HJ

NEDERMAN - DANTHERM NFK3000 8+2 Filter Dust Collection System. Full-Featured with Return Air, Abort Gate, Non-Return Explosion Valve, Spark Detection, and Rotary Air Lock with Dual Relay Transfer Fan., 40,000 CFM approx Capacity set up @ 6.3 to 1 air-to-cloth ratio, (design dependant). Consistsf of (8) filter modules under positive pressure and (2) entry (dust fallout modules), expandable Heavy Duty Baghouse Dust Collector System. Designed for medium to large-sized air flows with large material concentration (dust loading).Features: Variable Speed motor drive. (2) 32" High Speed Abort Gates and (2) 32" Explosion Isolation Flap Valves CARZ - Nederman. 2-Zone Spark Detection for (2) Process Air Lines to Filter and (2) Return Air Lines.- Zone 1 Spark Detection – 2 x extinguishing sets in 28"; duct to be located a minimum of 23’ from detector set in 40"; duct between fan and dust collector- Zone 2 Spark Detection – 2 x 32"; high speed abort gates to be located in minimum of 10’ from zone 2 detector sets in 40"; duct.Specifications: -- Total approx. 7,320 sq. ft.of filter area, total of (400) filter bags. Each module contains (50) filter bags @ 915 sq. ft. filter area per module). -- Consists of (8) Filter module sections with combined explosion and access door in each section, each with 2 HP regenerative fans for cleaning of filter media. -- Unit is ATEX rated. Hopper for collected material to a NRSZ-10 Rotary Air Lock (RAL) discharging into a Dual Relay System dust transfer with T.40-315 Relay Fan – 20 HP -- Equipped with: (1) Ground-mounted 200 HP - 1800 RPM TEFC direct drive motor with Variable Frequency Drive and NEDERMAN 40" Material Handling Fan package with 40" inlet pipe to fan inlet box. -- Electrical: NFKZ Control Panel. Separate control panel with motor starter for main blowers. -- Complete with: Support stand (separate steel support) is not included. .Drain with plug: quick open access doors, (dual purpose Explosion Relief Doors) and inlet flange; -- Includes: Approx. 40" Trunk line pipe filter header to fan inlet, square to round fan discharge adaptor, and approx. 3' high support steel structure. -- Baghouse dimensions are: 94.5" square (2,400 x 2,400 mm) for each module.Hence approx. shell overall length is 945" (78.75'). Depth is 94.5". Height of baghouse shell is approx. 167" (4,250 mm), not including support legs. -- Actual model is NFK3000-8HJ-2BL

Used NYB fan , series 20 GI, 38” wheel, 21” inlet, 50HP 50 HP, other HP motors available The fan has been primed & repainted in Feb. 2025 Inlet diameter: 21-1/2” Outlet size: 20-1/2” X 17” Wheel size & type: 364 DH Wheel Diameter: 38” +-, Shop Number: B12787 Year: 2007 P.O. # 15745 Disc.: UB ROT: CW,. We have other fans available Dust cyclones are also available A Video of fan running is available We provide a wooden pallet for shipping Shipping dimensions--without pallet: 80” wide x 64” long x 63” tall detached fitting Weight with pallet: 1,800 LBS, Contact us for a freight rate.

New York Blower Company Series 20 GI Fan Fan Size 29 DH Good Condition

NEW YORK BLOWER Fan - 304 AF-FORTY AF-40: Centrifugal Blower/Motor; approx. 21,000 CFM @ 30"; SP NEW YORK BLOWER. -- Complete with: 200 HP direct drive motor; 3,565 RPM; 460 Volt; "444TS" frame. -- Backward Inclined; high pressure Airfoil Wheel; NYB "AF-40" Fans: Extend the pressure capabilities of backward inclined fan designs to the higher pressures found in heavy industrial process applications such as: Boiler forced-draft; combustion air; solvent recovery; recirculating air. -- Owner states: This fan is unused. -- Weight: 2,664 Lbs.

NEW YORK BLOWER - 362 PLR: Air Handling Fan -- 50 HP; 1,180 RPM NEMA premium Inverter Motor. -- 56.9 AMPS @ 460 V; 60 Cy; 3-Phase. -- 27" PLR Wheel. -- 40" x 27" Flanged outlet. -- Dimensions: 71" L x 70" W x 68" H; Weight: 1,200 Lbs.

New York Blower Co. Shop# R13016-100, Size 407RTS, 26" Inlet & Outlet, 60HP Motor, RTS Fan.

NYB GP Size 182 Bloer with Electric Motor

NYB 28" Blower

New York Blower Company 36" Pressure Blower, 15hp Baldor electric motor, fan direct mount on motor

Newman Whitney RH Drop Saw Trimmer

Newman K 2S Double End Trimmer

NEWMAN Trimmer System. Model KNO 24. Will trim 8' to 16' with adjustable '0' saw. Trimmer includes 7.5 HP motors on each saw with aluminum wheel hold downs; saw blades; chain type waste conveyor in trimmer; electric variable speed feed chains. System includes: 5 strand lumber deck with 81X chain by 13' long with lumber stops; 4 strand tipple to discharge boards when raised; 6' x 5 strand board dealer with 5 dealer wheels to feed boards to trimmer; 25' long x 30" wide lumber belt under tipple; 30' x 24" waste belt from trimmer waste chain. NOTE: Equipment loaded on your truck and  located in Biscoe, NC. Price $28,900.00. OBO

Newman K-20 Double End Trim Saw Adjusts up to 16'

K-20 Like New 12’ I, F10’O, F 20’ Waste belt, Soft Start, All Controls

Newman KNO 24 lumber trimmer, (9) station drop saw, will pass rail tie’s, includes waste conveyor & infeed this saw is out and ready to load in your truck. Ref #188

Newman K20 Trim Saw (2) Blades - Aprox 20" diameter Infeed deck is about 40' long. No chain is included.